$347.05/Each

Ships free with Plus

or enter your email to be instantly sent the price!

Why do we do this?

Start a Live Chat with a Customer Service rep to receive the price!
Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST.

Due to a manufacturer's price increase, this price will increase by 5.00% on 01/01/25

Earn up to $10.41 back (1,041 points)with a Webstaurant Rewards Visa® Credit Card

Quick Shipping

Usually ships in 1 business day

Product Overview

  • Single hole base; 1/2" NPSM male inlet 18" flex hoses (5/8" compression fittings)
  • 44" flex hose; 1.15 GPM B-0107 spray valve
  • Lever handles with color coded indexes
  • Quarter turn Eterna compression cartridges with spring checks
  • Polished chrome plated brass body
UPC Code:671262000949

Specs

Quantity
1/Each
Shipping Weight
12.41 lb.
Hose Length
44 Inches
Faucet Width
7 7/16 Inches
Faucet Height
42 1/16 Inches
Add-On Faucet
None
Cartridge Type
Compression
Faucet Centers
Single
Features
Flex Inlets Included  Made in America
Finish
Chrome
Handle Type
Lever
Material
Brass
Mounting Style
Deck Mounted
Pre Rinse Unit Type
Hose and Spring
Pressure Rating
125 PSI
Spray Valve Flow Rate
1.15 GPM
Temperature Rating
40 - 140 Degrees F
Type
Pre-Rinse Units
Water Inlet Size
1/2 Inches

Details

Rinse scraps of food, sticky crumbs, and leftover sauce off of your dishes prior to washing them with the T&S B-0113 deck mount single base pre-rinse faucet! This faucet features a 1.15 GPM spray valve that is connected to an overhead assembly with a 13" spread, and the specialized quarter turn Eterna compression cartridges enable superior and long-lasting product life.

The T&S B-0113 deck mount pre-rinse faucet features two 18" long flexible stainless steel supply hoses with 5/8" O.D. compression fittings that are removable to convert to 1/2" NPSM male connections. The whole unit can be mounted in a 2 1/4" diameter hole on decks up to 1 1/4" thick.

Overall Dimensions:
Faucet Height: 42 1/16"
Faucet Width: 7 7/16"

Attention CA Residents:

Customer questions about this product

Can I get a spray valve with a higher flow rate (GPM)?

A: The maximum flow rate for all commercial pre-rinse spray valves produced after January 28, 2019 is 1.28 GPM – more specific regulations may apply based on the valve’s spray force in ounce-force (ozf).

Product Class 1 (5 ozf or less) – Max Flow Rate: 1 GPM
Product Class 2 (5.01 - 8 ozf) – Max Flow Rate: 1.2 GPM
Product Class 3 (over 8 ozf) – Max Flow Rate: 1.28 GPM

These regulations do not impact spray valves made before January 28, 2019, and are implemented by the US Department of Energy in an effort to improve energy conservation.

Can I use this product to serve drinking water?

This product is not intended for use in applications where potable (drinking) water is dispensed for human consumption.

Does this item have any additional agency approvals and certifications?

There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.

How do I use a wall bracket to stabilize a pre-rinse faucet?

Pre-rinse faucets with a riser may include a wall bracket to help use the wall for added stability. Pre-rinse faucets without a riser will generally not include or need a wall bracket.

If your unit comes with a bracket, or you plan on adding one, the bracket can be installed at whatever height you prefer, but to be effective it should be placed far enough above the base so as to inhibit movement to the riser – placing too close to the base may make it ineffective.

If you intend to use a wall bracket, consider potential concerns with the installation location, such as shelving or windows behind the faucet, that might limit where you can place the bracket.

How is the pre-rinse hose length measured?

Unless otherwise specified, the quoted hose length includes any grips or connectors at the end of the hose, so the actual working length of the hose may be slightly less than described. Please refer to the product's specsheet for more detailed dimensions.

I have a chemical injection system on my compartment sink. Can I use my pre-rinse faucet to supply water to it?

Yes! Item B-TEE-RGD is a rigid tee assembly that installs easily into an existing T&S pre-rinse faucet (or you can use it on a brand new faucet) and provides you with a means to deliver water to a chemical injection system, or other, similar sink accessories that may require a water supply.
Ask your own question!
  • Made in America

    Made in America

    This item was made in the United States of America.

  • 1 1/2" Water Connection

    1 1/2" Water Connection

    This unit comes with a 1 1/2" water connection for water supply.

  • 1/2" Water Connection

    1/2" Water Connection

    This unit comes with a 1/2" water connection for water supply.

Customer Reviews

5.0

Rated 5 out of 5 stars

1 Customer Reviews

1 reviews rated this 5 out of 5 stars.

0 reviews rated this 4 out of 5 stars.

0 reviews rated this 3 out of 5 stars.

0 reviews rated this 2 out of 5 stars.

0 reviews rated this 1 out of 5 stars.

Frequently Mentioned

  • clean
  • easy
  • great
  • located
  • manufacturer
  • necessary
  • part
  • piece
  • pressure
  • quickly
Rated 5 out of 5 stars
Rated 5 out of 5 stars
Review by

Shelley W. from Belly Ice Cream Company

Posted on 04/04/2016

Verified Purchase

Great pressure, easy to clean, ours showed up missing a small but necessary piece from the manufacturer. Webstaurant located a replacement part very quickly and had it shipped right away


Find Related Products