Ships free with Plus

Other Available Finishes:

  • Includes 2.5 lb. CO2 tank (ships empty), dual regulator, drip tray, tap, and "D" system keg coupler
  • Fits (1) ½ barrel keg
  • Includes casters for easy mobility
  • Attractive chrome guard rail
  • 115V; environmentally friendly R-600a refrigerant

The black Galaxy single keg beer dispenser is an ideal solution for your low volume beer serving needs.

Perfect for light-duty use at your small catered event, company party, or group gathering, this unit features foamed-in-place insulation and a powerful yet efficient refrigeration system that uses R-600a refrigerant to ensure that your beer stays at the optimum serving temperature. Plus, its plastic-lined interior is easy to wipe down and keep clean.

  • CSA US

    CSA US

    This item meets the standards imposed by the Canadian Standards Association (CSA) for use in the United States of America.

  • 5-15P


    This unit comes with a NEMA 5-15P plug.

2.5 lb. CO2 Tank and Dual Regulator

The included 2.5 lb. empty CO2 tank and dual CO2 regulator give you everything you need to keep the beer flowing until it's time to replace the keg. Plus, unlike many competitive beer dispensers, this model ships with a type "D" system coupler so that you can begin tapping kegs as quickly as possible.

Single Tap Tower

An 11 3/4" high, 3" diameter tower with a single tap allows you to quickly dispense cool, frosty products for your patrons. Plus, a removable drip tray makes cleaning up sticky spills and messes a breeze.

Designed for Light-Duty Use

The unit is comprised of a steel material and features a sleek, black painted finish. For visual appeal, an attractive chrome guard rail lines the top.

3" Locking Casters

Four 3" casters ensure easy transportation from event to event. Two of the casters have brakes for when you'd like the unit to remain stationary.

Customer Q&A Ask a Question

Can this kegerator be used outside?
No. This unit should be installed indoors, away from direct heat sources for maximum refrigeration efficiency. Outdoor use will void the machine's warranty. Using this unit outdoors, or in areas with high ambient temperatures, may result in the unit failing to function properly and eventual damage to the unit.
Can this kegerator be used to dispense ciders?
No. Beverages such as cider, wine, and coffee have high levels of acidity, and dispensing them through this unit may damage its internal parts. This unit was designed to dispense beer only, and failing to do so may void warranty coverage.
Can this unit be built into cabinetry?
It should not be built into cabinetry. This unit requires 3” of clearance on all sides for proper ventilation.
What size CO2 tank do I need for this beer dispenser?
The size of the CO2 tank you choose will be determined by the size of your beer dispenser unit and how often you are willing to refill the tank. Larger tanks will last longer than smaller tanks, but frequency and usage should also be taken into consideration. If you plan to store your CO2 tank inside the beer dispenser, then size will be a factor here since you will also need enough room to properly store your kegs. Your local beer supplier will be able to offer suggestions and show you the maximum tank size for your dispenser.

Watch More Videos

Beer Dispensers

Learn the difference between commercial kegerators, back bar coolers, and club top beer dispensers. Coming in different sizes with various features, our selection of beer dispensers will allow you to find a unit that fits your specific needs.

How to Assemble a Kegerator

A new kegerator may seem complicated to assemble but can really be put together in no time - watch this video for a step-by-step guide!

Find the right beer dispenser for your business, and keep your customers coming back for ice cold beer on tap. We offer a large selection of products, including kegerators, back bar coolers, club top beer dispensers to meet your needs. So what is the difference between each of these units? Our commercial kegerators come with 1, 2, and 4 draft arms that can hold from 1 to 5 kegs. If you’re looking to serve draft beer as well as cans and bottles all in one place, we have combination beer dispensing and back bar cooler units. Many of these units have a glass door that provides your guests with a clear view of the bottles inside for excellent merchandising. Our club top beer dispensers feature enclosed spaces for keg storage. Unlike other units, they feature a convenient flip top refrigerated storage area that can be used to store chilled bottles and bar glassware. We offer beer dispensers in black and stainless steel finishes to suit your preferences. Some units are also Energy Star and NSF certified. Whether you have limited space or you are expanding your bar area, we have a beer dispenser for your application.

Copy and paste the embed code above.
To assemble your kegerator, follow these steps. Before you begin, make sure to consult your specific manufacturer’s instructions before assembling your unit. If the unit has been transported on its side, let the unit stand upright for at least 24 hours before plugging it in. Move the unit to its final location, allowing for clearances for ventilation as per the manufacturer's recommendations. First you’ll need to install the draft tower. To do this, place a rubber washer on the top of the draft tower opening. Then, feed the beer line down through the opening into the interior cabinet. Next, place the draft tower on top of the opening and secure it with 4 mounting screws. Now feed the air hose into the draft tower from inside the cabinet. Finally, screw the tap handle onto the tap faucet. Next you’ll need to install the CO2 tank. Remember to keep the tank upright at all times. First, attach the beer line to the keg coupler, placing a rubber washer at the connection point. Next, attach the gas line to the CO2 regulator output barb and tighten the screw clamp. Connect the other end of the gas line to the keg coupler and tighten the screw clamp. Using a rubber washer and nut, attach the CO2 regulator to the CO2 tank. Next, screw the coupler onto the keg. When the coupler is fitted into place, push the coupler handle down to open the seal. Turn the handwheel on the CO2 regulator to open the air tank. Now switch the shut off valve to on, and you should hear the air enter the gas lines. Adjust the PSI between 10 and 15. Carefully place the CO2 tank into the cabinet and close the door. Now your kegerator is set up and ready to dispense beer!

Choosing the Best Kegerator For Your Bar

Copy and paste the embed code above.

Compare to Other Products

Overall Dimensions:
  • Width: 21 3/8 Inches
  • Depth: 26 7/8 Inches
  • Height: 45 Inches
  • Capacity: 6.1 cu. ft.
Interior Dimensions:
  • Width: 17 5/16 Inches
  • Depth: 16 1/2 Inches
  • Height: 27 5/16 Inches

Resources and Downloads

Specsheet Specsheet Manual Manual Galaxy Warranty 1 Year Warranty Energy Guide Energy Guide

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

Note: Avantco Refrigeration equipment with a labor warranty purchased prior to October 15th 2020 is warranted for 1 year parts & labor / 5 year compressor. RESIDENTIAL USERS: The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.

Customer Reviews

  • Overall User Rating: Galaxy Single Tap Kegerator Beer Dispenser - Black, (1) 1/2 Keg Capacity

    4.4 stars from 5 reviews


    People Talk About:

    job kegerator kegs far holds keg perfectly place pony price
    1 out of 1 found this review helpful
    it's been almost a year now i am using this product and so far i have to say i am very satisfied. As it is very cheap compare to it's competitor but i has done it's job promptly so far
    1 out of 1 found this review helpful
    This is a great kegerator for the cost. We put this in our showroom and it does s good job. It holds a steady temperature.
    I love this keg. High quality for the price. It is very easy to put together and works perfectly. The color goes well with anything.
    We purchased this kegerator for our coffee shop to have cold brew on nitro. It was a breeze to set up and works perfectly. It holds two pony kegs or a pony keg and some pitchers of iced tea with plenty of room. I would order it again in a heartbeat.
    This is a pretty decent kegerator for the price. My only complaint is that the dispensing tower locks into place via twisting, which does not do a good job of holding it super steady. The way it is set up also does not allow for screwing the tower into place...

Leave a review of this product!

If you've used this product, log in and leave a review to tell us and other customers what you thought about it.

Login or Register