$4,284.00/Each
This product is no longer available. We've left this page up for reference only.
- Holds up to 32 cases of 12 oz. bottles or 45 3/4 cases of 12 oz. cans
- High RPM fans provide greater cooling
- Wear-resistant, easy-to-clean stainless steel finish with galvanized steel interior
- Temperature range: 30 to 32 degrees Fahrenheit
- Integrated bottle cap opener and catcher
- 1/2 hp compressor uses R-134a refrigerant
- Tested to perform in ambient temperatures of 100 degrees Fahrenheit
Beverage-Air DW79-S-29 Specs | |
---|---|
Quantity | 1/Each |
Width | 80 Inches |
Depth | 26 1/2 Inches |
Height | 33 7/8 Inches |
Interior Width | 76 Inches |
Interior Depth | 22 1/2 Inches |
Interior Height | 27 Inches |
Amps | 9.5 Amps |
Hertz | 60 Hertz |
Phase | 1 Phase |
Voltage | 115 Volts |
Access Type | Doors |
Capacity | 24.1 cu. ft. |
Compressor Location | Side Mounted |
Compressor Style | Side / Rear Breathing |
Exterior Finish | Stainless Steel |
Horsepower | 1/2 HP |
Lid Style | Sliding |
Lid Type | Solid |
Made in America | Yes |
NSF Listed | Yes |
Number of 12 oz. Bottles | 32 Cases |
Number of 12 oz. Cans | 45 3/4 Cases |
Number of Dividers | 5 |
Number of Lids | 3 Lids |
Plug Type | NEMA 5-15P |
Refrigerant Type | R-290 |
Temperature Range | 30 - 32 Degrees F |
Customer questions about this product
- Does Beverage-Air warrant this item for use in a food truck?
- This item is covered under Beverage-Air's warranty contingent upon the unit being kept in a controlled climate. This means that the interior of the food truck may not be susceptible to extreme high or low temperatures. If warranty service is required, the truck must be able to sit stationary for 24-48 hours to allow for a technician to service the equipment.
- What does the “H” or “HC” mean in the newer Beverage-Air model numbers?
- This is a representation that the unit is using a “Hydrocarbon” refrigerant. This would include both R290 and R600a refrigerants. They are being used as an eco-friendly refrigerant by Beverage-Air in response to the EPA’s Significant New Alternatives Policy (SNAP) Program. Read more about this program in our blog post on Refrigerant Regulations.
Beverage-Air DW79-S-29 Details
Serve some of the coldest and best-tasting beer in town with the Beverage-Air DW-79-S-29 80" stainless steel Frosty Brew deep well bottle cooler. Thanks to a pair of quick access "easy-glide" stainless steel lids with a matching, durable exterior, this versatile unit promises fast and dependable service for your busy bar, pub, or restaurant. This horizontal cooler can hold up to 32 cases of 12 oz. bottles or 45 3/4 cases of 12 oz. cans with exceptional ease. Five adjustable dividers are included for practical arrangement of your most popular drink choices.
Integrated high RPM cooling fans, along with a balanced, lift-out system that uses a 1/2 hp compressor and R-134a refrigerant, help keep the interior temperature between 30 and 32 degrees Fahrenheit to ensure the items stored inside are kept at an ice cold temperature. Additionally, the entire cabinet is fitted with foamed-in-place CFC and HCFC-free polyurethane insulation to increase both the unit's structural strength and overall energy efficiency. Other features include a built-in bottle opener / cap catcher and an oversized self-defrosting evaporator.
Guaranteed to revolutionize your bottle service and storage capabilities, the Beverage-Air DW-79-S-29 80" Frosty Brew bottle cooler is perfect for your bar or pub. The unit requires a 115V electrical connection.
Overall Dimensions:
Width: 80"
Depth: 26 1/2"
Height: 33 7/8"
Interior Dimensions:
Width: 76"
Depth: 22 1/2"
Height: 27"
Capacity: 24.1 cu. ft.
5-15P
This unit comes with a NEMA 5-15P plug.
Made in America
This item was made in the United States of America.
NSF Listed
This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.
UL Classified EPH
This product complies with UL EPH standards and meets ANSI/NSF requirements.
UL Listed
This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL).
UL Sanitation
This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).
UL US & Canada
This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL) for use in the United States of America and Canada.
Resources and Downloads for
Beverage-Air DW79-S-29
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Warranty Info
Note: Beverage Air equipment purchased in 2013 or later will have a 3 year parts and labor warranty. Equipment purchased prior to 2013 will have a 1 year parts and labor warranty. RESIDENTIAL USERS: Your warranty will be voided if installed in non-commercial or residential applications.
Leave a review of this product!
If you've used this product, log in and leave a review to tell us and other customers what you thought about it. Get paid up to $16 for submitting one of the first text, photo, or video reviews for this item. View your account for details.
Login or Register