After a recommendation from a friend, I decided to have a look at the Avantco SL310 slicer to replace a cheap slicer for my home kitchen use where I slice meat 2 or 3 times a week. I wanted something durable that could slice deli thin slices or thicker as needed and something that would last me for a LONG time. I decided to give the Avantco a try and I'm glad I did. After using this slicer for several months I am convinced that it will last me for a LONG time and I am quite satisfied with it. It's durable and easy to use. In my opinion this slicer is rather easy to clean. There are two twist off knobs require to remove the slider and the blade face plate and then three phillips head screws to remove the blade. Read More
Other Available Sizes:
- Razor sharp 10” stainless steel blade cuts slices up to 1/2” thick; rated for 3-4 hours of use daily
- Easy to use built-in sharpener ensures your blade stays like new
- Adjustable thickness knob allows for precise slicing down to 1/16”
- High quality aluminum construction with a 8 ”x 8” product tray
- Manual feed carriage glides smoothly for easy operation and is removable for cleaning
The Avantco SL310 10" manual gravity feed slicer features a compact design that's ideal for small operations.
An ideal addition to small meat slicing operations, this light-duty slicer provides 1/4 hp of power so that you can quickly slice up your own meats or vegetables for sandwiches, pizzas, and appetizers. Rated for 3-4 hours of use daily, this slicer is perfect for low-volume applications where a slicer is used less than 1 hour per day, this unit is a great choice for coffee shops, pizzerias, small restaurants, and catering businesses.
This unit comes with a NEMA 5-15P plug.
This item meets the electrical product safety standards imposed by the ETL, a division of the Intertek Group, for use in the United States.
For convenient sharpening, this unit comes equipped with a built-in sharpening assembly.
Stainless Steel Blade
The stainless steel blade is designed to resist corrosion and maintain a sharp edge for slicing.
Fixed Ring Guard
This unit has a fixed ring guard for safety which prevents unintentional contact with the blade.
This slicer is small and compact so that you can fit it into your small business more easily! The perfect size to place on a counter in your coffee shop or small restaurant, this slicer can also be moved for more thorough cleaning.
8" x 8" Product Tray
This tray can hold foods up to 8" wide by 6 1/2" high.
This meat slicer's carriage is removable for thorough cleaning at the end of the day.
Adjustable Slice Size
The cut thickness is easily adjustable from 1/16" to 1/2".
High Quality Aluminum Construction
This 10" slicer is made of top quality aluminum for durability and ease of cleaning. It has a sleek, professional appearance that means it will fit right in to your commercial kitchen or front of the house sandwich prep area.
Customer Q&AAsk a Question
Compare to Other Products
- Width:17 Inches
- Depth:21 Inches
- Height:16 Inches
- Width:8 Inches
- Height:6 1/2 Inches
Other Products from this Line
- Rated 5 out of 5 starsAvantco SL312 12" Manual Gravity Feed Meat Slicer - 1/3 hp
- Rated 4 out of 5 starsAvantco SL512 12" Manual Gravity Feed Meat Slicer - 5/8 hp
- Rated 5 out of 5 starsAvantco SL713MAN 13" Medium-Duty Manual Gravity Feed Meat Slicer - 3/4 hp
- Rated 3 out of 5 starsAvantco SL612A 12" Medium-Duty Automatic Meat Slicer with Manual Use Option - 1/2 hp
- Rated 4 out of 5 starsAvantco SL309 9" Manual Gravity Feed Meat Slicer - 1/4 hp
Frequently Purchased Together
- Rated 4 out of 5 starsAvantco MX20 20 Qt. Planetary Stand Mixer with Guard & Standard Accessories - 120V, 1 1/2 hp
- Rated 5 out of 5 starsNoble Chemical Lubriquik 11.5 oz. Food Grade Aerosol Si-Dry Silicone Lubricant (AMR A329) - 12/Case
- Rated 5 out of 5 starsCambro 2SFSCW135 2 Qt. Clear Square Polycarbonate Food Storage Container with Winter Rose Gradations
- Rated 5 out of 5 starsAmerican Metalcraft CD6 6-Compartment Satin Finish Stainless Steel Condiment Bar
- Rated 4 out of 5 starsAvantco W62 Aluminum Free Standing Heat Lamp with 2 Bulbs - 120V, 500W
- Rated 5 out of 5 starsRegency 17" x 15" Wall Mounted Hand Sink with Gooseneck Faucet
- Rated 5 out of 5 starsTaylor 3507 2 1/2" Dial Refrigerator / Freezer Thermometer
- Rated 5 out of 5 starsChoice Half Size 13" x 18" 19 Gauge Wire in Rim Aluminum Bun / Sheet Pan
People Talk About:slicer meat clean great easy cleaning slicing small works price
The Avantco SL310 10" Manual Gravity Feed Meat Slicer - 1/4 hp is a great product for the prices. It is easy to use and although basic suits all of our needs in a small restaurant/deli
cheaply made. the foot broke off after six months and can't be repaired. They wont cover it under warranty saying it is "damaged". Well, may be if it want so cheaply made the metal would not break under normal use. Now I have to how the whole thing away.
We appreciate your review, Nick. We wish this Avantco SL310 10 inch Manual Gravity Feed Meat Slicer - 1/4 hp would have worked out for you. Our Customer Solutions team will remain in contact with you about this.
Went to use this slicer and after the first use, slid the slicer over to clean underneath it. One of the feet broke off while sliding it across the stainless steel table. Contacted WebstaurantStore and they said this was product abuse and would not cover any repairs! PLEASE NOTE ALL HEAVY SLICERS MUST ME LIFTED CAREFULLY TO CLEAN UNDERNEATH AS SLIDING WILL VOID WARRANTY!
We appreciate your review, Maxwell. We wish this Avantco SL310 10 inch Manual Gravity Feed Meat Slicer - 1/4 hp would have worked out for you. Our Customer Solutions team will remain in contact with you if you have further questions.
Outstanding value for the price! Large enough to hold a brisket in the carriage and a wide range of thickness selections from paper thin to over 1/2". My only complaint is the meat guard on the back of the blade does not sufficiently match the profile of the blade to keep stray meat from being pulled behind the blade. Other than that I would not hesitate to purchase again or recommend this Avantco slicer.
Love this! Just used, cleaned & reassembled for the first time. Sliced an eye of round into paper thin slices with no problems. Cleaning it properly is a 15 minute job, but I'm super fussy. Actually cleaning it was not as bad as I expected. This is a quality piece of equipment, I'm very pleased!
Slicey slicey slicey! It's slice city over here at the restaurant ever since we got this slicer. We alive bacon. And we slice arrows. And we slice carrots. We slice ham. It's more than good. It's grrrrrrrrereeat!
For a light duty slicer, you can't beat the price. Light duty by my definition means I have to take time to clean it. A cut proof glove is a must for cleaning this thing. The cleaning kit helps with the every day wipe down, but if you slice something fatty (bacon) then you'll want to clean it down deep which takes some doing. As far as actual slicing goes, this thing definitely holds it's own. The carriage has smooth action and the slices are clean.
This is one of the great investment I made for my kitchen. It is very easy to use, to clean and most of all is it very compact. Higly recommend for small space.
This slicer is great for the amount of slicing we do and it runs well....but why am I getting discoloration on products like ham? The ham slices have black marks on them. Is this oxidation and how can I fix it?
Thank you for your review, Nancy Clark/Kitchen! We are sorry this product has not worked well for you. A Customer Solutions Representative will contact you soon!
Well worth the money. I have waited before writing this review and after owning the slicer for 4 years next month I feel I can give a pretty accurate review. I use this about every 6 weeks to slice roughly 100 pounds of partially frozen beef and pork, whole ribeye roasts and pork loins, so it gets a workout. Have never had one problem with it and slices great. I have sliced from almost see thru thin to 1/2" thickness. Very consistent, but keep in mind that the thickness will appear different between thawed meat and frozen. Cleaning, yes, it does take a bit of work to give it a good detailed cleaning. If you use the right tools and don't over torque the screws when putting it back together, you will never have a problem. I take the bottom tray off (5 screws) and then you can the the 2 shroud nuts off which makes cleaning so much easier. Blade screws should be Swedish torque (nicensnug), not German torque (goodntight). Well worth the 20 minute clean.
Not all that great, We doon't really use our slicer a lot so when my old Hobart broke after a liftime of use , we went with this one ... It does slice ok after getting some use to it, but it is a pain to clean. We spend more time taking it appart for cleaning than we do use it. Super flomsy feel to it too, but that is to be expected from that brand since all they make is "disposable".
Thank you for your feedback! We’re sorry you did not prefer this product. For recommendations, please contact our Customer Solutions team.
I purchased this for home use only. It is fairly light and performs well, very easy to clean. Working in kitchens all my life I always want to get the biggest and best but this satisfy's all my needs.
I love this machine . It is small and practice. Easy to use and great quality. I recommend you this producto because it's price is lower than many others.
This slicer is powerful enough for my needs and small enough to move around by myself. Not the strongest motor but perfect for my needs. Sharpens easy and it is fairly easy to clean.
Highly disappointed in the components with this slicer. It has been used a handful of times in the last 4 years and the metal is tarnished. We cared for it properly and it was stored in a dry space. Contacted the company who told us not to air dry after washing, then sent a video telling us to air dry all parts. They would not stand behind their product as their minimal warranty of 1 year was up. I found them to be demeaning and lacked care for their product they produced. Will definitely be going with a different company from now on. Customer service is very poor.
We appreciate your review, Victor. We wish this Avantco SL310 10 inch Manual Gravity Feed Meat Slicer - 1/4 hp would have worked out for you. Our Customer Solutions team will remain in contact with you about this.
I would highly recommend this Meat Slicer. It is made of heavy duty rust proof material. It is very easy to use, and most importantly, it is commercial grade.
Been using this machine for over a year and it still works just fine! It does not work if you want super super thin cuts almost paper like! But it works fine for regular ham.
This is one of my favorite Webstaurantstore purchases. This slicer is very sharp, and a fairly powerful motor. I use this often for basic prep and serving uses. It does a great job with roast beef and turkey and other soft meats, but can trouble getting through aged salumi. Its impossible to get a thin slice of prosciutto or capicola, both are dense cold cuts. Also, at 10" it wont fit a whole top round, but when we have large items, we just usually split them in half and they slice perfectly. Thoroughly cleaning this machine is not for the faint of heart. It doesnt break down completely and getting into the little nooks and crannies takes work. It is a significant trade off, but at this price and value, its one we are comfortable with.
This Avantco meat slicer is just what I needed for slicing ham, roast beef, and bacon. I had to cut the pork belly in half in order to slice it, but clients didn't mind it one bit. Sliced the roast beef and ham really well. I like that adjusting the thickness is easy. Taking it apart for cleaning was a little difficult. All in all, a great little slicer that suits my needs just fine.
User Submitted Photos & Videos
Leave a review of this product!
If you've used this product, log in and leave a review to tell us and other customers what you thought about it.Login or Register