Mix & Match Discounts
Quantity Discounts


Ships free with Plus
Buy 1 - 4 $129.99/Each

Other Available Sizes:

  • Features a 16-gauge stainless steel top
  • 18-gauge type 430 stainless steel undershelf and legs
  • 700 lb. top shelf weight capacity; 540 lb. undershelf weight capacity
  • 2" high edging contains equipment and supplies
  • Increases work space
  • Easy-to-assemble
  • Great for busy commercial kitchens

Quality Rating:




Usually Ships in 1 Business Day
When will I receive my item?

You May Also Need

"You May Also Need" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.

For added work space and organization, choose this Regency 24" x 24" stainless steel equipment stand!

Built for daily use, this stand is a great addition to your busy commercial kitchen. When space is limited, this durable stand allows you to increase your counterspace without cutting back on the variety of equipment in your kitchen. Plus, additional storage space promotes an organized and efficient work environment!

  • NSF Listed

    NSF Listed

    This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

Durable, Stainless Steel Top

With a 16-gauge stainless steel top, this stand can support up to 700 lb. of evenly distributed weight. Great for holding a variety of equipment including mixers, slicers, and counter top ranges, you can increase your work space by adding this stand to your kitchen. The stainless steel material is easy to maintain and can be wiped clean at the end of the day.

Stainless Steel Undershelf

The 18-gauge type 430 stainless steel undershelf can hold up to 540 lb. for storing additional equipment and supplies.

2" Edging

For added security, a 2" edging comes standard to help keep equipment and other contents from sliding off and becoming damaged.

Adjustable Bullet Feet

Adjustable stainless steel bullet feet allow you to level your stand on uneven surfaces for the best possible stability.

Stainless Steel Legs

The legs of this Regency stand are also constructed of durable, easy-to-clean stainless steel to provide commercial-grade toughness.

Ships Unassembled

This stand ships unassembled to save you on shipping costs. An allen wrench and two set screws are included for easy assembly.

How to Assemble a Stainless Steel Equipment Stand

In this video, learn how to assemble your Regency stainless steel equipment stands! Also, how to adjust the height of the stands and how to add casters to them! Check it out!

Our Regency stainless steel equipment stands are a great choice to hold the counter top equipment on your cooking line. These stands are shipped to you unassembled in order to save you money on shipping. Today I’ll show you how easy it is to assemble these Regency equipment stands. First let’s take a look at the parts that come inside your box. You have the equipment stand top and you’ll see it has a 2 inch splash on three sides to keep your equipment from slipping off the stand. You have an under shelf, four legs and you’ll find a bag in the box with your legs that contains an Allen wrench and two extra set screws. The rest of the set screws are already screwed into where they belong. Note the protective film on the top of the stand and the under shelf. I recommend that you leave this on the stand until you’re finished assembling, that way you prevent scratching and scuffing. And keep in mind that especially with larger stands, having a helper can really come in handy. To assemble, first place the equipment stand top upside down on a surface that won’t scratch it. Here I’m using the cardboard box it arrived in. Next, place the four legs in the tabletop gussets. If one has trouble going in, you may have to give it a few turns to the set screws to loosen them. Now, tighten the set screws. At this point, I don’t tighten them quite all the way since I like a little bit of play when I’m adding the under shelf. To add the under shelf, which not only gives the stand extra storage but also stability, you’ll first want to decide what height you’ll want it and then mark that height on all four legs. In any food service application you’ll want that height o be at least 6 inches off the ground for food safety reasons. Once marked, slipped the under shelf onto the legs to the proper position. Work your way around and tighten the two set screws for each leg. Now tighten the set screws at the tops of the legs. The equipment stand assembly is almost finished, but before I flip it right side up I wanted to show you the adjustable feed on these equipment stands. Whether you’re putting the table on an uneven surface, or just need to raise it or lower it you’ll appreciate that simply by turning the foot you can adjust the height by up to an inch and a quarter. Do you need casters for you equipment stand? Use our cut down feature in order to both shorten the stand to allow for casters and to buy the casters themselves. Thank you for watching, and if you have any questions please feel free to use our live chat button.

Copy and paste the embed code above.

Compare to Other Products

Overall Dimensions:
  • Length: 24 Inches
  • Width: 24 Inches
  • Height: 26 Inches
  • Work Surface Height: 24 Inches
  • Backsplash Height: 2 Inches
Shelf Capacity:
  • Top Shelf: 700 lb.
  • Undershelf: 540 lb.

WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

Resources and Downloads

Spec Sheet Specsheet Warranty Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Customer Reviews

  • Overall User Rating: Regency 24" x 24" 16-Gauge Stainless Steel Equipment Stand With Undershelf

    4.9 stars from 10 reviews


    People Talk About:

    easy equipment great quality table Regency assemble mixer price recommend

    So far so good we bought this workshop to go with an invent code charbroiler that we purchased the quality seems just fine he came in a flat box and it was very easy to put together. And we put it together in about 10 minutes and although it's late we give more than a holes are 24 inch charbroiler.

    from Ventnor Posted on

    Very easy to assemble and sturdy table. We have our 20qt mixer on it and it holds it well, it doesn't shake and it the perfect height for what I need!!!

    from The Cake Girl Posted on

    Regency is one the best stainless steel table makers in the industry I would buy and recommend these products to all my family and friends

    from Jack hermiz Posted on

    This table provides a great work space in our coffee shop. The shelf is convenient for easily accessible storage. Construction is very sturdy and it's easy to move.

    from Marie and Twannette's Bakery and Cafe Posted on

    Regency 24" x 24" 16 Gauge Stainless Steel Equipment stand is built of high quality stainless steel and easy to mount. This unit is great for 16 - 18 inch in depth pieces of cooking equipment.

    from Hurricane Concessions & Rentals, LLC Posted on

    Very easy to assemble. Easy to clean and I love the added shelf at the bottom for extra storage space! I use this table to hold all of my knick knack things.

    from Good Doggy Posted on

    Very easy to assemble, sturdy table. We use it to hold a heavy equipment and does not shake or wobble. Would recommend getting casters to go with it. Great quality, recommend.

    Posted on

    All of the Regency equipment stands, work tables, and sinks I have purchased from Webstaurant have exceeded my expectations for value. I have purchased some more expensive brands when Regency didn't have a size or style I needed and you can barely tell the difference in quality or assembly--only in price!


    No need to buy an expensive equipment stand when this one does the job just fine for a fraction of the price! We use this for our 20qt stand mixer and haven't had a single issue with it so far!

    Posted on

    This is a great item quality and price is great. My bakery has these for the preparation of bagels and also for the 20 quart mixer.

    from antojitos latinos Posted on

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register