$96.49/Each
Ships free with PlusProduct Overview
- Single hole base; 1/2" NPSM male inlet with 2" base flange
- 6" 059X swing nozzle with stream regulator
- Single lever handle with color coded index
- Cerama ceramic cartridge; can withstand water temperatures up to 180 degrees Fahrenheit
- 150A tailpiece and nut for 1/4" NPT connection included
- Chrome plated brass construction
Works With"Works With" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.
- Quantity
- 1/Each
- Shipping Weight
- 3.56 lb.
- Spout Length
- 6 Inches
- Faucet Width
- 3 1/4 Inches
- Faucet Height
- 8 11/16 Inches
- Cartridge Type
- Ceramic
- Faucet Centers
- Single
- Finish
- Chrome
- Flow Rate
- 4.06 GPM
- Handle Type
- Lever
- Material
- Brass
- Mounting Style
- Deck Mounted
- Mounting Type
- Adjustable
- Pressure Rating
- 20 - 125 PSI
- Rough In
- Single
- Spout Clearance
- 5 5/8 Inches
- Spout Type
- Swing
- Sprayer
- Without Sprayer
- Temperature Rating
- 40 - 180 Degrees F
- Type
- Faucets
- Water Inlet Size
- 1/2 Inches
T&S Brass and Bronze Works B-0207-CR Details
This T&S B-0207-CR deck mounted single hole pantry faucet features a 6" long swing nozzle that extends out and up for better clearance, with a stream regulator outlet to provide you with faster water flow and minimal backsplash. To make installation easy, it also boasts a 1/2" NPSM male inlet that fits into compatible water connections within your facility. A simple lever handle design with color-coded index makes it easy to turn the water on and off as needed, and will stand up to plenty of use over time. The included Cerama ceramic cartridge also provides excellent durability and leak-resistance since there is no seat washer, while using up to 20% less water than compression cartridges. This faucet also includes a 150A tailpiece set which allows it to be used with 1/4" NPT connections.
Overall Dimensions:
Spout Length: 6"
Faucet Height: 8 11/16"
Faucet Width: 3 1/4"
Customer questions about this product
Does this item have any additional agency approvals and certifications?
What measurements do I need to install a faucet?
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Made in America
This item was made in the United States of America.
ADA Compliant
This item meets criteria established by the Americans with Disabilities Act (ADA).
NSF Listed
This item has been certified by NSF International to meet applicable product standards on public safety, health, and / or the environment.
NSF/ANSI/CAN 61 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.
NSF/ANSI/CAN 372 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.
Resources and Downloads for
T&S Brass and Bronze Works B-0207-CR
A PDF viewer is required to view this product's information. Download Adobe Acrobat software