- Spout Length:
- 12"
EXCELENTE PRECIO POR CALIDAD DE LO MEJOR EN CALIDAD Y PRECIO MUY RECOMENDADO
Regency Deck-Mounted Faucet with 8" Centers and 6" Swing Spout
Item number 600fd86
Works With
Special Order Shipping
An estimated delivery date will be provided after placing the order
Product Overview
- 6" swing spout with 2 GPM aerator
- 8" adjustable centers, 1/2" NPS inlets
- Temperature rating 40 - 140 degrees Fahrenheit
- Chrome-plated brass construction
- Leak-resistant quarter-turn ceramic cartridges with check valves
Shipping Restrictions
This item cannot ship to WA, OR, ME, CA, NY or HI
UPC Code:400018234709
This Regency deck-mounted faucet is the perfect solution when you need a dependable water fixture in your facility!
Perfect for busy commercial kitchens, Regency faucets provide the industry-leading quality you expect. With a chrome-plated brass faucet body and ceramic cartridges engineered for durability, you can install this model with confidence. It boasts a set of 8" adjustable centers, while the deck-mounted design is easy to install with 1/2" male NPS inlets.
CSA, US and Canada
This product is certified by CSA to applicable U.S. and Canadian standards.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.
NSF Certified
This item is certified by NSF to applicable standards.
Sturdy and Consistent
This faucet features a 6" long swing spout that moves easily around the sink bowl, while a 2 GPM aerator provides a consistent flow rate and minimal splashing. The sturdy lever handle design makes it easy to turn the water flow off and on.
Efficient Design
This faucet uses ceramic cartridges, which provide a much lower fail rate than the compression cartridges widely used in the industry. In this design, 2 ceramic discs fit together to create a watertight seal when closed. This removes the need for a rubber seat washer, which is one of the most frequently replaced parts on a faucet.
Questions & Answers
Looking For Specific Info? Get quick answers to product questions with our AI-powered search.
By using this AI-powered search, you agree to our Terms of UseOpens in new tab and Privacy PolicyOpens in new tab.
Frequently Asked Questions From Customers
Does this item have any additional agency approvals and certifications?
There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.
Does this item ship to Canada?
This product cannot be shipped to Canada.
What measurements do I need to install a faucet?
When installing a faucet, these are some of the most common measurements you’ll need:
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
What parts do I need to install my new faucet?
For both wall and deck mounted faucets, installation kits are sold separately. Check the Works With items to find the proper installation kits and parts!
Compare to Other Products
Price
Spout Length
Faucet Height
Faucet Centers
Flow Rate
Spout Type
Overall Dimensions:
- Spout Length:
- 6 Inches
- Faucet Height:
- 4 3/8 Inches
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
Attention CA Residents:Need Parts & Accessories?
Shop replacement parts and accessories for this item today!
Resources and Downloads
A PDF viewer is required to view this product's information. Download Adobe Acrobat softwareOpens in new tab
Customer Reviews
Frequently Mentioned
- calidad
- precio
- durable
- excelente
- faucet
- mejor
- por
- recomendado
- usage
- Spout Length:
- 18" Double-Jointed
The faucet is leaking after a few months of usage. It's not durable enough.
Thank you for your review, Darshan! We would like to gather more information about your experience with this faucet. A Customer Solutions Representative will contact you soon.