This Product is no longer availableBrowse our full selection SEE MORE PRODUCTS
Blodgett CB42D-10-10K Double 10 Gallon Direct Steam Tilting Steam Jacketed Kettle with 42" Cabinet Base
This product is no longer available. We've left this page up for reference only.
- 42" cabinet base with (2) 10 gallon direct steam kettles
- Tilting mechanisms allow you to empty contents with ease
- 2/3 steam jacketed kettles for faster heat-up and cook times
- Reversible operating handle with heat proof knob for safety
- Hemispherical kettle design for superior heat circulation
- 3" deep sinks with drains and splash guards
- Hot and cold water faucet with control valves
- Stainless steel construction is resistant to corrosion
|Blodgett CB42D-10-10K Specs|
|Height||31 1/8 Inches|
|Capacity per Compartment||10 Gallons|
|Installation Type||Floor Model|
|Made in America||Yes|
|Steam Inlet Size||3/4 Inches|
|Water Inlet Size||3/8 Inches|
Customer questions about this product
- Does this Blodgett item require a water filter for proper usage?
- Yes. The quality of water used will greatly impact the performance of your machine. Be sure to use the manufacturer-recommended water filter, as well, or you may void the warranty on your unit.
Blodgett CB42D-10-10K Details
Increase your production capabilities while saving energy and labor with this Blodgett CB42D-10-10K double 10 gallon direct steam tilting steam jacketed kettle with a cabinet base! This unit features a 42" cabinet that contains a steam supply manifold and condensate return manifold that connect directly to the kettles, allowing you to prepare large batches of your signature soups, stews, or pasta without the hassle of ranges or stock pots.
Thanks to the 2/3 jacketed design, each of the two 10 gallon kettles has 1-2 times more heat transfer surface area than a traditional stock pot. This means you'll have faster heat-up and cook times, which increases overall efficiency and production. Plus, faster cook times mean less energy used, so your utility bills will be lower.
With more even heating, there is less need for frequent stirring or "pot watching." The hemispherical bottoms ensure superior heat circulation, which helps keep the heat inside the kettles and prevents energy from being lost to the surrounding kitchen area.
The tilting mechanisms allow each kettle to tilt forward past 90 degrees so that you can empty the contents with ease. The tilt handles are reversible for user-friendly operation, and the heat proof knobs help prevent employee injuries.
The cabinet base is equipped with a hot and cold water faucet to fill the kettles, 3" deep sinks with drains, and dual splash guards. A steam supply safety valve adds extra security for your employees, and the removable side panels make the inner components easily accessible for servicing.
The #4 stainless steel finish resists corrosion and makes cleanup easy, and the 6" stainless steel legs have adjustable bullet feet in the front and adjustable flanged feet in the back for proper leveling. Plus, the flanged feet allow the unit to be safely secured to the floor.
Height (including handle): 61 1/8"
Capacity: 20 gallons
Made in America
This item was made in the United States of America.
This item meets the standards imposed by the Canadian Standards Association (CSA).
CSA Design Cert
This item has been certified by the Canadian Standards Association (CSA) and meets applicable U.S. standards.
CSA Blue Flame
This item has been certified by the Canadian Standards Association (CSA) and meets applicable Canadian standards for appliances using gas or petroleum fuel.
This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL).
This product must be hardwired; it does not plug into a standard wall outlet.
3/4" Gas Connection
This unit comes with a 3/4" gas connection.
3/8" Water Connection
This unit comes with a 3/8" water connection.
3/4" Steam Connection
This unit comes with a 3/4" steam connection.
Resources and Downloads for
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Please note there is an 8% administrative warranty fee and potential for additional export fees for units that are shipped outside of the United States RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.
Leave a review of this product!
If you've used this product, log in and leave a review to tell us and other customers what you thought about it. Get paid up to $16 for submitting one of the first text, photo, or video reviews for this item. View your account for details.Login or Register