• Free Shipping!  


Contact us for pricing

Why do we do this?

Call 717-392-7472 (Mon-Thur 24 Hours, Fri 12AM-8PM EST
Sat & Sun: 9AM-4PM EST)

  • (2) 12 liter hoppers with twin twist flavor option
  • Mix low indicator alerts operator to add mix
  • Equipped with microprocessor controls
  • Standard hopper agitator ensures product quality and consistency
  • Standby feature maintains product temperature when machine is not in use
  • Outputs 55 quarts / hour
  • Uses R404A refrigerant
  • (2) 1.25 hp motors

Quality Rating:

UPC Code:




Usually Ships in 6-8 Weeks

White Glove Delivery - Available -

What is White Glove service?

Standard common carrier delivery options cover the cost of getting an item to your shipping address but our White Glove delivery service does that and more!

The White Glove agent will call to schedule a delivery appointment within a four hour window, which gives you the flexibility to work around your busy schedule and to prepare the space where your item will be placed. Upon delivery, trained professionals will unload your item from the truck, bring it into the room of choice, unpack the item and remove all packaging debris from the premises.

Please note that White Glove delivery will typically add 5 - 7 business days to your order's transit, and only includes 30 minutes of on-site time. If on-site time beyond 30 minutes is required, you may be responsible for additional fees. Additionally, this service does not include set-up of the items being delivered.

You May Also Need

"You May Also Need" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.

Spaceman: Assembling the Air Pump

Spaceman: Assembling the Air Pump

I’m Kevin with Spaceman and today we’re going to assemble an air pump. We’re taking this from the point after you would have sanitized. And when you have the sanitizer in here and you’re running it on “wash” for five minutes, you would have these pieces in the sanitizer to sanitize and this table would also need to be sanitized to hold the pieces as we assemble it.

So we have a theme with, you know, throughout the air pump where we have these twist locks. We have a pin here. On the housing, we have a lock. Lubricate the shaft. Push this all the way back, it’s a little bit hard to push back, some of them can be very tough, and then twist it and it will lock into place. You can’t pull it forward. We have two gears, one of them goes on the drive shaft, the other one is kind of to the side of it. Both of these gears need to be wet while they’re assembled. I’m not going to wet them, I’m going to show you what happens if they don’t. Then we’re going to kind of fix it because we get some calls with that sort of problem. There we go, get it all lined up. Gasket, little bit of lubrication is ok on this piece, doesn’t need a lot, it’s not a moving piece. And then we’re going to move to the front.

The front, we need to assemble this a little bit so, let’s come down here. This guy gets an “O” ring. This is the piece that sucks our product up from the hopper. Make sure that you lubricate this “O” ring well. And then the spring, the spring won’t sit in here very well so just kind of hold that with your thumb. And this all goes into here. Now, again, we have a pin and a little cut out. Can you see that? And that’s going to go on the pin and then we’re going to twist it to lock it. So, on. Match them up, all the way on, twist the lock. Now when we’re on there, counterclockwise, you’re going to get more air in your product. It is going to be fluffier, lighter, will stand up taller. The other way is thicker, richer, the opposite. This is going to go on. Hand screws, both of these are the same. Don’t go fully on tight with one, just go until it stops. There we go and then we put this one on here. We don’t want to go too much with one then the other because we can get this at an angle and then it won’t be air tight and it just won’t work. A little back and forth, there we go!

Now assembling two, out of, let’s see, out of these two black “O” rings, we have a little bit larger one right here, little bit of lubrication. Out of these guys, there’s a little bit taller one. This one gets the check valve. The check valve is basically a one-way valve when the product in the air comes out of the air pump, down into the cylinder; this is going to stop it from going back, so it is always under pressure. If you’re losing pressure, this check valve has gone bad and needs to be replaced. Not a lot of people know this, but there’s a little “O” ring that goes on there. Make sure you take this off and clean underneath there, it can get very dirty. It will snap into place. Then, one more “O” ring on there, little bit of lubrication here, and they screw together. This is the shorter piece. Now these two “O” rings, you can barely tell the difference. This one is a little bit larger. It is actually the same “O” ring that goes there. It goes on the outside. The littler one, and this one is tricky to get in. Push it in the top and put the, get a little piece of it in there. Pick and very gently, alright made it look easy! It just pops into place. Little bit of lubrication, little bit of lubrication.

Another one of these twist blocks, this time this cutoff is going to match up with this pan and then we’re going to twist it. So I’ll show you that. Put it on; now push this piece back onto there. Now this can be a little tricky getting these on, there is a left and a right tube. The air pump, this whole assembly stays the same. Put it on and just wiggle it in. Down and out, now pull this tube back and push this piece forward. There, twist to lock. Now this piece can’t come out, can’t come up, can’t go out. This is good because there’s going to be pressure here. You want to make sure that you get those tight. Now, you guys will have sanitizer still in here and you’ll need to prime the machine. So that’s how it goes together.

To get the sanitizer out, you prime the machine and set this here. We’re going to mimic sanitizer, this is just water and it’s not the full sanitizing procedure, that’s in another video that we have. Just throw a little bit in there. Ok and where we leave you with the sanitizing video is that you pull it all out on “wash”. So we’ll do that really quick. And now we’re at this point where there’s still a little bit of sanitizer in the hopper, there’s still a little bit of sanitizer in here, and we want to flush it out. Take some product, pour it in nice and slow, not too much, and hold the handle down. Let’s see what we get. Just wait now. It’ll start to come out, there we go. So we’re getting a little bit of water out of the front, it is going to turn into product as the product pushes all the water out. There we go, we’re starting to turn into product. We’ll let it go a little bit longer. It’s worth it to get the sanitizer out. Little bit more product in, good we’re going to get thick product out there. So lift the handle up, lift the prime plug up, pour in the rest of our product. It’s going to start to come out the prime plug. Just wait to make sure you’re not on “wash” for this. There you go, you heard it start there. Starting to come out thick, push that down.

Now before we install this tube, we want to make sure that this is also primed, which it’s not right now. And if it is, product will come squirting out here when I put it on “wash”. Nothing. Take a cup, scoop up some product, pour the product down the hole. Again, this isn’t as ideal as if we assemble it with just the sanitizer still on there and still a little bit wet, but if you’re in a pinch… and let’s just hope that this works my first time. I’ve got a lot of product that I’m using right now and I’m just holding it up there and just praying that it will get into the gears and start it. Let’s see what we get. Oh hey, that’s how you do it! Now again, we’re on more product. So if we move this, you can hear that extra air and more product. Press “stop”. Find the bottom. Again, we want to drop it down to get it in place, wiggle it in, pull and push, lock it, nice solid connection. Now, at this point the cylinder is under pressure. If I was to just go and remove this, it would spray yogurt all over the ceiling and if I go and pull this handle it’s going to release the pressure out onto the bucket. Let’s pressurize it a little bit. See if we can get a nice, good example of what happens here. And keep in mind, if it’s frozen, it won’t do this. But if it’s liquid, it is going to come flying out. So you don’t want to do that all over a cup, always make sure that you release the pressure anytime that you’re checking, unless you know that the product is frozen. And that’s the assembly of an air pump, that’s how they work.

Copy and paste the embed code above.

Check out this video to learn how to properly assemble the air pump for Spaceman soft serve machines!

Spaceman Beater Technology

Spaceman Beater Technology

With Spaceman beater technology, your machine's blades scrape its cylinder walls, producing a more efficient product flow and ensuring every last drop is used.

Copy and paste the embed code above.

Learn how Spaceman's beater technology can increase efficiency in your restaurant or ice cream parlor!

Width 21 13/16 Inches
Depth 31 3/16 Inches
Height 37 5/8 Inches
Amps 26 Amps
Hertz 60
Phase 1
Voltage 208/230
Application Medium Volume
Capacity 24 Liters
Capacity per Compartment 12 Liters
Features Flavor Twist

Hopper Agitator
Horsepower 1 1/4 HP
Installation Type Countertop
Number of Hoppers 2
Output 55 Quarts Per Hour
Style Continuous Production


This Spaceman 6245H soft serve ice cream freezer is ideal for freezing and serving ice cream, custard, frozen yogurt, gelato, and sorbet. The machine is equipped with (2) 1.7 liter freezing cylinders as well as (2) 12 liter mix hoppers. This machine can dispense two different flavors with the option to twin twist and have customers enjoys both flavors at once. With the ability to output 55 quarts an hour and a built-in counter to see number of dispenses per day, as well as total dispenses, the machine is built to cater to busy establishments.

Ease of use is another integral aspect to this soft serve freezer. It is equipped with a mix low indicator, which alerts the operator when the mix is running low and gives you time to remedy the issue. The microprocessor controls add a level of convenience by automatically regulating refrigeration and helping ensure consistent product quality by controlling the product's temperature and viscosity levels. Similarly, the built-in standby feature maintains product temperature in the mix hoppers and freezing cylinders below 40 degrees Fahrenheit during long no-use periods, and the hopper agitator ensures consistent product quality and dispensing. These features are designed to give you the highest quality product without added stress.

Unlike other soft serve freezers which only offer basic safety protections, the unit has safety considerations built into each feature of its machine. The built-in temperature display shows both the hopper and cylinder temperature to control product safety. The freezer is also equipped with low temperature and motor overload cutouts to protect from cylinder over freezing. Its high pressure switch prevents compressor overheat, while thermal overload protects the freezer from motor overheat.

-(2) 1.7 liter freezing cylinders

-(2) 12 liter mix hoppers

-(2) 1.25 hp motors

-(2) 4400 BTU/HR main compressors that use R-404A refrigerant

-480 BTU/HR separate hopper cooling compressor that uses R-134a refrigerant

-Air cooled

Overall Dimensions:
Width: 21 13/16"
Depth: 31 3/16"
Height: 37 5/8"

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

  • ETL Sanitation

    ETL Sanitation

    This item meets the sanitation standards imposed by the ETL, a division of the Intertek Group.

  • ETL US & Canada

    ETL US & Canada

    This item meets the electrical product safety standards imposed by the ETL, a division of the Intertek Group, for use in the United States and Canada.

  • Hardwired


    This product must be hardwired; it does not plug into a standard wall outlet.

6245 Spec Sheet Specsheet Spaceman Warranty Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

INTERNATIONAL USERS:For users outside the United States, Spaceman offers a one year part warranty. Any labor costs incurred by an onsite technician are not covered. Condensers must be cleaned annually (at a minimum) and documented by buyer in order to maintain the compressor warranty. RESIDENTIAL USERS: Spaceman assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register