$3,503.37/Each

for details

Ships free with Plus

  • 24 gauge painted, textured galvanized steel interior and exterior
  • Full-height self-closing sliding doors with double pane safety glass
  • Foamed-in-place polyurethane insulation for greater structural strength and energy retention
  • Adjustable legs allow for easy leveling
  • LED interior lighting for better product visibility; 8 heavy-duty epoxy-coated adjustable shelves
  • Electronic digital thermostat; holds temperatures at 34-41 degrees Fahrenheit
  • Self-contained bottom mount 1/3 hp refrigeration system with R-134a refrigerant
  • 115V
Shipping: Usually Ships in 4-5 Weeks
Master-Bilt Reach-In Merchandisers: Adjusting Door Tension

Master-Bilt Reach-In Merchandisers: Adjusting Door Tension

One of the common problems that occurs with glass reach-in door cabinets is an issue with door tensioning. Sometimes in shipping, doors can lose their tension. It's important at setup to check all the doors to make sure they have proper tension. Even after they've been in place for some time, if you start getting reports of doors that are standing open or especially if you have icing on the evaporator coils, it's difficult to diagnose. It can very well be caused by something like this. If you close one of the doors of a cabinet, especially a 3 or 4 door cabinet, it will cause one of the tension doors to pop open and relieve the compressed air pressure. You can see that this door has no tension. It will not close. If it stands open long enough, it's going to pull in humid air and create coil icing. The key here is to set tension on this little device at the bottom of the hinge side of the door. You see, with a flat blade screwdriver, we can adjust tension and we want to adjust until that door starts to move and actually closes. Once you get the door to self close from that open position by, in this case turning counter-clockwise, give it about another turn and then test the setting by pulling the door open 6 inches and releasing. If the door will self close on a well-leveled cabinet from 6 inches of open, it has got sufficient tension. You don't want to over tension because that shortens the life of door tensioning rod or can cause it to break.

Copy and paste the embed code above.

Ensure your Master-Bilt reach-in merchandiser doors have sufficient tension by following these easy steps!

Master-Bilt BMG-48-SLP Specs
Width 52 Inches
Depth 31 Inches
Height 79 Inches
Interior Width 48 1/2 Inches
Interior Depth 24 1/2 Inches
Interior Height 62 Inches
Amps 6.9 Amps
Hertz 60 Hertz
Phase 1 Phase
Voltage 115 Volts
Access Type Doors
Capacity 45.7 cu. ft.
Color White
Compressor Location Bottom Mounted
Door Style Sliding
Door Type Glass
Energy Star Qualified Yes
Features LED Lighting
Half Doors No
Horsepower 1/3 HP
Installation Type Freestanding
Made in America Yes
Number of Doors 2
Number of Shelves 8
Refrigerant Type R-134A
Sections 2
Temperature Range 34 - 41 Degrees F

Master-Bilt BMG-48-SLP Details

Perfect for displaying the most popular cold grab-and-go items at your convenience store, market, or deli, this Master Bilt BMG-48-SLP bottom mounted sliding glass door merchandiser refrigerator is an essential piece of equipment for boosting impulse sales. The unit's full-height design and double pane sliding glass doors allow for maximum product visibility and storage, while the contemporary white exterior and white interior provide an attractive product showcase. Plus, the LED interior lighting is cooler and highlights your products better compared to fluorescent lighting.

A 24 gauge painted and textured galvanized steel interior and exterior add extended durability. The floor is also constructed of stainless steel, which helps protect the self-contained, bottom mount refrigeration system. Two full-size doors boast an auto-close feature to increase convenience while simultaneously conserving energy. For further ease of use, a total of eight adjustable heavy-duty epoxy-coated cantilever shelves are included and come with price tag molding built-in so that you can easily display pricing for your most frequently purchased products.

The unit uses R-134a refrigerant and has an interior that is insulated with 1 3/4" foamed-in-place "zero ODP" polyurethane, ensuring your food items are stored at food safe temperatures between 34 and 41 degrees Fahrenheit. Adjustable legs for leveling and an easy-access electronic thermostat combine to ensure the unit is one that's perfectly customized for your operation. Other features include easily replaceable snap-in magnetic vinyl door gaskets and a top-mounted, low profile interior evaporator housing.

This merchandiser requires a 115V electrical connection.

Overall Dimensions:
Width: 52"
Depth: 31"
Height: 79"

Interior Dimensions:
Width: 48 1/2"
Depth: 24 1/2"
Height: 62"
Capacity: 45.7 cu. ft.

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents: Prop 65 Warning

  • Made in America

    Made in America

    This item was made in the United States of America.

  • Energy Star Qualified

    Energy Star Qualified

    This item has been Energy Star Qualified by the US Environmental Protection Agency and the US Department of Energy, making it an energy-efficient product.

  • UL Classified EPH

    UL Classified EPH

    This product complies with UL EPH standards and meets ANSI/NSF requirements.

  • UL US & Canada

    UL US & Canada

    This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL) for use in the United States of America and Canada.

  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

Resources and Downloads for
Master-Bilt BMG-48-SLP

Spec Sheet Specsheet Manual Manual Warranty Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.

Leave a review of this product!

If you've used this product, log in and leave a review to tell us and other customers what you thought about it. Get paid up to $16 for submitting one of the first text, photo, or video reviews for this item. View your account for details.

Login or Register

Find Related Products