Watts WD-10-THD 20 lb. Grease Trap with Threaded Connections
- Prevents grease from entering plumbing and septic systems
- 11-gauge cold rolled steel body
- 10 GPM flow rate and 20 lb. grease capacity
- 2" threaded inlet & outlet
"You May Also Need" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.
|Length||21 3/4 Inches|
|Flow Rate||10 GPM|
|Inlet and Outlet Size||2 Inches|
The Watts WD-10-THD 20 lb. grease trap with threaded connections prevents greasy substances from entering plumbing systems, septic fields, and wastewater treatment facilities where they cannot be processed properly and could harm the environment.
Grease traps like the Watts WD-10-THD are often used with cooking or prep sinks, pot sinks, and commercial dishwashers in various types of commercial food service operations. A flow restrictor on the inlet side of the interceptor slows incoming effluent and redirects it through baffling inside the grease trap.
The Watts WD-10-THD Grease Interceptor features a body constructed of 11-gauge cold rolled steel with an oven-cured, acid-resistant baked gray epoxy coating. Other standard features include a solid steel cover with gasket, a removable baffle assembly, a deep seal trap with cleanout, no hub connections, and an external cast iron flow control fitting (flow restrictor).
The Watts WD-10 grease trap has a grease capacity of 20 lb., and a flow rate of 10 GPM. It is PDI (Plumbing & Drainage Institute) Certified, and meets the industry and PDI Standard PDI-G101 for separation efficiency. This standard specifies that the grease trap must maintain 90% separation efficiency up to its rated grease retention capacity.
21 3/4"L x 14"W x 12"H
Flow Rate: 10 GPM (Gallons Per Minute)
Grease Capacity: 20 lb.
Threaded Inlet & Outlet Size: 2"
This item has been certified by the Plumbing and Drainage Institute (PDI), which promotes the advancement of Engineered Plumbing Products.
Watts WD-10 20 lb. Grease Trap
Drain Opener / Maintainer
Component Hardware EFI-UB Grease Interceptor
Watts WD-25-A 50 lb. Grease Trap with Partially Automatic Draw-Off
Watts GI-75-K 150 lb. Grease Trap
Watts Gasket for Grease Trap
Watts WD-75-A 150 lb. Grease Trap with Partially Automatic Draw-Off
Watts WD-20-L-THD 40 lb. Low Profile Grease Trap with Threaded Connections
Watts WD-35-L 70 lb. Low Profile Grease Trap
Watts WD-50 100 lb. Grease Trap
People Talk About:grease Trap installed traps before install job smell improvement expect
this one is good price. but then when i open this grease trap first time.. the smell was disgust. i was surprise with the smell.... if you have to install grease trap for your business, you have to expect that.
Brian P. from Coffee Speaks Posted on 03/30/2017
This grease trap serves it's purpose: to catch grease before it goes into the drainage system. It's a necessary purchase and it does it's job.
David F. Posted on 01/16/2017
I don't know much about grease traps, but I ordered this becomes my plumber told me I had to. It's working well I assume, since it's been installed for over a year now and I've never had a problem with it.
Tiffanee L. from Tiffanee & Co. Bakery Posted on 02/29/2016
We love our new grease trap! It was cheap, easy to install, and came quickly in the mail. This is a big improvement over the 10 year old one we had before. I wish we had done it sooner!
Jane B. from Pie Shop, Inc. Posted on 09/23/2014
The Dormont WD-10-THD Grease Interceptor 20 lb. Grease Trap with Threaded Connections came in a timely manner, and does the job. Give it a try.
Judith B. from Five Points Coffee Posted on 04/29/2013
Get paid to review this product!
If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.Login or Register