Verified Purchase
- Spout Length:
- 6 1/8"
This is very easy to assemble. It does look great at the sinks, especially for my prep sink . It's slim and it doesn't take up much space!!
Equip by T&S 5F-1SLX08 Single Supply Deck Mount Faucet with 8 1/8" Swivel Nozzle - ADA Compliant
Item number 5105f1slx08MFR number 5F-1SLX08
$65.49/Each
Ships free with
Quick Shipping
Usually ships in 1 business day
Estimated Shipping Time
Delivery time may vary depending on your location. Use the shipping calculator on the cart page to estimate arrival times by entering your zip code. If an order is time-sensitive, check with our customer service team.
Product Overview
- Equip lever handle
- 1/2" NPSM male connection
Shipping Restrictions
This item cannot ship to CA
UPC Code:671262593724
Works With
- Quantity
- 1/Each
- Shipping Weight
- 2.69 lb.
- Spout Length
- 8 1/8 Inches
- Faucet Width
- 2 3/8 Inches
- Faucet Height
- 8 3/8 Inches
- Cartridge Type
- Ceramic
- Faucet Centers
- Single
- Features
- ADA Compliant
- Finish
- Chrome
- Flow Rate
- 4.76 GPM
- Handle Type
- Lever
- Mounting Style
- Deck Mounted
- Mounting Type
- Adjustable
- Rough In
- Single
- Spout Clearance
- 6 Inches
- Spout Type
- Swing
- Sprayer
- Without Sprayer
- Temperature Rating
- 140 Degrees F
- Type
- Faucets
- Water Inlet Size
- 1/2 Inches
T&S Brass and Bronze Works 5F-1SLX08 Details
This ADA Compliant Equip by T&S 5F-1SLX08 single supply deck mount faucet comes complete with an 8 1/8" swivel nozzle, perfect for use in a variety of commercial kitchen and janitorial applications. It is designed to fit decks up to 1 1/8" thick (or 1 1/4" thick by removing the included washer). Each 5F-1SLX08 single supply deck mount faucet measures 8 3/8" in height by 8 1/8" wide.
Overall Dimensions:
Spout Length: 8 1/8"
Faucet Height: 8 3/8"
Faucet Width: 2 3/8"
Attention CA Residents:
CSA, Canada
This product has been certified by the Canadian Standards Association (CSA) to meet requirements for electrical, plumbing, and/or mechanical products in Canada.
ADA Compliant
This item meets criteria established by the Americans with Disabilities Act (ADA).
NSF/ANSI/CAN 61 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.
NSF/ANSI/CAN 372 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.
Questions & Answers
Looking For Specific Info? Get quick answers to product questions with our AI-powered search.
By using this AI-powered search, you agree to our Terms of Use and Privacy Policy.
Frequently Asked Questions From Customers
Does this item have any additional agency approvals and certifications?
There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.
What measurements do I need to install a faucet?
When installing a faucet, these are some of the most common measurements you’ll need:
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Resources and Downloads for
T&S Brass and Bronze Works 5F-1SLX08
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Resources
Customer Reviews
Frequently Mentioned
- sinks
- assemble
- easy
- especially
- great
- much
- prep
- sink
- slim
- space