$4,143.60/Each

Ships free with Plus

Contact us for pricing

Call 717-392-7472 (Mon-Thur 24 Hours, Fri 12AM-8PM EST
Sat & Sun: 9AM-4PM EST)

Other Available Hinging Options:

  • Features a Load-Sure guard to protect against improper loading
  • Easy-to-use digital microprocessor control
  • Boasts a thermostatic expansion valve metering device for quick refrigeration recovery times
  • Includes LED lighting and guaranteed for life cam-lift hinges and work flow door handle
  • 115V; 1/3 hp compressor; eco-friendly R-450A refrigerant
Shipping:
View all Traulsen Reach-In Refrigerators

Traulsen

Traulsen G Series Airflow

You May Also Need

Provide the perfect cold storage solution in your kitchen with this Traulsen G11010 30" G Series Reach-In Refrigerator with Right-Hinged Glass Door.

Perfect for restaurants, bakeries, and other commercial food settings, this refrigerator features a durable and clean-looking exterior with a stainless steel front door and gray painted sides. Featuring 24.2 cu. ft. of interior storage, it also provides enough room to store your product. Plus, the exterior grille that covers the top-mounted refrigeration system is easy to remove for preventative maintenance or to allow necessary repairs.

  • NSF Listed

    NSF Listed

    This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.
  • Made in America

    Made in America

    This item was made in the United States of America.
  • ETL US & Canada

    ETL US & Canada

    This item meets the electrical product safety standards imposed by the ETL, a division of the Intertek Group, for use in the United States and Canada.
  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

Convenient, Efficient Design

This refrigerator features a rugged construction with a glass, self-closing right hinged door and a cam lift hinge design that is guaranteed for life. Its top mounted refrigeration system and 1/2 hp compressor is designed to hold temperatures between -5 and 0 degrees Fahrenheit. Plus, Traulsen's unique clockwise airflow pattern keeps cold air in, and warm air out, whenever the door is opened.

Spacious Interior

The interior of the unit offers 24.2 cu. ft. of cold storage space. 3 epoxy coated wire shelves are housed inside, each capable of accommodating 225 lb. of vegetables, meat, and other foods.

Easy to Maneuver

This large, spacious refrigerator features four 6" casters with brakes to make moving it a breeze! This keeps it locked in place during use, but makes routine cleaning and maintenance simple.

Customer Q&A Ask a Question

Can I use the top of my unit for storage?
Nothing should be stored on top of your unit. Typically, top mount refrigerators and freezers do not have an actual top. If you’re looking for extra storage space, we recommend choosing a bottom mount unit.
Can this item fit through a standard height 80" doorway?
Due to the height of this item, it may not be able to fit through a standard 80" tall doorway when standing upright. Please consider the best means of entry before purchasing, or measure your entryway to ensure that you will be able to bring your order inside if the item cannot be carried on its side.
Traulsen: How to Install Universal Trayslides on G Series 1-Section
Traulsen: How to Install #4 Trayslides on G Series 1-Section
Traulsen: How to Install #1 Trayslides on G Series 1-Section

Watch More Videos

Traulsen: How to Install Universal Trayslides on G Series 1-Section

Watch this video to learn how to install universal Traulsen Trayslides on G Series 1-Section.

Traulsen: How to Install #4 Trayslides on G Series 1-Section

Watch this video to learn how to install #4 Traulsen Trayslides on G Series 1-Section.

Traulsen: How to Install #1 Trayslides on G Series 1-Section

Watch this video to learn how to install #1 trayslides on a G-series 1-section!

Transcript Embed
Universal Trayslides How to install on G-Series 1-Section Hi! Today i'll be showing you how to install our universal trayslides into a G-Series single section. Before installing the new trayslides, we must first remove the shelves. After removing shelves and pins, go up and down the cabinet on the front and back panel using a flat head screwdriver - popping plugs out, revealing the screw holes for the pilasters. After removing the plugs inside, it's time to install the pilasters. There's two different sets of pilasters: one set is for the front left and back right and one set is for the front right and back left. To determine which pilaster you're looking at, take a look at the top cut-out of each pilaser. One has a very thin gap on top and one has a very tick gap on top. The thick gap should be on bottom. After all the pilasters are installed, it's time to install the trayslides. In the universal kit, there should be 14 total- 7 for each side. Once all the trayslides have been installed, double check to make sure your spacing ins correct.

Copy and paste the embed code above.
Transcript Embed
#4 Trayslides How to install on G-Series 1-Section Hi! Today i'll be showing you how to install our #4 trayslides into a G-Series single section. Before installing the new trayslides, we must first remove the shelves and shelf pins inside already. After removing shelves and pins, go up and down the cabinet on the front and back panel using a flat head screwdriver - popping plugs out, revealing the screw holes for the pilasters. Once the plugs have been removed, it's time to install the pilasters. There's two different sets of pilasters: one set is for the front left and back right and one set is for the front right and back left. To determine which set you're looking at, take a look at the top cut-out of each pilaser. One has a very thin gap on top and one has a very tick gap on top. The thick gap should be on bottom for all of them. After all the pilasters are installed, it's time to install the trayslides. In the #4 kit, there should be 4 pieces just like this to be installed. After the trayslides have been installed, check to make sure your spacing ins correct.

Copy and paste the embed code above.
Transcript Embed
#1 Trayslides: How to Install on G-Series 1-Section. Hi, today i'll be showing you how to install our #1 Trayslides on a G-Series single section. Before installing the new trayslides, we must first remove the shelves inside. Next, unscrew all the pins inside. After all the pins have been removed, using a flathead screwdriver, go up and down the front and back panel of the cabinet popping out plugs now revealing the screw holes for the pilasters. After all the plugs have been removed, it's time to install the pilasters with the thumb screws. To determine which is which, make sure you check the first cut-outs for the trayslide inserts. The one with the smallest gap to the edge, that's the top. If the gap is bigger, that side goes on the bottom. There are two sets of pilasters: one set for the front left and back right, and one set for the front right and back left. After all the pilasters are installed, it's time to install the trayslides. Install the trayslides on one side from bottom to top. Once all the tray slides have been installed, you're done! Just double check to make sure the spacing is correct.

Copy and paste the embed code above.

Compare to Other Products

Overall Dimensions:
  • Width: 29 7/8"
  • Depth: 35"
  • Height: 83 1/4"
  • Capacity: 24.2 cu. ft.
Interior Dimensions:
  • Width: 24 7/8"
  • Depth: 27"
  • Height: 58 7/16"

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents: Prop 65 Warning

Traulsen G11010 Replacement Parts

View replacements or accessories for
Traulsen G11010

Resources and Downloads for
Traulsen G11010

Specsheet Specsheet Warranty Warranty Accessories G-Series Accessories Selection Guide Selection Guide

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

Note: Traulsen equipment has a 3 year parts and labor warranty. Traulsen compressors have a 5 year warranty. RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.

Resources

Traulsen G11010 Specs
Width 29 7/8 Inches
Depth 35 Inches
Height 83 7/16 Inches
Interior Width 24 7/8 Inches
Interior Depth 27 Inches
Interior Height 58 7/16 Inches
Amps 7.4 Amps
Hertz 60 Hertz
Phase 1
Voltage 115
Access Type Doors
Capacity 24.2 cu. ft.
Compressor Location Top Mounted
Construction Stainless Steel and Aluminum
Door Style Swing
Door Type Glass
Half Doors No
Horsepower 1/3 HP
Installation Type Freestanding
Made in America Yes
NSF Listed Yes
Number of Doors 1
Number of Shelves 3
Refrigerant Type R-450A
Sections 1
Temperature Range 34 - 38 Degrees F

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

  • Write a text review
    Earn $2.00
  • Post a product photo
    Earn $4.00
  • Post a product video
    Earn $10.00
Login or Register

Find Related Products

air curtain refrigerator   bar back refrigerator   countertop display refrigerator   low boy refrigerator   merchandiser refrigerator   open top refrigerator