Ships free with Plus

  • 4" centers
  • 36" reinforced 3-ply hose
  • 1.15 GPM spray valve, no O-rings to leak
  • Double lever handles; 21" riser
  • EPAct 2005 Compliant
  • Includes hardware for installation on a sink backsplash
  • Includes hardware for installation on a sink backsplash

UPC Code:




Usually Ships in 1-2 Business Days

Fisher Pre-Rinse Units

Fisher Pre-Rinse Units

Hi, this is Jeff. Today I'd like to talk to you about Fisher pre-rinse units. The Fisher spring-style pre-rinse is by far the most popular design in the industry. Fisher pre-rinses have stainless steel seats, guaranteed for life; two-part check stems to prevent any cross-flow, because we have the third valve out here; heavy-duty wall thickness riser pipe, brass chrome plated; a wall bracket with not only one, but two set screws holding it for extra durability; a heavy-duty spring; a pre-rinse hose that inside the armor is a three-ply hydraulic aircraft hose; an insulated handle, and an insulated squeeze lever for comfort; and the Ultra-Spray valve that only uses 1.1 gallons per minute and is test proven the fastest at blowing garbage off of dishes. The way we engineer this pre-rinse unit is that this spray valve stays at the proper, optimum height for pre-rinsing, which is about right there (12" to sink), which is the proper height. Should your application require the convenience of having a faucet with the pre-rinse, use a Fisher add-on faucet. When you order a complete Fisher pre-rinse with an add-on faucet, what we've done at the factory is engineered the assembly so that the spray valve will always be in the same optimal position. As our standard riser pipe is 21", this is now 21" with the add-on faucet so that the spray valve stays in the proper, pre-rinsing position. Now let's see how this works. As you can see, we've installed the add-on faucet onto our pre-rinse. The add-on faucets come with either a 6" swing spout or all the way out to a 16" swing spout. The add-on faucet has stainless steel seats guaranteed for life, a two-part swivel stem, which means lower maintenance, and this assembly now keeps our spray valve at the optimum pre-rinsing height, which is approximately 12" from the bottom of the faucet to the blue dish guard bumper. So that's a pre-rinse with an add-on faucet. In order to keep that pre-rinse spray valve at the optimal height, go into our catalog, find the pre-rinses that clearly show add-on faucets with the pre-rinse, and specify that model number with the spout length you need on that add-on faucet. Okay, so now let's take a look at the Fisher swivel-style pre-rinse. The swivel-style pre-rinse is designed for pre-rinsing a rack of dishes at a time, so as the rack comes through, you simply pre-rinse the dishes a rack at a time. There's plenty of flexibility to do that. The way that the water comes up and goes down...it's a straight path -- the hose is straight -- increasing hose life. This pre-rinse has got all of the features as the spring-style, as far as the stainless steel seats and swivel stems; the hose is a three-ply aircraft hydraulic hose; insulated handle; and the Ultra-Spray valve. Fisher swivel-style, or rack-at-a-time pre-rinsing. Okay, so those are the Fisher pre-rinsing units. Thank you for watching!

Copy and paste the embed code above.

Pre-rinsing is an important step of dishwashing, so make sure your system is as efficient at possible! With Fisher pre-rinse units, you can be sure that food debris is rapidly removed and that racks of dishes are quickly prepared for further washing. Watch this video for a look at the features that distinguish Fisher units from others, and find out how Fisher can benefit your operation!

Fisher Ultraspray Pre-Rinse Valve

Fisher Ultraspray Pre-Rinse Valve

Hi, I’m Jeff and today I’d like to talk to you about the Fisher ultra-spray valve. Long before the EPA Act of 2005, Fisher has always been the leader in water conservation in spray valves and pre-rinse units. Today the 2949, the Fisher ultra-spray valve, is standard on all Fisher pre-rinses. The ultra-spray is also interchangeable with all brands. The reason why is, is that the thread that screws into the end of the handle is a universal thread. It’s a 3/4 14 thread. It fits virtually every pre-rinse out there. You can always tell it’s a Fisher ultra-spray valve by its distinctive blue bumper. So let’s examine some of the other features of the spray valve. The first thing is, is that only Fisher uses the solid bronze handle and what this does is it allows the plunger to be pushed down all the way to allow full flow. Other spray valves use some kind of a plastic handle and overtime the plastic bends and distorts and the operator ends up having to stick a penny or some duct tape in there to get that plunger to push down all the way. Fisher also incorporates a system where we don’t use any O rings up in the nozzle part of it. You can actually take a knife and cut the dish guard bumper all the way off and it would be a no leak spray valve because the actual jet nozzle is pipe threaded and glued right up under the faucet body housing. The nozzle itself is unique to Fisher in that it’s a 1.1 gallon per minute nozzle. The water comes out very much like a power washer type spray of a knife edge spray, so at about 10 inches, 12 inches off the dish you have an oval spray pattern and it is test proven that it is the fastest at blowing garbage off the dish. Fisher ultra-spray is interchangeable with all brands and here is a good example. Another major brand right here removes this old broken spray valve and you’ll notice that the Fisher spray valve will screw right into a competitors handle. Fully interchangeable with all brands. When selecting a pre-rinse, choose the spray valve that set the standard.

Copy and paste the embed code above.

Check out this video on the Ultraspray pre-rinse valve from Fisher! It demonstrates the uses and functions of the ultra-spray valve and what sets it apart from other major brands and competitors.

Fisher Replacement Hoses

Fisher Replacement Hoses

Hi, this is Jeff. Today I’d like to talk to you about pre-rinse replacement hoses. At Fisher we make a direct replacement hose for Fisher pre-rinse. We also make a universal hose that has an adapter and a new handle inside the packaging. This universal hose fits brands like T&S Brass, Krowne Component Hardware, Chicago Faucet and other imported lines. When your pre-rinse hose fails it’s the perfect time to upgrade to a Fisher hose. Now let me know you why it’s actually an upgrade. Inside this stainless steel armor we use a 3 ply aircraft hydraulic hose. It actually has 3 plies of rubber in there reinforced by nylon. Our hoses are designed to last 3 times longer. Now what everyone else uses is a single ply, non-reinforced hose. This is the reason why a Fisher pre-rinse hose lasts 3 times longer. Now I’d like to show you how our universal hose fits on any other brand of pre-rinse. This is a different brand pre-rinse riser pipe; this is where the hose connects. So the first thing were gonna do is we’re gonna wrap this fitting right here with some white plumber’s Teflon tape and we’re gonna screw that adapter in that we saw in the packaging onto the top of the riser. And then, out of that same packaging were gonna pull out our standard Fisher hose, wrap this area here with the white Teflon tape and screw it into the riser. I’ll do it backwards just because it’s easier. There we go. So it’s screwed into the top of the rises. Now, what were gonna do is, not using any Teflon tape because inside the handle are two black washers and were gonna screw the handle onto the thread on the end, tighten it down hand tight, and then if it happened to be a different brand pre-rinse, a different brand spray valve we’ll screw right into our handle. Well now would be a really good time to upgrade to the Fisher ultra-spray. And so the Fisher ultra-spray also screws onto it. So as you can see, even regardless of the brand of pre-rinse the Fisher pre-rinse hose fits, every time.

Copy and paste the embed code above.

Fisher offers two different types of pre-rinse replacement hoses. One that is made for Fisher hoses only and one that is a universal hose that can adapt with other models! Watch this video to learn more about these two types and how they work!

Fisher Interchangeability: Upgrading Your Pre-Rinse Unit

Fisher Interchangeability: Upgrading Your Pre-Rinse Unit

Hi, I’m Jeff. Today I’d like to talk to you about pre-rinse components that are interchangeable and what we like to call upgradeable. You might have a broken pre-rinse, that’s got a bad spray valve on it or the pre-rinse has got a hose on it that doesn’t work. Rather than change out the complete pre-rinse that is costly and there’s usually a plumbing bill involved in it, we’ve got some ideas here for you that will save you money and make your pre-rinse operate more efficiently. This is one of the ways to upgrade your pre-rinse would be with the Fisher 2949- Ultra Spray valve. This is the one that set the standard, this is the one that the EPA Act of 2005 was written around, and this is the one that President Bush signed into law. This is an easy, easy fix, you simply take off your old spray valve and screw on this one and you’re back up and running again. If your wall bracket brakes and comes loose continually you may need an additional wall bracket or simply upgrade to the Fisher wall bracket that is fully adjustable all the way out to 12 inches away from the wall. Quick easy fix if you have wobbly pre-rinses. Pre-rinse replacement hoses, this is the only hose on the market with a 3 ply aircraft hydraulic hose on the inside. It lasts 3 times longer and with this adapter right here in the packaging it fits all brands. This is an absolute no brainer. Pre-rinse hoses have a tendency to be the one component on a pre-rinse that seem to wear out the quickest. Fisher fits all brands. You don’t even have to know what brand of pre-rinse you have, when you bring home a Fisher, it will fit. When you’re talking about pre-rinse springs, this is one of the strongest springs in the industry. This one will keep the hose up, out of the flood zone of your sink, you won’t need a vacuum breaker if you have a really good spring. When it comes to add-on faucets. Add-on faucets typically have a 3/8 pipe thread, and when you’re cutting a 3/8 pipe thread it doesn’t matter who you are or how you cut it, it’s a 3/8 pipe thread. It’ll be interchangeable. There are 4 all Fisher add-on faucets for pre-rinses will fit all other brands of pre-rinse units. These are the pre-rinse components that are interchangeable. Now let’s go see how they work. Ok, so what we have here is a competitor’s pre-rinse and what were gonna do is change out the spray valve, the hose, the spring and even add a wall bracket increasing the quality components of the pre-rinse to Fisher. So that’s how the interchangeability of Fisher components can upgrade any pre-rinse.

Copy and paste the embed code above.

Check out this video to learn how Fisher can help you upgrade your pre-rinses! Fisher offers pre-rinse components, such as spray valves, hoses and springs that are interchangeable, allowing them to adapt with any other brand.

Fisher 2949 Ultra Spray Valve Review

Fisher 2949 Ultra Spray Valve Review

Introducing the Fisher Ultra-Spray 2949 spray valve! For a side-by-side comparison of the spray valve’s performance, the Ultra-Spray and several leading competitor valves were set to spray a completely soiled dish to see how much could be removed over 10 seconds. Ultra-Spray 2949: In 10 seconds, most of the soil has been removed from the dish! Leading competitor valve A: In 10 seconds, about 1/2 of the soil has been removed from the dish. Leading competitor valve B: In 10 seconds, between 1/3 and 1/2 of the soil has been removed from the dish. Leading competitor valve C: In 10 seconds, between 1/3 and 1/2 of the soil has been removed from the dish. Decide for yourself. Fisher. www.fisher-mfg.com. 800-421-6162

Copy and paste the embed code above.

See how much cleaner your dishes will be after just 10 seconds of spraying when you compare three leading competitors with the Fisher 2949 Ultra Spray Valve! This difference is absolutely clear, and it will save you time and money.

Fisher 2610 Specs
Hose Length 38 Inches
Add-On Faucet None
Faucet Centers 4 Inches
Handle Type Lever
Made in America Yes
Maximum Water Temperature 140 Degrees F
Pre Rinse Unit Type Hose and Spring
Spray Valve Flow Rate 1.15 GPM

Customer questions about this product

How is the pre-rinse hose length measured?
Unless otherwise specified, the quoted hose length includes any grips or connectors at the end of the hose, so the actual working length of the hose may be slightly less than described. Please refer to the product's specsheet for more detailed dimensions.
Ask your own question!

Fisher 2610 Details

This Fisher 2610 backsplash mounted pre-rinse faucet is the perfect way to remove stubborn soil from dishes and cookware so that they can be thoroughly cleaned! This unit features a 36" reinforced 3-ply rubber hose with a stainless steel external jacket and end fittings for superior durability in any setting, while the 1.15 GPM spray valve is designed to deliver maximum spray power and minimal utility costs. This spray valve is also engineered without O-rings so that you have fewer common wear parts that can leak and need replacing. The simple spring design helps hold the hose in place and provide additional support without limiting your mobility.

This faucet's 4" centers make it easy to install, as well. The water flow is controlled by two lever handles.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

  • Made in America

    Made in America

    This item was made in the United States of America.

Resources and Downloads for
Fisher 2610

Specsheet Specsheet Installation Instructions, Wall Mount 4 Instructions Warranty Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register