$4,029.00/Each
Ships free with PlusOther Available Colors:
Product Overview
- Holds (4) 1/2 size kegs
- Includes 2 stainless steel insulated taps
- Black powder-coated steel exterior and stainless steel interior floor
- LED interior lighting
- Uses R-290 refrigerant; 115V, 1/4 hp
Works With"Works With" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.
- Quantity
- 1/Each
- Shipping Weight
- 495 lb.
- Width
- 90 3/8 Inches
- Depth
- 28 1/8 Inches
- Height
- 37 Inches
- Power Cord Length
- 7 Feet
- Nominal Depth
- Standard
- Tap Tower Diameter
- 3 Inches
- Amps
- 2.8 Amps
- Hertz
- 60 Hertz
- Phase
- 1 Phase
- Voltage
- 115 Volts
- Capacity
- 32.8 cu. ft.
- Compressor Location
- Left Side Mounted
- Door Style
- Swing
- Door Type
- Solid
- Exterior Finish
- Black
- Features
- LED Lighting Made in America
- Horsepower
- 1/4 HP
- Number of Doors
- 3 Doors
- Number of Kegs
- 4 Kegs
- Number of Taps
- 2 Taps
- Plug Type
- NEMA 5-15P
- Refrigerant Type
- R-290
- Style
- 1/2 Barrel
- Temperature Range
- 33 - 38 Degrees F
- Type
- Kegerators / Beer Dispensers
Customer questions about this product
Do I need to purchase any additional items along with this beer dispenser?
Yes, couplers, regulators, CO2 tanks, and gas hoses are all sold separately.
I haven’t heard of R-290, R-600a, R-513a, or R-448A refrigerant before. What is it?
R-290 (also known as high purity propane or CARE 40) and R-600a (also known as refrigerant grade Isobutane or CARE 10) are hydrocarbon refrigerants. R513a (also known as Opteon XP10) and R-448A (also known as Solstice N40) are HFO (hydrofluoroolefin) refrigerants. They are being used by some manufacturers in response to the EPA’s Significant New Alternatives Policy (SNAP) Program.
What size CO2 tank do I need for this beer dispenser?
The size of the CO2 tank you choose will be determined by the size of your beer dispenser unit and how often you are willing to refill the tank. Larger tanks will last longer than smaller tanks, but frequency and usage should also be taken into consideration. If you plan to store your CO2 tank inside the beer dispenser, then size will be a factor here since you will also need enough room to properly store your kegs. Your local beer supplier will be able to offer suggestions and show you the maximum tank size for your dispenser.
True Refrigeration TDD-4-HC Details
Serve your customers a cold and refreshing beverage with this True kegerator beer dispenser. This unit can hold (4) 1/2 barrel kegs to help keep your bar fully stocked on the busiest nights! Designed to accommodate the inevitable spill or leak, the unit's interior features a stainless steel floor, which won't rust or corrode. For additional durability, the unit boasts a black powder-coated steel exterior with door threshold protection and a stainless steel countertop with a reinforced lip. This tough construction helps minimize damage to the cabinet from routine loading and unloading, ensuring that it withstands the test of time in your bustling business.
Featuring 2 single tap towers and a two-way tapper manifold, this kegerator makes it easy to serve your patrons perfectly drafted beer. The unit features bright and even LED interior lighting that makes it easy to see what you're doing when switching between kegs. The easily replaceable, energy-efficient LEDs generate less heat than fluorescent bulbs to keep internal temperatures low, and because they last significantly longer than other lights, you'll save money on replacement costs over time.
For easy access, just swing open the 3 solid doors; you can be sure that they shut properly behind you thanks to their magnetic gaskets and positive seals. They even feature locks, so you can lock up beverages during off-hours. The high-density foamed-in-place insulation helps maintain temperatures and provides additional structural strength to the cabinet.
This kegerator beer dispenser ensures optimal performance by operating with a 1/4 hp refrigeration system that circulates R-290 refrigerant to maintain temperatures between 33 and 38 degrees Fahrenheit. R-290 refrigerant has an ozone depletion potential (ODP) of 0 and a global warming potential (GWP) of 3. This unit requires a 115V electrical connection for operation.
Overall Dimensions:
Width: 90 3/8"
Depth: 28 1/8"
Height: 37"
Height (includes draft arms): 52 3/4"
Capacity: 32.8 cu. ft.
Tap Tower Dimensions:
Column Diameter: 3"
This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.
Made in America
This item was made in the United States of America.
UL Classified EPH
This product has been certified by the Underwriters Laboratories (UL) to meet applicable ANSI/NSF standards and / or other food equipment hygiene codes and requirements.
5-15P
This unit comes with a NEMA 5-15P plug.
UL Listed, US & Canada
This product has been certified by the Underwriters Laboratories (UL) to meet applicable safety standards required for use in the United States and Canada.
Need Parts & Accessories?
Show replacement parts and accessories for True Refrigeration TDD-4-HC today!
Resources and Downloads for
True Refrigeration TDD-4-HC
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Warranty Info
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. Your warranty will be voided if installed in non-commercial or residential applications.