Quick Shipping
Usually ships in 1 business day
Product Overview
- 4" centers
- 6" swing spout
- 2.2 GPM aerator
- Cerama cartridges
- 1/2" NPT male inlets
- Lever handles
- Chrome plated brass body
Works With"Works With" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.
- Quantity
- 1/Each
- Shipping Weight
- 3.5 lb.
- Spout Length
- 6 Inches
- Faucet Width
- 8 5/8 Inches
- Faucet Height
- 6 1/8 Inches
- Cartridge Type
- Ceramic
- Faucet Centers
- 4 Inches
- Features
- ADA Compliant
- Finish
- Chrome
- Flow Rate
- 2.2 GPM
- Handle Type
- Lever
- Mounting Style
- Deck Mounted
- Mounting Type
- Workboard
- Rough In
- 4 Inches
- Spout Clearance
- 3 Inches
- Spout Type
- Swing
- Sprayer
- Without Sprayer
- Type
- Faucets
- Water Inlet Size
- 1/2 Inches
T&S Brass and Bronze Works B-1110-CR Details
This T&S B-1110-CR deck mounted workboard faucet is the perfect solution when you need a reliable water fixture in your facility. It boasts 4" centers while its 6" swing spout and 2.2 GPM aerator deliver extra-fast water flow in any application. Additionally, this faucet is engineered for maximum durability and uses Cerama cartridges to control the water flow. These cartridges contain ceramic discs that form a long-lasting water tight seal. When the lever handles of this faucet are turned, the discs spin to allow water to pass through. T&S cartridges are designed with efficiency and convenience in mind, allowing you to swap out one piece in the event of a leak, instead of replacing multiple moving parts.
Overall Dimensions:
Spout Length: 6"
Faucet Height: 6 1/8"
Faucet Width: 8 5/8"
Attention CA Residents:
ADA Compliant
This item meets criteria established by the Americans with Disabilities Act (ADA).
NSF/ANSI/CAN 61 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.
NSF/ANSI/CAN 372 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.
Questions & Answers
Looking For Specific Info?
Get quick answers to product questions with our AI-powered search.
Frequently Asked Questions From Customers
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Need Parts & Accessories?
Show replacement parts and accessories for T&S Brass and Bronze Works B-1110-CR today!
Resources and Downloads for
T&S Brass and Bronze Works B-1110-CR
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Resources
Related Items
Deck-Mount Faucets
717 Products
Faucet Nozzles
274 Products
Faucet Parts and Accessories
25 Categories
Drain Accessories
316 Products