$2,998.05/Each

  • Keeps cold foods at safe serving temperatures
  • Slim, end-to-end design for enhanced accessibility
  • Refrigerated for optimal temperature retention of cold products
  • Accommodates 2 full size food pans
  • Auto-defrost function with 1" drain for easy cleaning
  • Adjustable condensing unit for flexibility at installation
  • Drop-in design can be installed into existing counters
  • 120V, 1/4 hp; R-404A refrigerant

Condition:

New
Shipping:

Usually Ships in 1-2 Weeks

White Glove Delivery - Available -

What is White Glove service?

Standard common carrier delivery options cover the cost of getting an item to your shipping address but our White Glove delivery service does that and more!

The White Glove agent will call to schedule a Call Before Delivery within a four hour window, which gives you the flexibility to work around your busy schedule and to prepare the space where your item will be placed. Upon delivery, trained professionals will unload your large item from the truck, bring it into the room of choice, unpack the item and remove all packaging debris from the premises.

Please note that White Glove delivery will typically add 5 - 7 business days to your order's transit, and only includes 30 minutes of on-site time. If on-site time beyond 30 minutes is required, you may be responsible for additional fees. While the agents will bring the items into the location of your choice, this service does not include set-up of the items being delivered, such as installation of casters, shelves, or other accessories. Small items will not be unpackaged individually; they will be set in place and debris and packaging material will not be removed.

You May Also Need

"You May Also Need" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.

Custom Heat Lamps
How To Operate A Hatco Hot and Cold Drop In Well

How To Operate A Hatco Hot and Cold Drop In Well

The Hatco drop-in hot/cold well is easy to operate. Let us show you how! To operate in the hot mode, you must first install the water baffle with the probe designation mark and match it to the location on the water level probe in the unit. Then, install the pan platforms that support your food pans. The number of pan platforms is determined by the size of the well. The yellow drain level must be in the closed, or forward, position to operate in the hot mode. The drain position indicator light will confirm the drain is closed. Move the power switch to the right, or hot, position. The hot digital temperature controller will activate, and the current temperature of the unit will appear on the display. The auto-fill system will fill the well, and the water level probe will maintain the correct water level automatically. The active symbol will show that the hydro-heater is heating the well. The unit is preset to 192 degrees Fahrenheit, 89 degrees Celsius. Allow approximately 60 minutes for the unit to reach set point temperature. Check the hot digital temperature controller to see that the unit has reached the proper temperature. Then, load the well with pans containing your preheated food items. There are several important points that apply to both hot and cold operation. Always use a food pan. Do not place food directly into the well. Stir thick food items periodically for uniform heating or cooling. Amazing! The food choices looked so good, it vanished. We have to get ready for an express salad bar anyway in this same location. To shut down the hot mode, move the power switch to the center or off position. The hydro-heater and auto-fill will be deactivated. After every use, be sure the unit is fully drained and all food pans, water baffle, and pan platforms are removed, cleaned, and stored after each use. Follow both the daily cleaning and periodically the “Cleaning the Hydro-Heater” instructions in the installation and operating manual. For cold mode, the well should be cooled down, clean, dry, and empty of water baffle and pan platforms. We suggest approximately 60 minutes or more to transition between modes in this unit. Keep in mind, the cold mode only operates if the yellow drain level is in the open, or back, position. Install the drain pan support bars. Each well can hold a variety of combinations. Shown are two full size and three one third size food pans. During the initial cooling time, the well will chill quicker with empty food pans installed in the well. Move the power switch to the left, or cold, position. Current temperature will appear in the cold digital temperature controller. A 5 minute program delay acts as a safe guard when switching from hot to cold mode. This ensures that all possible hot water is drained and prevents unnecessary cooling. After 5 minutes, an active symbol will appear to show that the condensing unit is chilling the well. The unit is preset to a cold temperature of 32 degrees Fahrenheit, 0 degrees Celsius. Allow approximately 60 minutes for the unit to reach set point temperature. Once the digital controller shows the proper set point temperature, replace the empty pans with pans loaded with your pre-chilled food. MMM, tasty salad bar items at optimum serving temperatures. Incredible how quickly these items disappear. To shut down the cold mode, move the power switch to the center, or off, position. The cold digital controller and condensing unit will shut off. Follow both daily cleaning and periodically the “Cleaning the Condensing Unit” instructions in the installation and operating manual. Check the temperatures for food safeness on the Hatco website before changing the set points. The range for cold digital temperature controller is 10-50 degrees Fahrenheith, -12-10 degrees Celsius. The temperature range for the hot controller is 65-192 degrees Fahrenheit, 18-89 degrees Celsius. To change the set point, press and hold the set key until the display flashes the default of 32 degrees. We will show changing the cold mode here. To change the hot mode set point, follow the same procedure. Press the up or down key to increase or decrease the temperature. If no key is set within 60 seconds, the display will revert to the previous set point and current temperature will be shown. Set point changes should be made in 1-2 degree increments. Wait approximately 1 hour or more for any change before checking for the result. Press the key to lock in the new set point temperature. The display will show the current temperature of the unit. The installation and operating manual goes into more detail about installing, operating, cleaning, and other panel functions of Hatco’s hot/cold drop-in well. Check out the new video “How do you clean the Hatco FR2 rethermalizer/bain marie heater and 3CS2 sanitizing sink heater” on the Hatco website under “Video Library” for easy cleaning tips. If you have any questions or your unit requires service, contact your local Hatco dealer, sales representative, Hatco customer service, or visit www.hatcocorp.com For more information, our knock-your-socks-off customer service is here for you.

Copy and paste the embed code above.

Hatco's hot and cold drop-in well allows you to hold both hot and cold food items at safe temperatures in a single unit! This video describes how to change your unit from hot to cold as well as how to clean it.

Hatco Equipment

Hatco Equipment

Hatco. Providing the foodservice industry with innovative solutions since 1950. Built-ins. Carving stations. Decorative lamps. Display lights. Drawer warmers. Frost tops. Fry stations. Holding Cabinets. Induction. Light cooking equipment. Merchandisers. Portables. Strip heaters. Toasters. Water specialty. Wells. Hatco. Proud to be 100% employee owned.

Copy and paste the embed code above.

Watch this video to learn about the various types of equipment that Hatco has to offer the foodservice industry! From carving stations to holding cabinets to frost tops, this video covers it all.

Hatco CWB-S2 Specs
Width 48 1/8 Inches
Depth 18 7/8 Inches
Height 25 1/16 Inches
Cutout Width 46 1/4 - 47 1/16 Inches
Cutout Depth 17 1/16 - 17 7/8 Inches
Amps 6.7 Amps
Hertz 60 Hertz
Phase 1
Voltage 120 Volts
Wattage 804 Watts
Compressor Location Built-In
Horsepower 1/4 HP
Installation Type Drop In
Made in America Yes
Material Aluminum / Stainless Steel
NSF Listed Yes
Number of Pans 2
Power Type Electric
Style Slim Line
Temperature Range 32 - 41 Degrees F
Temperature Settings Adjustable

Hatco CWB-S2 Details

Keep your most popular cold dishes chilled to the perfect serving temperature with the Hatco CWB-S2 two pan refrigerated slim drop-in cold food well! Thanks to the slim design, this unit accommodates full size food pans end-to-end rather than side-by-side, adding a few extra inches of precious space between buffet lines. This ensures that customers will have an easier time accessing your salad or cold condiment bar, even with sneeze guards present. Plus, the slim design still looks uniform with the rest of your Hatco drop-in food wells for a consistent look across any serving line.

This food well fits two full size food pans and features a 1/4 hp condensing unit that circulates R-404A refrigerant, so you can be sure your food stays safely cold throughout the day. The full-body insulation improves energy efficiency while retaining temperature, and you can easily maintain and fine-tune this unit with its sight glass, service valves, dryer, filter, and receiver. And, with a drop-in design, this unit can easily be installed into existing countertops, buffet lines, and other surfaces.

To prevent frost buildup, a programmable automatic defrost can be adjusted to your needs through the electronic controls. The condensing unit is field adjustable so you can fit the unit perfectly in your countertop, and thanks to the built-in 1" drain, clean-up takes a matter of moments. This unit requires a 120V electrical connection.

Overall Dimensions:
Width: 48 1/8"
Depth: 18 7/8"
Height: 25 1/16"

Cutout Dimensions:
Width: 46 1/4" to 47 1/16"
Depth: 17 1/16" to 17 7/8"

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • NSF Listed

    NSF Listed

    This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

  • UL US & Canada

    UL US & Canada

    This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL) for use in the United States of America and Canada.

  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

Resources and Downloads for Hatco CWB-S2

Warranty Info

NOTICE: This product does not ship internationally. RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register