Rated 5 out of 5 stars
Rated 5 out of 5 stars
Verified Purchase
Rated 5 out of 5 stars
Rated 5 out of 5 stars
Quite good, perfect size, and lightweight. It's a great deal, much better price than local prices. I would buy it again whenever I need it.
$539.82/Each
Ships free with PlusLogin or enter your email to be instantly sent the price!
Start a Live Chat with a Customer Service rep to receive the price!
Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST.
Due to a manufacturer's price increase, this price will increase by 5.00% on 01/01/25
Earn up to $16.19 back (1,619 points)with a Webstaurant Rewards Visa® Credit Card
Quick Shipping
Usually ships in 1 business day
Estimated Shipping Time
Delivery time may vary depending on your location. Use the shipping calculator on the cart page to estimate arrival times by entering your zip code. If an order is time-sensitive, check with our customer service team.
Product Overview
- 8" centers adjust from 7 3/4" to 8 1/4"; 1/2" NPT female inlets with 2" flange
- 44" flex hose; 0.65 GPM spray valve
- Lever handles; ceramic cartridges can withstand water temperatures up to 140 degrees Fahrenheit
- Includes 6" wall bracket and 15" double-jointed add-on faucet
- Chrome plated brass construction
UPC Code:400010967490
Works With"Works With" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.
"Works With" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.
$35.91/Each
$66.22/Each
$0.79/Each
T&S B-0230-KIT Inlet Kit with 24" Hoses and Elbows (1/2" NPT Male Supply Nipples x 3/8" Compression)$51.09/Each
When you need a reliable pre-rinse faucet, look no further than the B-0154-CR-C from T&S.
Having the right pre-rinse setup for your business can improve efficiency in your kitchen and dish room, and make life easier for you and your staff! This model is well-suited for most pre-rinse setups in a restaurant dishroom or warewashing area. It mounts easily to the wall and comes with a host of features to make installation and use as easy as possible, whether you need to replace an old faucet or you're using it on a brand new installation.
Made in America
This item was made in the United States of America.
NSF/ANSI/CAN 61 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.
NSF/ANSI/CAN 372 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.
Rated 5 out of 5 stars
"Quite good, perfect size, and lightweight. It's a great deal, much better price than local prices. I would buy it again whenever I need it."
Read More Reviews0.65 GPM Spray Valve
The spray valve on this pre-rinse is capable of a 0.65 GPM flow rate. This helps you to conserve water and save money on your utility bill, and also makes it well-suited for most warewashing setups. An ergonomic and heat-resistant handle makes it easy to use even during a long and busy shift, while the hold-down ring lets you lock it in a continuous spray position for as long as you need.
44” Flex Hose
The flexible stainless steel hose on this model provides great range of motion and lets you direct the water exactly where you need it. The spring helps it retain its shape and keeps the spray valve positioned above the sink.
Adjustable Wall Mount Centers
This faucet mounts to the wall using a pair of 1/2” NPT female inlets with 2” flanges. Those inlets can adjust from 7 3/4” to 8 1/4”, allowing you to fit them directly onto your facility’s water lines with ease.
Lever Handles, Ceramic Cartridges
This faucet comes with lever handles. The cartridges feature ceramic discs that open and close to control water flow rather than the seat washer setup found in standard compression cartridges. This increases durability while reducing the number of moving parts, which in turn means you’ll replace these components less frequently. Additionally, this model comes with check valves to prevent cross flow.
15” Add-On Faucet
Sometimes, it’s just more convenient to use a standard faucet. This pre-rinse has you covered with a 15” double-jointed add-on swing faucet (2.2 GPM aerator).
Chrome-Plated Brass
With its chrome-plated brass construction, this faucet provides a polished look with the durability you expect from an industry-leading faucet manufacturer.
6” Wall Bracket
Stability is important in any pre-rinse setup, and this model comes with a 6” wall bracket to help secure your unit to the wall.
Customer Q&AAsk a Question
Can I get a spray valve with a higher flow rate (GPM)?
A: The maximum flow rate for all commercial pre-rinse spray valves produced after January 28, 2019 is 1.28 GPM – more specific regulations may apply based on the valve’s spray force in ounce-force (ozf).
Product Class 1 (5 ozf or less) – Max Flow Rate: 1 GPM
Product Class 2 (5.01 - 8 ozf) – Max Flow Rate: 1.2 GPM
Product Class 3 (over 8 ozf) – Max Flow Rate: 1.28 GPM
These regulations do not impact spray valves made before January 28, 2019, and are implemented by the US Department of Energy in an effort to improve energy conservation.
Product Class 1 (5 ozf or less) – Max Flow Rate: 1 GPM
Product Class 2 (5.01 - 8 ozf) – Max Flow Rate: 1.2 GPM
Product Class 3 (over 8 ozf) – Max Flow Rate: 1.28 GPM
These regulations do not impact spray valves made before January 28, 2019, and are implemented by the US Department of Energy in an effort to improve energy conservation.
Does this item have any additional agency approvals and certifications?
There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.
How do I use a wall bracket to stabilize a pre-rinse faucet?
Pre-rinse faucets with a riser may include a wall bracket to help use the wall for added stability. Pre-rinse faucets without a riser will generally not include or need a wall bracket.
If your unit comes with a bracket, or you plan on adding one, the bracket can be installed at whatever height you prefer, but to be effective it should be placed far enough above the base so as to inhibit movement to the riser – placing too close to the base may make it ineffective.
If you intend to use a wall bracket, consider potential concerns with the installation location, such as shelving or windows behind the faucet, that might limit where you can place the bracket.
How is the pre-rinse hose length measured?
Unless otherwise specified, the quoted hose length includes any grips or connectors at the end of the hose, so the actual working length of the hose may be slightly less than described. Please refer to the product's specsheet for more detailed dimensions.
I have a chemical injection system on my compartment sink. Can I use my pre-rinse faucet to supply water to it?
Yes! Item B-TEE-RGD is a rigid tee assembly that installs easily into an existing T&S pre-rinse faucet (or you can use it on a brand new faucet) and provides you with a means to deliver water to a chemical injection system, or other, similar sink accessories that may require a water supply.
Compare to Other Products
Price
Hose Length
Add-On Faucet
Cartridge Type
Faucet Centers
Spray Valve Flow Rate
Attention CA Residents:Need Parts & Accessories?
Show replacement parts and accessories for T&S Brass and Bronze Works B-0154-CR-C today!
Resources and Downloads for
T&S Brass and Bronze Works B-0154-CR-C
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Resources
Related Items
Pre-Rinse Faucets
750 Products
Customer Reviews
1 reviews rated this 5 out of 5 stars.
0 reviews rated this 4 out of 5 stars.
0 reviews rated this 3 out of 5 stars.
0 reviews rated this 2 out of 5 stars.
0 reviews rated this 1 out of 5 stars.
Frequently Mentioned
- prices
- better
- buy
- deal
- great
- lightweight
- local
- much
- need
- perfect