Other Available Finishes:
Installation ServicesCheck if installation is currently available for your area. Enter ZIP Code >
- Holds (2) 1/2 size kegs
- Two all-stainless steel taps and antimicrobial tubing allow for use with wine, beer, and coffee
- Durable, steel construction with a stainless steel front
- Insulated with CFC- and HCFC-free, foamed-in-place polyurethane
- Uses R290 refrigerant to maintain a temperature range of 36 to 38 degrees Fahrenheit
$142.49/EachOut Of Stock
$444.99/EachOut Of Stock
- Shipping Weight
- 314 lb.
- 50 1/2 Inches
- 28 3/16 Inches
- 37 1/4 Inches
- Interior Width
- 46 1/2 Inches
- Interior Depth
- 23 Inches
- Nominal Depth
- Interior Height
- 32 Inches
- Tap Tower Height
- 3 Inches
- Tap Tower Diameter
- 3 Inches
- 7.4 Amps
- 60 Hertz
- 1 Phase
- 115 Volts
- 19.8 cu. ft.
- Compressor Location
- Left Side Mounted
- Door Type
- Exterior Finish
- Stainless Steel
- Coffee Model
Made in America
- 1/3 HP
- Number of Doors
- 2 Doors
- Number of Kegs
- 2 Kegs
- Number of Taps
- 2 Taps
- Plug Type
- NEMA 5-15P
- Refrigerant Type
- 1/2 Barrel
- Temperature Range
- 36 - 38 Degrees F
- Kegerators / Beer Dispensers
Customer questions about this product
Does Beverage-Air warrant this item for use in a food truck?
This item is covered under Beverage-Air's warranty contingent upon the unit being kept in a controlled climate. This means that the interior of the food truck may not be susceptible to extreme high or low temperatures. If warranty service is required, the truck must be able to sit stationary for 24-48 hours to allow for a technician to service the equipment.
Do I need to purchase any additional items along with this beer dispenser?
Yes, couplers, regulators, CO2 tanks, and gas hoses are all sold separately.
What size CO2 tank do I need for this beer dispenser?
The size of the CO2 tank you choose will be determined by the size of your beer dispenser unit and how often you are willing to refill the tank. Larger tanks will last longer than smaller tanks, but frequency and usage should also be taken into consideration. If you plan to store your CO2 tank inside the beer dispenser, then size will be a factor here since you will also need enough room to properly store your kegs. Your local beer supplier will be able to offer suggestions and show you the maximum tank size for your dispenser.
Can I order this beer dispenser with a customized number of taps?
Yes, Beverage Air offers a variety of customization options that you can choose from to best suit your needs. Please contact Customer Solutions with any questions you may have.
What does the “H” or “HC” mean in the newer Beverage-Air model numbers?
This is a representation that the unit is using a “Hydrocarbon” refrigerant. This would include both R290 and R600a refrigerants. They are being used as an eco-friendly refrigerant by Beverage-Air in response to the EPA’s Significant New Alternatives Policy (SNAP) Program. Read more about this program in our blog post on Refrigerant Regulations.
I haven’t heard of R-290, R-600a, R-513a, or R-448A refrigerant before. What is it?
R-290 (also known as high purity propane or CARE 40) and R-600a (also known as refrigerant grade Isobutane or CARE 10) are hydrocarbon refrigerants. R513a (also known as Opteon XP10) and R-448A (also known as Solstice N40) are HFO (hydrofluoroolefin) refrigerants. They are being used by some manufacturers in response to the EPA’s Significant New Alternatives Policy (SNAP) Program.
Beverage-Air DD50HC-1-S Details
Thanks to its heavy-duty forced air refrigeration system and 3" diameter tap with cold air intake, this Beverage-Air DD50HC-1-S double tap kegerator beer dispenser helps you serve the coldest beer in town. Featuring (1) 3" insulated tower with 2 faucets, this kegerator makes it easy to serve your patrons cold, refreshing, perfectly drafted beer. An all-stainless steel tower design and antimicrobial tubing allow you to use this dispenser serve beer, wine, or coffee without the need to retrofit later! This kegerator can hold (2) 1/2 size kegs. Boasting a durable, steel construction with a stainless steel front, this kegerator withstands the daily demands of your busy bar, pub, or catered event. The top is made of heavy-duty stainless steel for easy cleaning and maintenance. Plus, the drip tray helps contain liquid for a clean, mess-free operation.
Self-closing doors with magnetic gaskets ensure the doors seal tightly each and every time to keep kegs at the proper temperature. This unit also comes equipped with standard door locks to keep your inventory secure after hours and between keg replacements.
This beer dispenser's 1/3 hp compressor uses R290 refrigerant to maintain a temperature range of 33 to 38 degrees Fahrenheit. It is insulated with CFC- and HCFC-free foamed-in-place polyurethane that both increases its energy efficiency and structural strength. This unit requires a 115V electrical connection. The manifold/distributor and beer lines are included.
This unit runs on eco-friendly R290 refrigerant. This specialized refrigerant has an ozone depletion (ODP) of 0 and a global warming potential (GWP) of 3, making it an environmentally-responsible choice for your business.
Width: 50 1/2"
Depth: 28 3/16"
Height: 37 1/4"
Capacity: 19.8 cu. ft.
Width: 46 1/2"
Tap Tower Dimensions:
Column Diameter: 3"
This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.
Made in America
This item was made in the United States of America.
UL Classified EPH
This product complies with UL EPH standards and meets ANSI/NSF requirements.
This unit comes with a NEMA 5-15P plug.
UL US & Canada
This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL) for use in the United States of America and Canada.
Resources and Downloads for
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Note: Beverage Air equipment purchased in 2013 or later will have a 3 year parts and labor warranty. Equipment purchased prior to 2013 will have a 1 year parts and labor warranty. RESIDENTIAL USERS: Your warranty will be voided if installed in non-commercial or residential applications.
Other Products from this Line
- Beverage-Air DD58HC-1-S 1 Single and 1 Double Tap Kegerator Beer Dispenser - Stainless Steel Front, (3) 1/2 Keg Capacity
- Beverage-Air DD68HC-1-S 1 Single and 1 Double Tap Kegerator Beer Dispenser - Stainless Steel Front, (3) 1/2 Keg Capacity
- Beverage-Air DD78HC-1-S (2) Double Tap Kegerator Beer Dispenser - Stainless Steel, (4) 1/2 Keg Capacity
- Beverage-Air DD94HC-1-S (2) Double Tap Kegerator Beer Dispenser - Stainless Steel Front, (5) 1/2 Keg Capacity
2 reviews rated this 5 out of 5 stars.
1 reviews rated this 4 out of 5 stars.
0 reviews rated this 3 out of 5 stars.
0 reviews rated this 2 out of 5 stars.
0 reviews rated this 1 out of 5 stars.
Leave a review of this product!
If you've used this product, log in and leave a review to tell us and other customers what you thought about it.Login or Register