$3,574.08/Each

This product is no longer available. We've left this page up for reference only.

  • Adjustable 40 - 60 degree Fahrenheit temperature range
  • Narrow depth design
  • Stainless steel exterior
  • 2 keg capacity
  • Designed to chill and hold wine at 40-60 degrees Fahrenheit
  • Galvanized steel top
  • Tested to perform in ambient temperatures of 100 degrees Fahrenheit
UPC Code:400010946938
Shipping:Usually Ships in 4-5 MonthsNot eligible for expedited shipping
Beverage-Air BB48Y-1-SS-WINE Specs
Quantity1/Each
Width48 Inches
Depth23 1/2 Inches
Height34 Inches
Interior Width36 Inches
Interior Depth18 1/2 Inches
Nominal Depth Narrow
Interior Height29 1/2 Inches
Amps5 Amps
Hertz60 Hertz
Phase1 Phase
Voltage115 Volts
Capacity12.1 cu. ft.
Casters No
Color Silver
Compressor Location Side Mounted
Door Style Swing
Door Type Solid
Exterior Finish Stainless Steel
Features Wine Model
Horsepower1/4 HP
Made in America Yes
Number of Doors2 Doors
Number of Kegs2
Number of Shelves4 Shelves
Plug Type NEMA 5-15P
Refrigerant Type R-134a
Temperature Range40 - 60 Degrees F
Top Type Below Counter

Customer questions about this product

What does the “H” or “HC” mean in the newer Beverage-Air model numbers?
This is a representation that the unit is using a “Hydrocarbon” refrigerant. This would include both R290 and R600a refrigerants. They are being used as an eco-friendly refrigerant by Beverage-Air in response to the EPA’s Significant New Alternatives Policy (SNAP) Program. Read more about this program in our blog post on Refrigerant Regulations.
Does Beverage-Air warrant this item for use in a food truck?
This item is covered under Beverage-Air's warranty contingent upon the unit being kept in a controlled climate. This means that the interior of the food truck may not be susceptible to extreme high or low temperatures. If warranty service is required, the truck must be able to sit stationary for 24-48 hours to allow for a technician to service the equipment.
Ask your own question!

Beverage-Air BB48Y-1-SS-WINE Details

Designed to chill and hold wine at optimum temperatures, this Beverage-Air BB48Y-1-SS 48" stainless steel back bar wine series refrigerator with 2 solid doors is the perfect addition to your bar, restaurant, or other dining establishment! This unit offers the same convenient features of a back bar refrigerator, with the added convenience of a refrigeration system specifically designed to hold red and white wines at a 40 to 60 degrees Fahrenheit temperature range. It has a capacity of 2 kegs. Stainless steel shelf clips ensure stable support and longevity.

Equipped with a 1/4 hp refrigeration system, this model uses R-134a refrigerant to maintain a consistent temperature range for storage of all your fine wines! Foamed-in-place CFC and HCFC-free polyurethane insulation ensure energy efficiency.

Stainless steel construction; galvanized steel top

- (4) coated wire shelves and adjustable thermostat included

- Self-closing doors include key locks and magnetic door gaskets for positive door sealing

- Interior incandescent lighting illuminates products for easy visibility

- Automatic condensation control

- Requires a 115V electrical connection

Overall Dimensions:
Width: 48"
Depth: 23 1/2"
Height: 34"

Interior Dimensions:
Width: 36"
Depth: 18 1/2"
Height: 29 1/2"
Capacity: 12.1 cu. ft.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • UL Classified EPH

    UL Classified EPH

    This product complies with UL EPH standards and meets ANSI/NSF requirements.

  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

  • UL US & Canada

    UL US & Canada

    This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL) for use in the United States of America and Canada.

Resources and Downloads for
Beverage-Air BB48Y-1-SS-WINE

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

Note: Beverage Air equipment purchased in 2013 or later will have a 3 year parts and labor warranty. Equipment purchased prior to 2013 will have a 1 year parts and labor warranty. RESIDENTIAL USERS: Your warranty will be voided if installed in non-commercial or residential applications.

Leave a review of this product!

If you've used this product, log in and leave a review to tell us and other customers what you thought about it. Get paid up to $16 for submitting one of the first text, photo, or video reviews for this item. View your account for details.

Login or Register