$209.99/Each

Ships free with Plus
  • 8" centers; adjustable from 7 3/4" to 8 1/4"; 1/2" NPT female inlets with 2" flange
  • 44" flex hose; 1.42 GPM 5SV Equip spray valve
  • Lever handles with color coded screws
  • Equip ceramic cartridges; can withstand water temperatures up to 180 degrees Fahrenheit
  • Includes 6" wall bracket; 31 7/16" overall height
  • Chrome plated brass construction
  • EPAct 2005 Compliant
UPC Code: 671262565615
Shipping:

You May Also Need

T&S: Installing and Converting a Pre-Rinse Unit

T&S: Installing and Converting a Pre-Rinse Unit

Installing a pre-rinse unit. Depending on the type of T&S pre-rinse unit purchased, installation follows 1 of 2 simple procedures. A typical installation for our traditional models or a pop and lock installation for our easy install models. But no matter the method, T&S makes it easy to be up and running in no time. Now lets get started. All supplies are packaged neatly in the box to help avoid lost parts. Begin by shutting off the water supply and draining the lines. Apply Teflon tape or pipe joint compound to the water supply lines. Install the coupling flange to the water line nipple and tighten to the wall or deck. Insert the coupling nut washer and attach the faucet to the flange. Tighten the coupling nut with a wrench and then turn on the water to test for leaks. Apply Teflon tape to both ends of the riser included in your assembly. Install one end of the riser into the top of your faucet and tighten it by hand. Slide the hook halfway down the riser you just installed and tighten the screw temporarily. Hand tighten the spring assembly to the top end of the riser and then tighten it with an adjustable wrench. In the process you will also be tightening the riser you installed. It is important that the spring assembly be installed properly, with the closed coil end at the riser. Now adjust the height and position of the hook, so the spray valve hangs loosely when secured by the hook. You don't want to put unnecessary strain on the spring assembly. Turn the water supply back on and check for any leaks, making adjustments if any are needed. When installing the long riser you should also install a wall bracket assembly for added support. Also you can easily install an add-on faucet between the riser and the base faucet body. Now that the unit is properly installed, you can begin using your new T&S Brass pre-rinse unit. Just make sure your employees turn off the water at the faucet when they are done using this product. At T&S, we understand the last thing our customers need are long, tedious installations. That's why we developed easy-install pop and lock pre-rinse units for even easier installation. The pop and lock feature cuts installation time by 66%. Here's how it works. Simply slide the easy-install nut onto one end of the riser. Apply Teflon tape to the top of the threads on the riser and attach to the spring assembly. Tighten the spring body and the riser assembly with a wrench in a counter-clockwise direction. Make sure the easy-install locking washer is seated properly inside the faucet body. Grab the riser assembly and lower the easy-install end fitting into the faucet body. Press down until the end fitting pops in place. Then, lock the easy-install locking nut in place and tighten with a wrench in a clock-wise direction. What if you have a pre-rinse unit that you'd like to convert to a standard faucet? There are only a few steps necessary to perform this change. Begin by turning the water off at the source. Loosen the swivel nut and remove the riser assembly and the easy-install locking washer. Next, grease the end of the swing nozzle or gooseneck swivel. Insert the end into the faucet base, twist, and push into place. Now, tighten the swivel nut by hand and snug it up with a wrench. Turn the water on, check for leaks, and the faucet is once again ready for use. As you can see, our pre-rinse unit exemplifies our distinctive T&S quality, as well as easy installation and removal. With our unique pop and lock system. At T&S we make the installation of our products simple through innovative engineering and cutting-edge design, with reliability built in.

Copy and paste the embed code above.

This video goes over the simple process of installing or converting a T&S pre-rinse unit. With 2 easy procedures, these faucets are sure to ease your experience.

Equip by T&S 5PR-8W00 Specs
Hose Length 44 Inches
Add-On Faucet None
Cartridge Type Ceramic
Faucet Centers 8 Inches

Adjustable
Handle Type Lever
Installation Features Support Bracket
Maximum Water Temperature 140 Degrees F
Pre Rinse Unit Type Hose and Spring
Spray Valve Flow Rate 1.42 GPM

Customer questions about this product

I have a chemical injection system on my compartment sink. Can I use my pre-rinse faucet to supply water to it?
Yes! Item B-TEE-RGD is a rigid tee assembly that installs easily into an existing T&S pre-rinse faucet (or you can use it on a brand new faucet) and provides you with a means to deliver water to a chemical injection system, or other, similar sink accessories that may require a water supply.
How is the pre-rinse hose length measured?
Unless otherwise specified, the quoted hose length includes any grips or connectors at the end of the hose, so the actual working length of the hose may be slightly less than described. Please refer to the product's specsheet for more detailed dimensions.
Ask your own question!

Equip by T&S 5PR-8W00 Details

This Equip by T&S 5PR-8W00 wall mounted pre-rinse faucet features a 44" flex hose and spring design that provides plenty of versatility in a variety of warewashing applications! A 1.42 GPM spray valve makes it easy to clear food debris off of dishes before washing them, and an ergonomic squeeze handle allows easy and intuitive use. To make installation easy, it also boasts in-line check valves and 1/2" NPT female inlets on 8" adjustable centers.

- 44" flex hose with spring is great for many pre-rinse applications

- 1.42 GPM spray valve (5SV) with ergonomic squeeze handle

- Lever handles with color coded screws for durability and easy operation

- Ceramic cartridges provide excellent durability and leak-resistance since there is no seat washer

- Includes wall bracket for added support, and in-line check valves

- 31 7/16" overall height

- Durable chrome plated brass construction

Attention CA Residents: Prop 65 Warning

Resources and Downloads for
Equip by T&S 5PR-8W00

Spec Sheet Specsheet Installation Instructions Instructions Warranty Warranty Sales Sheet Sales Sheet

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Customer Reviews

  • Overall User Rating: Equip by T&S 5PR-8W00 Wall Mounted 31 1/2" High Pre-Rinse Faucet with 8" Adjustable Centers, 44" Hose, and 6" Wall Bracket

    5.0 stars from 2 reviews

    2
    0
    0
    0
    0

    People Talk About:

    Great Hose sink sprayer hook holds head faucet far easily
  • Arrange by 
    Great faucet head and hose! We use this on our three compartment sink and have had no complaints. It does not leak, it swivels easily and can reach all corners of our sink. Hose swings out pretty far, so be sure to adhere the hook that holds it back.
    Having this sprayer makes doing dishes easier. This one works great, has great water pressure and the price is good. I would recomend this sprayer to anybody.

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register
× No Thank You

Save Up To $100.49 with our Recommended Product!

Looking for a great pre-rinse faucet? Try this Regency model instead! Featuring a 38” long hose and a wall bracket to secure it when not in use, this pre-rinse faucet offers similar performance to the T&S model, but is available to you at a lower price. Use it to pre-scrap dishes quickly and efficiently in your commercial kitchen!

Your selection
  • 8" centers; adjustable from 7 3/4" to 8 1/4"; 1/2" NPT female inlets with 2" flange
  • 44" flex hose; 1.42 GPM 5SV Equip spray valve
  • Lever handles with color coded screws
  • Equip ceramic cartridges; can withstand water temperatures up to 180 degrees Fahrenheit
  • Includes 6" wall bracket; 31 7/16" overall height
  • Chrome plated brass construction
  • EPAct 2005 Compliant
Item:
5105PR8W00
Units:
Each
Shipping:
Usually Ships in 1 Business Day
When will I receive my item?
Reviews:
2 reviews
Specs
Hose Length 44 Inches
Add-On Faucet None
Cartridge Type Ceramic
Faucet Centers 8 Inches
Faucet Centers Adjustable
Handle Type Lever
Installation Features Support Bracket
Maximum Water Temperature 140 Degrees F
Pre Rinse Unit Type Hose and Spring
Spray Valve Flow Rate 1.42 GPM