$10,490.00/Each

Contact us for details

Ships free with Plus

Call 717-392-7472(Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST)

Why do we do this?

Due to a manufacturer's price increase, this price will increase by 3.00% on 01/01/25

Earn up to $314.70 back (31,470 points)with a Webstaurant Rewards Visa® Credit Card

Installation Services

Check if installation is currently available for your area.

Usually Ships in 4 Weeks from manufacturer

Lead times vary based on manufacturer stock

Product Overview

  • Clear, lift-up lid provides product visibility so that it's easy to monitor and refill when needed
  • Built to accommodate 6" deep pans (sold separately)
  • Stainless steel front, sides, top, grille, and drawers
  • 19" deep, reversible polyethylene cutting board provides ample workspace
  • Uses eco-friendly R290 refrigerant, 115V, 1/2 hp
UPC Code:400014095571

Beverage-Air DPD93HC-3-CL Specs

Quantity
1/Each
Shipping Weight
600 lb.
Width
93 Inches
Depth
37 Inches
Height
53 1/8 Inches
Power Cord Length
8 Feet
Interior Width
74 Inches
Nominal Width
93 Inches
Cutting Board Depth
19 Inches
Interior Depth
26 Inches
Interior Height
23 7/8 Inches
Work Surface Height
33 5/8 Inches
Amps
7.8 Amps
Hertz
60 Hertz
Phase
1 Phase
Voltage
115 Volts
Access Type
Doors and Drawers
BTU Per Hour
4,234 BTU
Capacity
31.5 cu. ft.
Color
Silver
Compressor Location
Side Mounted
Compressor Style
Side / Rear Breathing
Construction
Stainless Steel and Aluminum
Door Style
Swing
Door Type
Solid
Exterior Material
Stainless Steel
Features
Clear Lid  Made in America
Horsepower
1/2 HP
Installation Type
Freestanding
Interior Material
Aluminum
Maximum Temperature
38 Degrees F
Number of Doors
2 Doors
Number of Drawers
3 Drawers
Number of Shelves
4 Shelves
Plug Type
NEMA 5-15P
Refrigerant Type
R-290
Refrigeration Type
Air Cooled
Temperature Range
36 - 38 Degrees F

Customer questions about this product

Does Beverage-Air warrant this item for use in a food truck?

This item is covered under Beverage-Air's warranty contingent upon the unit being kept in a controlled climate. This means that the interior of the food truck may not be susceptible to extreme high or low temperatures. If warranty service is required, the truck must be able to sit stationary for 24-48 hours to allow for a technician to service the equipment.

I haven’t heard of R-290, R-600a, R-513a, or R-448A refrigerant before. What is it?

R-290 (also known as high purity propane or CARE 40) and R-600a (also known as refrigerant grade Isobutane or CARE 10) are hydrocarbon refrigerants. R513a (also known as Opteon XP10) and R-448A (also known as Solstice N40) are HFO (hydrofluoroolefin) refrigerants. They are being used by some manufacturers in response to the EPA’s Significant New Alternatives Policy (SNAP) Program.

What does the “H” or “HC” mean in the newer Beverage-Air model numbers?

This is a representation that the unit is using a “Hydrocarbon” refrigerant. This would include both R290 and R600a refrigerants. They are being used as an eco-friendly refrigerant by Beverage-Air in response to the EPA’s Significant New Alternatives Policy (SNAP) Program. Read more about this program in our blog post on Refrigerant Regulations.

What kinds of pans can I use in my refrigerated prep table?

While various configurations combining traditional 1/3 size, 1/6 size, and other food pan sizes are possible, it's important to refer to your equipment's Specification Sheet and/or Owner's Manual to see what pan sizes and configurations are recommended. Certain accessories may be needed in order to use pans of a different size than what is recommended. It is also important to note that mixing and matching pans from different manufacturers may result in the pans not fitting properly.
Ask your own question!

Beverage-Air DPD93HC-3-CL Details

Engineered for superior function and durability, the Beverage-Air DPD93HC-3-CL 93" refrigerated pizza prep table simplifies the workflow of pizza assembly. With this prep table's clear lid, it provides exceptional product visibility to show-off ingredients to customers and to help employees locate the toppings. Its rail holds 6" deep food pans, making it easy to store a wide variety of ingredients right where you need them. They're kept between 36 and 38 degrees Fahrenheit for food safety, while the lift-up lid traps the cold air around the product and help prevent cross-contamination.

This particular pizza prep table features a 19" deep cutting board in front of the raised rail to provide plenty of workspace for meal preparation. It's made of white polyethylene and is easy to remove for cleaning; it's even reversible to maximize longevity! As you grab the ingredients stored in the rail and assemble an order on the cutting board, you can also access the lower refrigerated cabinet to retrieve back-up ingredients or specialty toppings. The prep table's 3 drawers are built with magnetic gaskets which act as seals, and telescoping slides which lock to keep drawers from being completely pulled out of the cabinet. These slides are made of stainless steel and feature Delrin rollers rated at 275 lb. The drawers are also constructed with highly durable stainless steel frames for long-lasting use. A set of two self-closing doors provide storage space as well, each featuring a stay-open feature for easy loading and two shelves for organization.

To prevent the inevitable spill and leak from damaging the unit's interior, it's lined with corrosion-resistant aluminum. Plus, an aluminum top interior liner helps prevent product from the rail from falling into the cabinet. For overall durability, this prep table is built with a stainless steel front, top, grille, drawers, and sides. A set of (4) 3" casters, 2 with brakes, even come standard to make the unit easy to move aside for cleaning or service.

The unit's 1/2 hp compressor uses R290 refrigerant, which is a specialized refrigerant with an ozone depletion potential (ODP) of 0 and a global warming potential (GWP) of 3. For easy maintenance, an electronically controlled system is built with a smart-defrost algorithm to take the hassle out of defrosting. An 8' long cord is provided, and a 115V electrical connection is required for operation.

Overall Dimensions:
Width: 93"
Depth with Cutting Board: 37"
Height: 53 1/8"
Work Surface Height: 33 5/8"
Capacity: 31.5 cu. ft.

Interior Dimensions:
Width: 74"
Depth: 26
Height: 23 7/8"

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Attention CA Residents

WARNING:This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • UL Classified EPH

    UL Classified EPH

    This product has been certified by the Underwriters Laboratories (UL) to meet applicable ANSI/NSF standards and / or other food equipment hygiene codes and requirements.

  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

  • UL Listed, US & Canada

    UL Listed, US & Canada

    This product has been certified by the Underwriters Laboratories (UL) to meet applicable safety standards required for use in the United States and Canada.

  • UL Sanitation

    UL Sanitation

    This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).

Resources and Downloads for
Beverage-Air DPD93HC-3-CL

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

Note: Beverage Air equipment purchased in 2013 or later will have a 3 year parts and labor warranty. Equipment purchased prior to 2013 will have a 1 year parts and labor warranty. RESIDENTIAL USERS: Your warranty will be voided if installed in non-commercial or residential applications.

Customer Reviews

1.0

Rated 1 out of 5 stars

2 Customer Reviews

0 reviews rated this 5 out of 5 stars.

0 reviews rated this 4 out of 5 stars.

0 reviews rated this 3 out of 5 stars.

0 reviews rated this 2 out of 5 stars.

2 reviews rated this 1 out of 5 stars.

Frequently Mentioned

  • air
  • anymorei
  • baverage
  • bei
  • beverage
  • beverageair
  • bigger
  • bought
  • buy
  • buying

Customer Photos & Videos