This product is no longer available. We've left this page up for reference only.
- Double 10 gallon direct steam kettle with 42" wide, 24 kW, electric boiler base
- Tilting mechanisms allow you to empty contents with ease
- 2/3 steam jacketed design for faster heat-up and cook times
- Reversible operating handle with heat proof knob for safety
- Hemispherical kettle design for superior heat circulation
- 3" deep sinks with drains and splash guards
- Hot and cold water faucet with control valves
- 208V, 3 Phase
Blodgett CB42E-10-10K 208/3 Specs
- Shipping Weight
- 720 lb.
- 42 Inches
- 33 Inches
- 65 1/8 Inches
- 66.6 Amps
- 60 Hertz
- 3 Phase
- 208 Volts
- 24 Kilowatts
- 20 Gallons
- Capacity per Compartment
- 10 Gallons
- Energy Star Qualified
Made in America
- Installation Type
- Floor Model
- Kettle Jacket
- Plug Type
- Power Type
- Double Kettle
- Water Inlet Size
- 3/8 Inches
Customer questions about this product
- Does this Blodgett item require a water filter for proper usage?
- Yes. The quality of water used will greatly impact the performance of your machine. Be sure to use the manufacturer-recommended water filter, as well, or you may void the warranty on your unit.
Blodgett CB42E-10-10K 208/3 Details
Increase your production capabilities while saving energy and labor with this Blodgett CB42E-10-10K double 10 gallon direct steam tilting steam jacketed kettle with an electric boiler base! This unit features a 42" electric boiler base that provides steam for the dual 10 gallon direct steam kettles. The boiler base has an automatic water level control, a pressure gauge, and water gauge for safe and efficient operation. Plus, the boiler base can not only power the steam kettle, but additional direct steam equipment, too!
With double kettles, this unit allows you to prepare large batches of your signature soups, stews, or pasta without the hassle of ranges or stock pots. Thanks to the 2/3 jacketed design, each of the two 10 gallon kettles has 1-2 times more heat transfer surface area than a traditional stock pot. This means you'll have faster heat-up and cook times, which increases overall efficiency and production. Plus, faster cook times mean less energy used, so your utility bills will be lower.
With more even heating, there is less need for frequent stirring or "pot watching." The hemispherical bottoms ensure superior heat circulation, which helps keep the heat inside the kettles and prevents energy from being lost to the surrounding kitchen area.
The tilting mechanisms allow each kettle to tilt forward past 90 degrees so that you can empty the contents with ease. The tilt handles are reversible for user-friendly operation, and the heat proof knobs help prevent employee injuries. Plus, the base is equipped with a hot and cold water faucet to fill the kettles, 3" deep sinks with drains, and dual splash guards.
The #4 stainless steel finish resists corrosion and makes cleanup easy, and the 6" stainless steel legs have adjustable bullet feet in the front and adjustable flanged feet in the back for proper leveling. Plus, the flanged feet allow the unit to be safely secured to the floor. The boiler base has a 24 kW output. It requires a 208V, 3 phase electrical connection.
Height (with handle): 65 1/8"
Capacity: 20 gallon
CSA Design Cert
This item has been certified by the Canadian Standards Association (CSA) and meets applicable U.S. standards.
Energy Star Qualified
This item has been Energy Star Qualified by the US Environmental Protection Agency and the US Department of Energy, making it an energy-efficient product.
3/8" Water Connection
This unit comes with a 3/8" water connection.
This item meets the standards imposed by the Canadian Standards Association (CSA).
Made in America
This item was made in the United States of America.
This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL).
3/4" Gas Connection
This unit comes with a 3/4" gas connection to be installed by a professional.
CSA Blue Flame
This item has been certified by the Canadian Standards Association (CSA) and meets applicable Canadian standards for appliances using gas or petroleum fuel.
This product must be hardwired by a professional; it does not plug into a standard wall outlet.
Resources and Downloads for
Blodgett CB42E-10-10K 208/3
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Please note there is an 8% administrative warranty fee and potential for additional export fees for units that are shipped outside of the United States
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. Your warranty will be voided if installed in non-commercial or residential applications.
Leave a review of this product!
If you've used this product, log in and leave a review to tell us and other customers what you thought about it. Get paid up to $16 for submitting one of the first text, photo, or video reviews for this item. View your account for details.Login or Register