$7,694.00/Each

Contact us for details

Ships free with Plus

Call 717-392-7472(Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST)

Why do we do this?

Due to a manufacturer's price increase, this price will increase by 3.00% on 01/01/25

Earn up to $230.82 back (23,082 points)with a Webstaurant Rewards Visa® Credit Card

Installation Services

Check if installation is currently available for your area.

Usually Ships in 4 Weeks from manufacturer

Lead times vary based on manufacturer stock

Product Overview

  • Stainless steel front, sides, top, grille, and drawers
  • 19" wide removable cutting board
  • Aluminum interior liner resists corrosion, and also stops spills from falling into the cabinet
  • Built to accommodate 6" deep pans (sold separately)
  • Uses eco-friendly R290 refrigerant, 115V, 1/3 hp
UPC Code:400013432544

Beverage-Air DPD60HC-2 Specs

Quantity
1/Each
Shipping Weight
454 lb.
Width
60 Inches
Depth
37 Inches
Height
33 5/8 Inches
Power Cord Length
8 Feet
Interior Width
41 Inches
Nominal Width
60 Inches
Interior Depth
26 Inches
Interior Height
23 7/8 Inches
Work Surface Height
33 5/8 Inches
Amps
4.5 Amps
Hertz
60 Hz
Phase
1 Phase
Voltage
115 Volts
Access Type
Drawers
BTU Per Hour
2,940 BTU
Capacity
17.76 cu. ft.
Color
Silver
Compressor Location
Side Mounted
Compressor Style
Side / Rear Breathing
Construction
Stainless Steel and Aluminum
Exterior Material
Stainless Steel
Features
Made in America
Horsepower
1/3 HP
Installation Type
Freestanding
Interior Material
Aluminum
Number of Drawers
2 Drawers
Plug Type
NEMA 5-15P
Refrigerant Type
R-290
Refrigeration Type
Air Cooled
Temperature Range
36 - 38 Degrees F

Customer questions about this product

Does Beverage-Air warrant this item for use in a food truck?

This item is covered under Beverage-Air's warranty contingent upon the unit being kept in a controlled climate. This means that the interior of the food truck may not be susceptible to extreme high or low temperatures. If warranty service is required, the truck must be able to sit stationary for 24-48 hours to allow for a technician to service the equipment.

I haven’t heard of R-290, R-600a, R-513a, or R-448A refrigerant before. What is it?

R-290 (also known as high purity propane or CARE 40) and R-600a (also known as refrigerant grade Isobutane or CARE 10) are hydrocarbon refrigerants. R513a (also known as Opteon XP10) and R-448A (also known as Solstice N40) are HFO (hydrofluoroolefin) refrigerants. They are being used by some manufacturers in response to the EPA’s Significant New Alternatives Policy (SNAP) Program.

What does the “H” or “HC” mean in the newer Beverage-Air model numbers?

This is a representation that the unit is using a “Hydrocarbon” refrigerant. This would include both R290 and R600a refrigerants. They are being used as an eco-friendly refrigerant by Beverage-Air in response to the EPA’s Significant New Alternatives Policy (SNAP) Program. Read more about this program in our blog post on Refrigerant Regulations.

What kinds of pans can I use in my refrigerated prep table?

While various configurations combining traditional 1/3 size, 1/6 size, and other food pan sizes are possible, it's important to refer to your equipment's Specification Sheet and/or Owner's Manual to see what pan sizes and configurations are recommended. Certain accessories may be needed in order to use pans of a different size than what is recommended. It is also important to note that mixing and matching pans from different manufacturers may result in the pans not fitting properly.
Ask your own question!

Beverage-Air DPD60HC-2 Details

The Beverage-Air DPD60HC-2 Hydrocarbon Series 60" 2 drawer pizza prep table is designed to keep your freshest toppings and ingredients close at hand at food-safe holding temperatures. Boasting a 19" deep removable polyethylene cutting board, this table maximizes prep space, making it perfect for building your signature pizzas, strombolis, or calzones. The interior liner of this pizza prep table is made of corrosion-resistant aluminum and is designed to prevent spills and messes from falling into the cabinet. The table is able to hold food pans (sold separately) up to 6" deep, and comes with removable stainless steel hoods and insulated lids.

This pizza prep table's 2 drawers are built with magnetic gaskets which act as seals, and telescoping slides which lock to keep drawers from being completely pulled out of the cabinet. The drawers are also constructed with highly durable stainless steel frames for long-lasting use. Built for heavy commercial use, this unit features a stainless steel front, sides, top, and drawers. Four heavy-duty 3" casters (2 locking) are also included for easy mobility throughout your facility.

The table's 1/3 hp compressor uses R290 refrigerant and will maintain the temperature of your pizza prep products between 36 degrees and 38 degrees Fahrenheit. This specialized refrigerant has an ozone depletion potential (ODP) of 0 and a global warming potential (GWP) of 3, making it an environmentally-responsible choice for your business. This table's electronically controlled system is built with a smart-defrost algorithm to take the hassle out of defrosting. An 8' long cord is provided, and a 115V electrical connection is required for operation.

Overall Dimensions:
Width: 60"
Depth with Cutting Board: 37"
Height: 33 5/8"
Work Surface Height: 33 5/8"
Capacity: 17.76 cu. ft.

Interior Dimensions:
Width: 41"
Depth: 26
Height: 23 7/8"

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Attention CA Residents

WARNING:This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • UL Classified EPH

    UL Classified EPH

    This product has been certified by the Underwriters Laboratories (UL) to meet applicable ANSI/NSF standards and / or other food equipment hygiene codes and requirements.

  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

  • UL Listed, US & Canada

    UL Listed, US & Canada

    This product has been certified by the Underwriters Laboratories (UL) to meet applicable safety standards required for use in the United States and Canada.

  • UL Sanitation

    UL Sanitation

    This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).

Need Parts & Accessories?

Show replacement parts and accessories for Beverage-Air DPD60HC-2 today!

Resources and Downloads for
Beverage-Air DPD60HC-2

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

Note: Beverage Air equipment purchased in 2013 or later will have a 3 year parts and labor warranty. Equipment purchased prior to 2013 will have a 1 year parts and labor warranty. RESIDENTIAL USERS: Your warranty will be voided if installed in non-commercial or residential applications.