$10,278.00/Each

Contact us for details

Ships free with Plus

Call 717-392-7472(Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST)

Why do we do this?

Earn up to $308.34 back (30,834 points)with a Webstaurant Rewards Visa® Credit Card

Installation Services

Check if installation is currently available for your area.

Enter ZIP Code >

Usually Ships in 4 Weeks from manufacturer

Lead times vary based on manufacturer stock

Product Overview

  • Stainless steel front, sides, top, grille, and drawers
  • 19" wide removable cutting board
  • Aluminum interior liner resists corrosion, and also stops spills from falling into the cabinet
  • Built to accommodate 6" deep pans (sold separately)
  • Uses eco-friendly R290 refrigerant, 115V, 1/2 hp
UPC Code:400013432995

Beverage-Air DPD93HC-4 Specs

Quantity
1/Each
Shipping Weight
600 lb.
Width
93 Inches
Depth
37 Inches
Height
49 Inches
Power Cord Length
8 Feet
Interior Width
74 Inches
Nominal Width
93 Inches
Interior Depth
26 Inches
Interior Height
23 7/8 Inches
Work Surface Height
33 5/8 Inches
Amps
7.8 Amps
Hertz
60 Hertz
Phase
1 Phase
Voltage
115 Volts
Access Type
Doors and Drawers
BTU Per Hour
4,234 BTU
Capacity
31.54 cu. ft.
Color
Silver
Compressor Location
Side Mounted
Compressor Style
Side / Rear Breathing
Construction
Stainless Steel and Aluminum
Door Style
Swing
Door Type
Solid
Exterior Material
Stainless Steel
Features
Made in America
Horsepower
1/2 HP
Installation Type
Freestanding
Interior Material
Aluminum
Number of Doors
1 Door
Number of Drawers
4 Drawers
Number of Shelves
2 Shelves
Plug Type
NEMA 5-15P
Refrigerant Type
R-290
Refrigeration Type
Air Cooled
Temperature Range
36 - 38 Degrees F

Customer questions about this product

Does Beverage-Air warrant this item for use in a food truck?

This item is covered under Beverage-Air's warranty contingent upon the unit being kept in a controlled climate. This means that the interior of the food truck may not be susceptible to extreme high or low temperatures. If warranty service is required, the truck must be able to sit stationary for 24-48 hours to allow for a technician to service the equipment.

I haven’t heard of R-290, R-600a, R-513a, or R-448A refrigerant before. What is it?

R-290 (also known as high purity propane or CARE 40) and R-600a (also known as refrigerant grade Isobutane or CARE 10) are hydrocarbon refrigerants. R513a (also known as Opteon XP10) and R-448A (also known as Solstice N40) are HFO (hydrofluoroolefin) refrigerants. They are being used by some manufacturers in response to the EPA’s Significant New Alternatives Policy (SNAP) Program.

What does the “H” or “HC” mean in the newer Beverage-Air model numbers?

This is a representation that the unit is using a “Hydrocarbon” refrigerant. This would include both R290 and R600a refrigerants. They are being used as an eco-friendly refrigerant by Beverage-Air in response to the EPA’s Significant New Alternatives Policy (SNAP) Program. Read more about this program in our blog post on Refrigerant Regulations.

What kinds of pans can I use in my refrigerated prep table?

While various configurations combining traditional 1/3 size, 1/6 size, and other food pan sizes are possible, it's important to refer to your equipment's Specification Sheet and/or Owner's Manual to see what pan sizes and configurations are recommended. Certain accessories may be needed in order to use pans of a different size than what is recommended. It is also important to note that mixing and matching pans from different manufacturers may result in the pans not fitting properly.

Ask your own question!

Beverage-Air DPD93HC-4 Details

The Beverage-Air DPD93HC-4 Hydrocarbon Series 93" 4 drawer pizza prep table is designed to keep your freshest toppings and ingredients close at hand at food-safe holding temperatures. Boasting a 19" deep removable polyethylene cutting board, this table maximizes prep space, making it perfect for building your signature pizzas, strombolis, or calzones. The interior liner of this pizza prep table is made of corrosion-resistant aluminum and is designed to prevent spills and messes from falling into the cabinet. The table is able to hold food pans (sold separately) up to 6" deep, and comes with removable stainless steel hoods and insulated lids.

This pizza prep table's 4 drawers are built with magnetic gaskets which act as seals, and telescoping slides which lock to keep drawers from being completely pulled out of the cabinet. The drawers are also constructed with highly durable stainless steel frames for long-lasting use. This unit also includes one self-closing door. The door boasts a 120 degree stay-open design and two epoxy-coated steel wire shelves, providing extra storage and easy access to materials or ingredients. Built for heavy commercial use, this unit features a stainless steel front, sides, top, and drawers. Its interior liner is made of aluminum for exceptional corrosion resistance and protection against rust. Four heavy-duty 3" casters (2 locking) are also included for easy mobility throughout your facility.

The table's 1/2 hp compressor uses R290 refrigerant and will maintain the temperature of your pizza prep products between 36 degrees and 38 degrees Fahrenheit. This specialized refrigerant has an ozone depletion potential (ODP) of 0 and a global warming potential (GWP) of 3, making it an environmentally-responsible choice for your business. This table's electronically controlled system is built with a smart-defrost algorithm to take the hassle out of defrosting. An 8' long cord is provided, and a 115V electrical connection is required for operation.

Overall Dimensions:
Width: 93"
Depth with Cutting Board: 37"
Height: 49"
Work Surface Height: 33 5/8"
Capacity: 31.54 cu. ft.

Interior Dimensions:
Width: 74"
Depth: 26
Height: 23 7/8"

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

  • Made in America

    Made in America

    This item was made in the United States of America.

  • UL Classified EPH

    UL Classified EPH

    This product has been certified by the Underwriters Laboratories (UL) to meet applicable ANSI/NSF standards and / or other food equipment hygiene codes and requirements.

  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

  • UL Listed, US & Canada

    UL Listed, US & Canada

    This product has been certified by the Underwriters Laboratories (UL) to meet applicable safety standards required for use in the United States and Canada.

  • UL Sanitation

    UL Sanitation

    This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).

Resources and Downloads for
Beverage-Air DPD93HC-4

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

Note: Beverage Air equipment purchased in 2013 or later will have a 3 year parts and labor warranty. Equipment purchased prior to 2013 will have a 1 year parts and labor warranty. RESIDENTIAL USERS: Your warranty will be voided if installed in non-commercial or residential applications.

Customer Reviews

Overall User Rating

1.0 stars from 1 review

Rated 1 out of 5 stars

0 reviews rated this 5 out of 5 stars.

0 reviews rated this 4 out of 5 stars.

0 reviews rated this 3 out of 5 stars.

0 reviews rated this 2 out of 5 stars.

1 reviews rated this 1 out of 5 stars.

Frequently Mentioned

  • beverageair
  • bigger
  • buying
  • fan
  • filled
  • month
  • motors
  • nothing
  • pan
  • water

Beverage-Air Customer Review from