$6,012.36/Each

Contact us for details

Ships free with Plus

Call 717-392-7472 (Mon-Thur 24 Hours, Fri 12AM-8PM EST
Sat & Sun: 9AM-4PM EST)

Protect Your Product with Safeware

Protection Powered by Safeware

  • Features a Load-Sure guard to protect against improper loading
  • Easy-to-use digital microprocessor control
  • Boasts a thermostatic expansion valve metering device for quick refrigeration recovery times
  • Includes LED lighting and guaranteed for life cam-lift hinges and vertical door handles
  • 115V; 4040 BTU compressor; eco-friendly R-290 refrigerant
Shipping:
Traulsen: How to Install Universal Trayslides on G Series 2-Section

Traulsen: How to Install Universal Trayslides on G Series 2-Section

Universal Trayslides: How to Install on G-Series 2-Section. Step 1: Label the top side of each Pilaster. The top should have the smaller gap from end to first cut out. Step 2: Remove the Loadsure Guard (duct). Using a flat head screwdriver, pop out the plugs to reveal the screw holes. Step 3: Install the outside panel pilasters (Part # 342-60030-00) with 6 thumb screws each. Step 4: Install the other Pilasters in the same fashion. Back left Pilaster (Part # 342-60033-00). Front left Pilaster (Part # 342-60031-00). Step 5: Begin installing the Trayslides from bottom to top. (Part # 701-600392-00). Step 6: Test the fit to make sure that the Pilasters and Trayslides have been installed level.

Copy and paste the embed code above.

Watch this video to learn how to install universal Traulsen Trayslides on G Series 2-Section.

Traulsen: How to Install #4 Trayslides on G Series 2-Section

Traulsen: How to Install #4 Trayslides on G Series 2-Section

#4 Trayslides: How to Install on G-Series 2-Section. Step 1: Label the top side of each Pilaster. The top should have the smaller gap from end to first cut out. Step 2: Remove the Loadsure Guard (duct). Using a flat head screwdriver, pop out the plugs to reveal the screw holes. Step 3: Install the outside panel pilasters (Part # 342-6026-00) with 6 thumb screws each. Step 4: Install the other Pilasters in the same fashion. Back left Pilaster (Part # 340-60034-00). Front left Pilaster (Part # 342-60032-00). Step 5: Begin installing the Trayslides from bottom to top. (Part # 701-040842-00). Step 6: Test the fit to make sure that the Pilasters and Trayslides have been installed level.

Copy and paste the embed code above.

Watch this video to learn how to install #4 Traulsen Trayslides on G Series 2-Section.

Traulsen: How to Install #1 Trayslides on G Series 2-Section

Traulsen: How to Install #1 Trayslides on G Series 2-Section

#1 Trayslides: How to Install on G-Series 2-Section. Step 1: Label the top side of each Pilaster. The top should have the smaller gap from end to first cut out. Step 2: Remove the Loadsure Guard (duct). Using a flat head screwdriver, pop out the plugs to reveal the screw holes. Step 3: Install the outside panel pilasters (Part # 342-6026-00) with 6 thumb screws each. Step 4: Install the other Pilasters in the same fashion. Back left Pilaster (Part # 340-60034-00). Front left Pilaster (Part # 342-60032-00). Step 5: Begin installing the Trayslides from bottom to top. (Part # 701-60032-00). Step 6: Test the fit to make sure that the Pilasters and Trayslides have been installed level.

Copy and paste the embed code above.

Watch this video to learn how to install Traulsen Trayslides on G Series 2-Section.

Traulsen G21001-032 Specs
Width 52 1/8 Inches
Depth 35 Inches
Height 83 1/4 Inches
Voltage 115 Volts
Capacity 46.5 cu. ft.
Casters Yes
Compressor Location Top Mounted
Construction Stainless Steel and Aluminum
Door Type Glass
Dutch Half Doors Yes
Features LED Lighting

Self-Closing Doors
Hinge Location Left/Right
Made in America Yes
NSF Listed Yes
Number of Doors 4
Number of Shelves 6
Refrigerant Type R-290
Sections 2
Temperature Range 34 - 38 Degrees F
Total BTU 4,040

Customer questions about this product

Can I use the top of my unit for storage?
Nothing should be stored on top of your unit. Typically, top mount refrigerators and freezers do not have an actual top. If you’re looking for extra storage space, we recommend choosing a bottom mount unit.
I haven’t heard of R-290, R-600a, R-513a, or R-448A refrigerant before. What is it?
R-290 (also known as high purity propane or CARE 40) and R-600a (also known as refrigerant grade Isobutane or CARE 10) are hydrocarbon refrigerants. R513a (also known as Opteon XP10) and R-448A (also known as Solstice N40) are HFO (hydrofluoroolefin) refrigerants. They are being used as an eco-friendly refrigerant by some manufacturers in response to the EPA’s Significant New Alternatives Policy (SNAP) Program. Read more about this program in our blog post on Refrigerant Regulations.
Can this item fit through a standard height 80" doorway?
Due to the height of this item, it may not be able to fit through a standard 80" tall doorway when standing upright. Please consider the best means of entry before purchasing, or measure your entryway to ensure that you will be able to bring your order inside if the item cannot be carried on its side.
Ask your own question!

Traulsen G21001-032 Details

This Traulsen G21001-032 52" two section glass half door reach-in refrigerator utilizes microprocessor controls and 2" of foamed in place insulation to provide outstanding temperature preservation and performance! Each durable half door reach-in refrigerator features a durable stainless steel front and doors, with anodized aluminum sides and interior construction. The glass doors allow staff members to see the contents of the refrigerator and locate the items that they need before opening the door. Also, the half door design helps maintain interior temperatures and conserve energy since you only need to open one section at a time.

The spacious interior of this Traulsen two section half door reach-in refrigerator comes standard with 6 epoxy coated wire shelves, and automatically activated lighting with a concealed switch. The right/left hinged doors' cam lift hinge design is guaranteed for life, and features a self-closing design, with a stay open feature when the door is opened past 120 degrees. The doors also come with locks to help protect your supply of ingredients during off hours.

The unit features a top mounted, self-contained, balanced 4040 BTU refrigeration system that uses eco-friendly R-290 refrigerant to hold temperatures between 34-38 degrees Fahrenheit. This specialized refrigerant has an ozone depletion potential (ODP) of 0 and a global warming potential (GWP) of 3, making it an environmentally-responsible choice for your business.

Traulsen's unique clockwise airflow pattern keeps cold air in, and warm air out whenever the door is opened. Also, a Load-Sure guard helps to prevent improper loading for better performance. A gasket-protecting metal door pan, and removable vinyl magnetic door gaskets ensure durability and outstanding temperature preservation. Four 6" casters with brakes make the refrigerator easy to move for cleaning. A 115V electrical connection is required for operation.

Overall Dimensions:
Width: 52 1/8"
Depth: 35"
Height: 83 1/4"
Capacity: 46.5 cu. ft.

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

  • NSF Listed

    NSF Listed

    This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • ETL Sanitation

    ETL Sanitation

    This item meets the sanitation standards imposed by the ETL, a division of the Intertek Group.

  • ETL US & Canada

    ETL US & Canada

    This item meets the electrical product safety standards imposed by the ETL, a division of the Intertek Group, for use in the United States and Canada.

  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

Resources and Downloads for
Traulsen G21001-032

Warranty Info

Note: Traulsen equipment has a 3 year parts and labor warranty. Traulsen compressors have a 5 year warranty. RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.

Leave a review of this product!

If you've used this product, log in and leave a review to tell us and other customers what you thought about it. Get paid up to $16 for submitting one of the first text, photo, or video reviews for this item. View your account for details.

Login or Register