ServIt Four Pan Open Well Electric Steam Table with Partially Enclosed Base - 208/240V, 3000W

While it is possible to run 240V equipment on a 208V connection, doing so will reduce wattage output by up to 25% and could potentially impact performance.

Yes, this unit requires some assembly. For more information, please refer to the manufacturer's product literature.

Open well tables can be used with spillage pans for moist heat holding, or without pans for dry heat holding of fried foods or other crispy items. This design allows the flexibility to have some of the wells using moist heat, and some of them using dry heat, at the same time. Open well tables do not have drains, so the spillage pans must be removed and emptied after service.

Sealed well tables do not need spillage pans; water is added directly to the well, and is emptied through a drain after service. However, sealed well tables should not be used for dry heat holding.

If you’re not sure which style is best for your needs, please contact Customer Solutions prior to placing your order!

The power cord is located underneath the unit, in the right rear corner.