$114.49/Each

Ships free with Plus
Due to a manufacturer's price increase, this price will increase by 5.00% on 01/01/25

Quick Shipping

Usually ships in 1 business day

Product Overview

  • Single hole base; 1/2" NPSM male inlet with 2" base flange
  • 12" 062X swing nozzle
  • Single lever handle with color coded index
  • 150A tailpiece and nut for 1/4" NPT connection included
  • Chrome plated brass construction
UPC Code:671262002165

Specs

Quantity
1/Each
Shipping Weight
3.96 lb.
Spout Length
12 Inches
Faucet Width
3 5/16 Inches
Faucet Height
10 11/16 Inches
Cartridge Type
Compression
Faucet Centers
Single
Features
Made in America
Finish
Chrome
Flow Rate
5.59 GPM
Handle Type
Lever
Mounting Style
Deck Mounted
Mounting Type
Adjustable
Rough In
Single
Spout Clearance
7 9/16 Inches
Spout Type
Swing
Sprayer
Without Sprayer
Temperature Rating
140 Degrees F
Water Inlet Size
1/2 Inches

Details

This T&S B-0206 deck mounted single hole pantry faucet features a 12" long swing nozzle that extends out and up for better clearance compared to straight nozzles. To make installation easy, it also boasts a 1/2" NPSM male inlet that fits into compatible water connections within your facility. A simple lever handle design with color-coded index makes it easy to turn the water on and off as needed, and will stand up to plenty of use over time. This faucet also includes a 150A tailpiece set which allows it to be used with 1/4" NPT connections.

Overall Dimensions:
Spout Length: 12"
Faucet Height: 10 11/16"
Faucet Width: 3 5/16"

Attention CA Residents:

Customer questions about this product

Does this item have any additional agency approvals and certifications?

There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.

What measurements do I need to install a faucet?

When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Ask your own question!
  • Made in America

    Made in America

    This item was made in the United States of America.

  • CSA, Canada

    CSA, Canada

    This product has been certified by the Canadian Standards Association (CSA) to meet requirements for electrical, plumbing, and/or mechanical products in Canada.

  • NSF/ANSI/CAN 61 (Certified by CSA)

    NSF/ANSI/CAN 61 (Certified by CSA)

    This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.

  • NSF/ANSI/CAN 372 (Certified by CSA)

    NSF/ANSI/CAN 372 (Certified by CSA)

    This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.

  • 1/2" Water Connection

    1/2" Water Connection

    This unit comes with a 1/2" water connection for water supply.

Resources and Downloads

A PDF viewer is required to view this product's information. Download Adobe Acrobat software