$6,921.50/Each

This product is no longer available. We've left this page up for reference only.

Usually Ships in 8 Weeks from manufacturer

Lead times vary based on manufacturer stock

Product Overview

  • Raised topping rail with low-velocity air screen
  • Front-breathing design requires no clearance for set up
  • 17" dishwasher-safe cutting board provides ample prep space
  • Stainless steel exterior top, sides, and front
  • Accommodates up to (6) 1/3 food pans (6" deep pans included); 115V, 1/3 hp
UPC Code:400014041868
View all Delfield Commercial Pizza Preparation Refrigerators

Delfield 4448RP Specs

Quantity
1/Each
Shipping Weight
316 lb.
Width
48 1/8 Inches
Depth
31 1/2 Inches
Height
42 Inches
Cutting Board Width
48 1/8 Inches
Nominal Width
48 Inches
Cutting Board Depth
17 Inches
Work Surface Height
36 Inches
Amps
4 Amps
Hertz
60 Hertz
Phase
1 Phase
Voltage
115 Volts
1/3 Size Pan Capacity
6 Pans
Access Type
Doors
Capacity
16 cu. ft.
Compressor Style
Front Breathing
Construction
Stainless Steel and Aluminum
Door Style
Swing
Door Type
Solid
Features
Made in America  NSF Listed
Horsepower
1/3 HP
Installation Type
Freestanding
Number of Doors
2 Doors
Number of Shelves
2 Shelves
Plug Type
NEMA 5-15P
Refrigerant Type
R-290
Refrigeration Type
Air Cooled
Temperature Range
33 - 41 Degrees F

Customer questions about this product

Does free shipping apply to this Delfield item if I am shipping it to a residential address?

No. The manufacturer charges a $96 fee for truck deliveries to a residential address. Please contact our Customer Solutions team prior to placing your order if you have any questions.

I haven’t heard of R-290, R-600a, R-513a, or R-448A refrigerant before. What is it?

R-290 (also known as high purity propane or CARE 40) and R-600a (also known as refrigerant grade Isobutane or CARE 10) are hydrocarbon refrigerants. R513a (also known as Opteon XP10) and R-448A (also known as Solstice N40) are HFO (hydrofluoroolefin) refrigerants. They are being used by some manufacturers in response to the EPA’s Significant New Alternatives Policy (SNAP) Program.

What kinds of pans can I use in my refrigerated prep table?

While various configurations combining traditional 1/3 size, 1/6 size, and other food pan sizes are possible, it's important to refer to your equipment's Specification Sheet and/or Owner's Manual to see what pan sizes and configurations are recommended. Certain accessories may be needed in order to use pans of a different size than what is recommended. It is also important to note that mixing and matching pans from different manufacturers may result in the pans not fitting properly.

Ask your own question!

Delfield 4448RP Details

This Delfield 4448RP 48" two door refrigerated pizza prep table with raised rail combines everything you need to make a high-quality pizza in one convenient place! Its raised rail maintains temperatures between 33 and 41 degrees Fahrenheit, and offers storage space for up to (6) 1/3 size pans (6" deep pans included). It also incorporates a patented low-velocity air screen design to ensure that your toppings stay cold without being dried out. Dual-level pan brackets allow the pans to be lowered an additional inch into the unit without any tools required, providing additional temperature holding performance. It also features a generous work surface in front of the topping rail, and comes with a standard 17" wide, dishwasher-safe cutting board that is mounted on heavy-duty brackets.

The top, front, lids, and sides of this prep table are all made from stainless steel to stand up to the rigor of day-to-day use, and the refrigerated base has two adjustable epoxy-coated wire shelves and plenty of space to keep extra toppings close at hand. This front breathing unit can maintain temperatures between 33 and 40 degrees Fahrenheit, adjustable with the electronic, solid state control located on the exterior rear of the cabinet. For durability and easy cleaning, the interior features a rugged and easy-to-clean ABS liner that carries a limited lifetime warranty.

A 1/3 hp compressor provides cooling for the base and rail, and uses environmentally friendly R-290 refrigerant to maintain food-safe holding temperatures. High-density, foamed-in-place polyurethane insulation also contributes to outstanding temperature retention and efficiency in the most demanding environments. Four 5" casters allow for easy mobility. This refrigerated pizza preparation table requires a 115V electrical connection and comes with an 8' cord and plug.

Overall Dimensions:
 Width: 48 1/8"
Depth: 31 1/2"
Height: 42"
Work Surface Height: 36"
Capacity: 16 cu. ft.

Attention CA Residents:

Attention CA Residents

WARNING:This product can expose you to chemicals including lead, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • UL Listed, US

    UL Listed, US

    This product has been certified by the Underwriters Laboratories (UL) to meet applicable safety standards required for use in the United States.

  • UL Listed, Canada

    UL Listed, Canada

    This product has been certified by the Underwriters Laboratories (UL) to meet applicable safety standards required for use in Canada.

  • NSF Listed

    NSF Listed

    This item has been certified by NSF International to meet applicable product standards on public safety, health, and / or the environment.

  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

Resources and Downloads for
Delfield 4448RP

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Resources

  • NSF International
  • Different Types of Prep Tables
  • Pizza Shop Equipment List