Choice Food Prep Potato Wedge Cutter - 6 Wedge French Fry Cutter

Save your money and buy a better brand if you are using it for a commercial. The blade is too dull where you have to use extreme force to push through. My bargain for cheap end up costing more money at the end since this is an online order.

I love the heavy duty cast iron body of this cutter; unfortunately, the blade assembly is flimsy. I've been using it to cut apples. Granted, this is a French Fry cutter, so it's designed to cut potatoes, but anything that's strong enough to cut potatoes should be strong enough to cut apples which are considerably softer. In fact, if you search for apple cutters on this site, you'll see that most of the results are potato cutters. Anyway, I've used this three times, each time for around an hour and a half. In that time, I've gone through five blade assemblies. None of them have lasted longer than an hour. As you can see in the photo, the frame of the blade assembly is heavy duty, but the blades themselves are very poorly secured in the frame such that you can easily wiggle them and move them up and down Read More

Tried the russet potato in the machine and found I needed to ram the potato with the handle maybe 3 or 4 times to get it to go entirely through the machine. Tried the Idaho potato and found it was much easier to ram it through the cutter. Mind you, this was all done while the machine is sitting on my kitchen table. The russet potato seemed to be a much denser potato, as to why it took a little more effort to pass through the cutter. I personally liked the flavor of the Idaho potato over the taste of the Russet potato because the russet taste a bit bitter to me when fried. I will not be attaching this machine to my wall because it works out just fine using it on my kitchen table. As for clean up, I will use a tooth pick to push through any Read More

Great fry cutter. The metal is very heavy & thick which keeps it strudy & prevents it from breaking quickly. The 1/2" cut is a perfect sized fry.

We have used this EVERY day for 4 years and counting. We've bought replacement slicing pieces but the thing works great. Everyone loves our french fries.

I really like this cutter. I bought it to make fries at home. It is sturdy, and having the rubber cups stops it from sliding. The 1/2" blade can cut even big russet potatoes, though it take s some force. I am fond of using small yellow potatoes to make stubby small fries. The cutter cuts then without much efford. I really like the cutter.

Made extra heavy duty.I have a 1/4 and a 3/8 inch blade and the 3/8 blade works a lot better than the 1/4 blade does. The small the blades the harder it is to push.I love it.

This fry cutter was much needed as cutting them by hand was just too much. We did our research and I’m so glad we did. We saw similar fry cutters at a big retailer that was almost 3 times the price. The one we purchased here is well made, easy to use and it’s made such a difference in the way we make fries. It’s such great quality. We plan on buying multiple size blades. If you’re on the fence, get it. You will not be sorry!

Works great. My fries are fantastic when using this. It does need to be attached to the wall if you are using it often though.

Great value for the price offered! It even works on sweet potatoes, we use it on a regular basis and it has yet to show any signs of wear and tear. It cleans up like a dream which makes life a lot easier.

I would give it 4 stars but the suction cups fall off. We mounted it to a cutting board and it has stood the test of having high school students use and abuse it.

This french fry cutter has saved me hundreds of dollars by being able to make my own fries. Plus, I don't need as much freezer space for frozen fries any more. The fasteners need periodic tightening. Very durable and is not showing any signs of wear or damage despite me always putting it away to air dry.

This item is useless with the 1/4" cutter. It mashes the potato before it will go thru the cutters. Took out some of the blades and now make 1/4" x 1/2" fries. It would be nice if they offered some sution cups with it to hold it on the countertop.

Worked great to cut potatoes into fries especially when I had 20lbs of potatoes

Really great french fry cutter. I was sick of mucking about with a knife trying to get a consistent size and with this thing it's a piece of cake. The packaging was a little lackluster, It was a cardboard box and some foam inserts. The box looked a little beat up when I got it but all the parts were pristine when I opened it up. Granted this thing is 100% heavy metal so to do any damage it'd probably have to get dropped off a moving truck and then get run over by a different truck.

This is a commercial piece of kitchen equipment, not a cheap knock off. Strong and sturdy. Love it.

Works as advertised. Does a good job on potatoes and perfect French Fries.

As a new customer and restaurant owner, I am unfamiliar with certain products. However, I am pleasantly surprised by the quality of the cast iron and stainless steel fry cutter. I will certainly consider ordering additional items for use in my restaurant.

Excellent fry slicer when mounted properly on the wall. Perfect size fair fry maker, cleans very easily.