• Free Shipping!  

or enter your email to be instantly sent the price!

Why do we do this?

One of our friendly Customer Service reps will be happy to give you the price for this item! Start a Live Chat
Mon-Thur 24 Hours, Fri 12AM-8PM EST
Sat & Sun: 9AM-4PM EST.

Other Available Colors:

  • Locks door and displays error if cabinet remains above 41 degrees Fahrenheit for 30 minutes
  • Peel and chip-resistant laminated vinyl exterior; white aluminum interior with stainless steel floor
  • Double pane right hinged, self-closing, thermal glass door reduces energy loss
  • Bright, long-lasting LED lighting shows off product
  • Environmentally-friendly R290 hydrocarbon refrigerant
  • Includes 5 heavy-duty adjustable PVC-coated shelves
  • New rounded, door handles
  • 1/3 hp; 115V

UPC Code:




Special Order

Some items on our website are not normally stocked in our warehouses. These items are marked "Special Order" underneath the price on the item's page.

Please understand that Special Order items may not be able to ship within 1 business day like our regularly-stocked items.Some may be shipped directly from the manufacturer. Others might have to be ordered into our warehouse with the next order from that manufacturer and then shipped to you; this could take up to several weeks.

As a result, we urge you to contact us if you have questions about the delivery time of a Special Order item you wish to order.

Please note - we are not always able to cancel special order items once the order is placed. These items may also be non-returnable. Please contact us if you have any questions before ordering this item.

Not Eligible for Expedited Shipping

White Glove Delivery - Available -

What is White Glove service?

Standard common carrier delivery options cover the cost of getting an item to your shipping address but our White Glove delivery service does that and more!

The White Glove agent will call to schedule a delivery appointment within a four hour window, which gives you the flexibility to work around your busy schedule and to prepare the space where your item will be placed. Upon delivery, trained professionals will unload your item from the truck, bring it into the room of choice, unpack the item and remove all packaging debris from the premises.

Please note that White Glove delivery will typically add 5 - 7 business days to your order's transit, and only includes 30 minutes of on-site time. If on-site time beyond 30 minutes is required, you may be responsible for additional fees. Additionally, this service does not include set-up of the items being delivered.

True Glass Door Merchandiser Refrigerators

True Glass Door Merchandiser Refrigerators

True's GDM glass door merchandiser refrigerators come in a variety of shapes and sizes, including one, two, and three sections. Another option is swing or slide doors. Made with high quality metals, GDM refrigerators have a non-peel or chip laminated vinyl exterior available in white, black, or stainless with an up-charge. The self-closing doors are made of low-E double pane thermal insulated glass, keeping energy costs at a minimum. The doors are also equipped with easily removable door gaskets. True's in-house printing capabilities leave you with many choices for signage on GDM refrigerators from illuminated sign panels to sidewall decals. On the interior of a GDM refrigerator, you will find fluorescent integrated door lighting, which reflects off the NSF approved white aluminum walls. A LED lighting option is available with an up-charge. The floor of the cabinet is constructed of stainless steel. GDM refrigerators come with four adjustable heavy duty PVC coated wire shelves per section. The entire cabinet is foamed in place using Eco-mate, an environmentally friendly insulation offering zero ozone depletion potential and zero global warming potential. The GDM refrigerator's bottom mount design has many advantages. With the condensing unit on the bottom, it provides easy access for maintenance, top storage, and a no stoop lower shelf. Many of the GDM refrigerators are Energy Star approved, and all have an oversized and balanced refrigeration system that ensures faster temperature recovery and shorter run times in the busiest of foodservice environments. Many accessories are available for GDM refrigerators. Please contact your local foodservice equipment provider for more information. Certain features and benefits may vary by country or location. True's GDM refrigerators.

Copy and paste the embed code above.

Learn the ins and outs of True's GDM merchandiser refrigerators!

How to Clean Your True Refrigeration Condenser

How to Clean Your True Refrigeration Condenser

This instructional video shows the proper way to clean the condenser of T-series cabinet. Tools required for this task include: Phillips screw driver, stiff bristle brush, air tank or CO2, vacuum cleaner and a flashlight. Step one; disconnect the power to the unit. Step two; take off the louver grill assembly by opening the door and removing the screws from the top of the louverr grill. Step three; clean out the accumulated dirt from the condenser coil and fan with the stiff bristle brush. Remember to bush up and down the coil, never side to side as this could bend the fins on the coil. Step four; after brushing the condenser coil, vacuum the dirt from the coil. Again, moving the vacuum up and down on the coil and never side to side as this could bend the fins on the coil. You may use compressed air or CO2 to clean the condenser as well, just remember to vacuum the dirt off the floor and the back side of the condenser to prevent it from being sucked up into the coil. Finally, use a flashlight to shine through the condenser. You should now be able to see the light on the other end, meaning the condenser’s now free of debris. Step five; re install the assembly onto the unit with the appropriate fasteners. Step six; connect the unit to the power and check to see if the compressor is running. A recommended rule is to check the condenser coil every month for the first 3 months of use. This will tell you how dirty your environment is. Generally, you should be cleaning your condenser coil every 60-90 days depending on the environment in which it is used. Never use filters in any shape or form as these instantly block air flow and do not allow the unit to run properly.

Copy and paste the embed code above.

Be sure to check out this video to learn how to clean your condenser on your True refrigerator! Step-by-step instructions are given on how to properly clean your condenser, and how to figure out how often you should be cleaning it.

How to Install Side and Front Door Decals on a True GDM

How to Install Side and Front Door Decals on a True GDM

In this video, we will be demonstrating how to install a side decal and front door decal on a glass door merchandiser. First, we will demonstrate how to install a side wall decal. The tools you will need for this task include: masking tape, a squeegee, and the desired decal. You will line up the decal with the top edges and use the masking tape to hold the decal in place. Adjust the tape to align the edges with the top, bottom, and sides. Once aligned, pull the backing off the top of the decal. Fold the backing flat against the cabinet and stick the decal to the top two corners. Secure the top with pressure from the squeegee by moving side to side. Then, remove the masking tape. Grab the backing from the center of the decal and pull down slowly as you squeegee the decal by moving side to side. As you get to the bottom of the decal, Move the squeegee downward to avoid creasing. In the event of creasing, make sure to stop and run the squeegee across the crease and not downward. Pull up on the decal to re-secure if needed. Check over the decal with the squeegee and remove any air pockets. Once all air pockets have been removed, the installation is complete. Next, we will show how to install a front door decal. The tools you will need for this task include: glass cleaner, a squeegee, and the desired decal. Trim any excess of the decal if needed. Before starting, do a "test fit" to make sure that the decal will fit inside the door. Use glass cleaner to clean the window and remove any dust or debris. Then, peel the backing off and spray the glass cleaner where the decal will be placed. You may also spray the cleaner on the back of the decal. Match the corners one at a time and make sure to center and level it. Squeegee the decal lightly in order to set it. Then, look to the front to make sure that the decal is positioned correctly. Squeegee from under the trim downward from the top to complete. Squeegee out any air pockets. For any questions, contact True at 1-800-325-6152.

Copy and paste the embed code above.

Install side and front door decals on your True glass door merchandiser with these easy-to-follow steps! All you need is masking tape, glass cleaner, a squeegee, and your desired decals.

True Hydrocarbon Refrigerant

True Hydrocarbon Refrigerant

With growing concerns of the atmosphere taking on more and more hazardous emissions, True looks to be a part of the solution in practicing responsible manufacturing. Hydrocarbon refrigeration is the next step towards better refrigeration and environmental responsibility. Hydrocarbon refrigeration is not new. It has been around for decades and is widely used throughout the world. At least 40 percent of global household refrigerator production now employs hydrocarbon refrigerant. In 2011, the EPA approved hydrocarbon for use in the U.S. and it became a real choice as a natural refrigerant. The government has gone even further to initiate a ban on hydrofluorocarbons and setting energy regulations as early as the year 2019. True was recently recognized at the White House for its support and leadership in committing to reduce emissions of HFC's. With these changes in place, we now have 1.5-1.8 billion domestic hydrocarbon refrigerators and freezers in operation. The environmental impact is the real driving force behind the change. Hydrocarbon, or R-290 refrigerant, has a substantial benefit to the environment as it has a low global warming potential of 3 and 0 ozone depletion potential. The EPA has initiated the de-listing of refrigerants R134a and R404A. Hydrocarbon refrigeration is safe through regulation and charge limitations. Stores are filled with items containing propane and other flammable gases, and we use many safely in our every day life. As you can see, our coolers actually contain less propane than many everyday products. Our coolers have also seen an improvement in efficiency as seen in this chart, which will help us meet future regulatory requirements. In our labs, cabinets go through rigorous testing. With hydrocarbon refrigerants, this is no exception. To comply with regulatory safety standards across the globe, we have conducted various tests on our hydrocarbon cabinets. Our cabinets have always stayed within the non-flammable levels as very little refrigerant is actually needed to operate each unit. We at True want to make a difference. True has spent years developing hydrocarbon refrigeration and we are ready. Hydrocarbon cabinets are now on production and like all True coolers, careful inspection and quality control throughout the manufacturing process achieves top quality equipment for our users. The final step in the process is the charging with our natural refrigerant, hydrocarbon. Once charged, the cabinet is sent down the line and ready to be packaged. True is proud to be producing a more efficient and environmentally-friendly product. As we look into the future, we continue to look for better innovations that make us the best manufacturer of refrigeration in the industry. Please join us in this journey towards a more sustainable future.

Copy and paste the embed code above.

With environmental concerns on the rise, True refrigeration is taking the necessary steps to prepare for the future. Check out this video to learn more about hydrocarbon refrigeration and its impact on the world around us.

True R-290 Refrigerant Optional Charging Method

True R-290 Refrigerant Optional Charging Method

This video will show you one of the ways to properly charge a R-290 system. Before charging, you must make sure the refrigerant you are using is refrigerant grade R-290 propane and not standard propane that would be used for a gas grill. In this video this system has already been repaired, and the dryer has been replaced. Before you begin any hydro-carbon refrigeration repairs, it is recommended that the repair is done in a well ventilated area, all ignition sources have been extinguished, the HC leak detector is turned on for the whole duration of the repair, and the safety placard is in the area where the repair is being made. After your vacuum has been pulled to 500 microns, shut off the valves at the low side process and high side process tubes. And then shut off the valve at the vacuum pump. Remove the hose from the vacuum pump, and set the 1 lb. tank of R-290 on its side and onto the scale. Connect the charging hose to the tank's adapter, and open the tank's valve. Then bleed the hose connection. Place something heavy on the charging hose so that if the hose gets pulled, it will not affect the scale. Open the charging hose at the tank. Zero out the scale. At the high side valve, open the valve, and then close it when the desired charge has been weighed in. If the high side did not fully charge, start the compressor and open the low side valve to finish the charge. Then, close the valve, and leave the valves closed. Before removing the hose, pinch off the process line. Remove the hoses and the valves. Use the bubble solution to make sure that the pinch-off tool is tight enough and that no refrigeration is leaking out. Braise the line closed. Repeat for the other process line. You can bend any remaining charges in the hoses. Make sure to do this away from any ignition source and in a well ventilated area. For any questions, please contact True's Technical Service Department at 1-855-372-1368.

Copy and paste the embed code above.

Maintain your environmentally-friendly, R-290 refrigeration equipment to help promote durability and longevity! By charging the refrigeration system yourself, you can save both time and money while ensuring that your equipment is in tip-top shape.

True R-290 Refrigerant Service Training

True R-290 Refrigerant Service Training

R-290 Repair Training

The goal of this video is to show you safely and correctly how to make a repair on any cabinet produced with R-290 refrigerant. The first thing to consider is, how do I identify the cabinet I'm working on uses R-290 refrigerant? All R-290 equipment is required to have special labeling throughout the cabinet. Besides the serial tag label, you'll see several labels on the cabinet interior and the back of the cabinet. Additionally, the condensing unit will have several labels on it. It is also required that all R-290 equipment have red sleeves over the refrigerant line process tubes.

Now that you've properly identified the cabinet as using R-290 refrigerant, also be aware that the cabinet was manufactured to meet specific UL guidelines and standards that pertain to R-290 refrigerant; because of this True requires any part used for the repair to be an OEM part. For any reason you receive a replacement part that is not exactly the same as the part you are replacing, stop and call True before continuing. All the fan motors have a sealed shaft. All the relay and temperature controls have sealed contacts. The wire connectors that we use require a certain amount of force to pull the wires out of the connectors, which eliminates any spark potential. Wire nuts and crimp type connectors do not meet this requirement, therefore, they should never be used in any R-290 cabinet.

For all refrigeration repairs, you're still required to follow good refrigeration practices. Standard refrigeration tools will still be required including oxygen free dry nitrogen, a micron gauge, and shut off valve for your charging hose. In addition to these tools, you should also use as short of a refrigerant hose, as possible, as well as a pinch off tool. Now let's focus on the additional specialized tools that will be required for R-290 service. You will need a combustible gas leak detector, the safety placard, use only R-290 refrigerant. If you're using the 1 lb. cylinder supply by True, you will also need to use the specialized charging valve. These are the only specialized tools needed to service an R-290 system. True offers these parts individually or as part of several types of R-290 repair kits. Please contact True's parts department for pricing and availability.

The following procedure should be followed when doing any type of refrigeration repair. True requires the following good refrigeration practices, these should practices should include, but are not limited to: not leaving the refrigeration system open to the atmosphere for more than 15 minutes, always change the dryer whenever the refrigeration system has been opened, use a micron gauge, and pull a vacuum to a minimum of 500 microns. The introduction to the refrigeration system of anything other than a flushing agent, nitrogen, R-290, or refrigerant oil is prohibited. All refrigeration repair should be made in a well ventilated area. The repair we are going to show is replacing a condensing unit on an R-290 system that was previously diagnosed with a locked-up compressor.

Our R-290 repair starts with a service technician turning on his combustible gas leak detector and leaving it on throughout the unit repair. When you turn on the combustible gas leak detector it will have to self-calibrate, this will take about a minute. Once the high-pitch beeping levels off, you can continue. Do not proceed with the repair until the meter levels off. Put on your safety glasses. The technician should then display the safety placard in the area he will be making the repair in. Disconnect the unit you're repairing from any power source. The service technician will then need to install temporary piercing valves to allow access to the refrigeration system. To do this, you may need to trim a portion of the required red identifying sleeves back and place the temporary valves as close to the crimp on the end of the process tube, as possible. The combustible gas leak detector may go off during this process. Once the high-pitch beeping levels off, you can proceed.

After the temporary valves have been placed on the suction and discharge process tubes on an R-290 system, the technician will have to install his manifold gauge set with a short of hoses as possible on each of the temporary valves. Once again, the combustible gas leak detector may briefly go off. Wait for your meter to level off, then proceed with the repair. To remove the refrigerant from the system, you can open up both the high and low side lines and release the refrigerant slowly into the atmosphere. Doing this will more than likely set the combustible gas meter off. You should immediately shut off both valves on your manifold and allow any release R-290 refrigerant to dissipate in the atmosphere. Once the combustible gas meter levels off, you can continue to release R-290 refrigerant, repeating this process until all the refrigerant has been released from the refrigeration system. Once the refrigerant is out of the system, the technician must use a tubing cutter to cut out any failed refrigeration component. The reason for this is to prevent any possible spread of contamination and for the overall safety factor. For this example, the technician will cut the compressor pull out right where it brazes into the compressor. He would then cut the liquid line as it exists the dryer. If the technician is replacing the compressor, he would cut the compressor discharge line right as it exits the compressor instead of the liquid line as it exits the dryer.

Once the condensing unit has been removed, you will set the new condensing unit into place. Before pulling the plugs out of the compressor ports, be sure all of your refrigeration lines have been cleaned, pre-fitted, and are ready to be installed. This will minimize the amount of time the refrigeration system is open, which reduces the potential for any moisture to be absorbed into the compressor oil. When brazing on an R-290 system, you must always purchase oxygen free dry nitrogen through the system for a minimum of two minutes before and during brazing. We recommend you set the nitrogen regulator between 3-5 psig. Start to purge the nitrogen through the high side process tube, allowing it to exit out the suction process tube. You can now start to braze all of the joints.

Once all brazing is done and the solder joints have cooled, pressurize the system with no more than 200 psig of oxygen free dry nitrogen to leak check. Once we know that there are no leaks, you're ready to evacuate the refrigeration system. Release the nitrogen charge down to about 2 lbs. of nitrogen pressure to ensure that no outside air is being drawn into the refrigeration system. Connect your charge hose to your micron gauge, that should have already been connected to your vacuum pump. Start pulling a vacuum as soon as possible to help remove any moisture from the system. Continue to pull a vacuum until you reach a minimum of 500 microns. Once you reach 500 microns, you will want to close off the shut off valve on the charging hose as well as the high and low side lines on your manifold gauges. Remove the charging hose going to your micron gauge. Place the adapter valve on the 1 lb. R-290 cylinder. Be sure to leave the R-290 cylinder in its box. Then attach a charging hose to the R-290 adapter valve, place the cylinder in the box on its side on the charging scale. Open up the tank valve, then bleed the charging hose. We recommend placing something heavy on top of your charging hose so that if the hose gets pulled, it will not affect the scale. Zero out the scale. Open up the shut off valve on the charging hose. R-290 can be added as a liquid or a vapor. Open up the high side valve until the desired charge has been weighed in, then close the valve. If the system didn't take it's full charge, close the high side valve and start the compressor and allow it to run for a minute. Then slowly open the low side valve until fully charged. Once the system is fully charged, close the adapter valve on the R-290 cylinder as well as the shut off valve on the charging hose. Allow the unit to run to verify operation.

It is now time to remove both your hoses and temporary access valves. True requires the removal of any access valves on any refrigeration system. The next step would be to remove the refrigerant that is trapped in the high side hose to assure that we have proper charge in the unit. To do this, pinch off the high side process tube in front of the access port. Next, you want to open up the high side valve, then slowly open the low side manifold valve to draw all the refrigerant out of the high side hose. Once the pressures have equalized, you can close the high and low side manifolds. Using a tubing cutter, cut the high side process line in front of the temporary access valve, behind the pinch off tool. This could cause the combustible leak detector to go off. Wait for the combustible gas leak detector to level off before moving on. Be sure to crimp the end of the copper tube down, so that it will make it easier to weld. Test the end of the line with the bubble to make sure it's not leaking. Once the combustible gas leak detector levels off, you're ready to braze the end of the process tube shut. Once the process tube cools down, remove the pinch off tool and thoroughly leak check with soap bubbles. Now you can repeat these steps for the low side process tube. Once the final repair's completed, if the red identifying process tube sleeves have been removed, they must be reinstalled once the process tubes have cooled down.

If you have any questions prior to working on an R-290 system, stop and contact True's technical service department at 1-855-372-1368 or 1-800-325-6152.

Copy and paste the embed code above.

Are you curious about how to properly repair your True R-290 refrigerant system? Check out this informative how-to video for an in-depth look on the service process.

True R290 vs. R-134A Servicing Differences

True R290 vs. R-134A Servicing Differences

This video will show you that there are very few changes in making a refrigeration repair on an R290 HC system versus a R-134A/404A refrigeration system. When working on a hydrocarbon R290 system, make sure you are using refrigerant-grade R290 propane and not standard propane. Let's first focus on the tools. These are hte specialized tools to service an HC system. A leak detector designed to detect propane, these are readily available on the market. However, we also stock these through our parts department. The safety placard, R290 refrigerant, and the optional recovery tank. Next are the tools common to both refrigeration system repairs. And lastly, tools for servicing R-134A or 404A which includes a recovery machine, tank, and 134A/404A refrigerant. The recovery tank and machine are not required for HC repair. Now lets show the differences in making the refrigeration repair. The repair we are going to show is replacing a condensing unit on an HC system. The first step in making any repair on an HC or 134A/404A system is to correctly diagnose the failure. We are starting with the knowledge that the service technician has already diagnosed a failed compressor. Our HC repair starts with the service technician placing the safety placard in the area he will be making the repair. Then, you will turn on the leak detector or gas meter. The next steps to replace the compressor are the same, whether you're changing an HC or a 134A/404A compressor. The service technician will install piercing valves to allow access to the refrigeration system. After the valves have been placed on the suction and discharge process tubes on an HC system, the technician can vent the refrigerant directly into the atmosphere. On a 134A/404A system, the technician must recover the refrigerant in the system. Once the refrigerant is out of either system, the technician will cut the compressor pull-out right where it braises into the compressor. If the technician is replacing the condensing unit, as he is in this repair, he will then cut the liquid line as it exits the dryer. If he is replacing the compressor, he will cut the compressor discharge line right as it exits the compressor. Once the compressor has been removed, you will install the replacement compressor. This is done by cleaning the tubing ends and fitting them to the new compressor. The next step on an HC system is to set up the nitrogen tank to circulate oxygen-free, dry nitrogen through the system. We recommend you set the nitrogen regulator between 3-5 PSI and purge nitrogen through the system for a minimum of 2 minutes before you start to braise. We suggest you continue to circulate nitrogen through the system the entire time you are braising. This is a step that many seasoned service technicians do no matter what type of system they are working on. We set the nitrogen up to start to circulate through the discharge process tube and exhaust out of the suction process port on the compressor. In this video, we have a process tube in that does not have a shredder valve core on it so we have let the suction gauge hose off the system for the nitrogen to escape. If the fitting had a valve stem, you would have to connect the hose to allow the nitrogen to escape. Once the compressor is braised into the system, all of the following steps are the same you would take if you were replacing a compressor in a 134A/404A compressor. For any questions please contact True's technical service department at 1-855-372-1368.

Copy and paste the embed code above.

This video gives you helpful step-by-step instructions regarding the proper techniques for servicing various refrigerant systems. Whether you have a unit that runs on R290 or R-134A/404A, this video will assist you.

Width 30 Inches
Depth 35 Inches
Height 78 5/8 Inches
Hertz 60
Phase 1
Voltage 115 Volts
Access Type Doors
Color White
Compressor Location Bottom Mounted
Door Style Swing
Door Type Glass
Energy Star Qualified Yes
Features LED Lighting
Hinge Location Right
Horsepower 1/3 HP
Installation Type Freestanding
Made in America Yes
NSF Listed Yes
Number of Doors 1
Number of Shelves 5
Pass-Through No
Sections 1
Split Doors No
Temperature Range 33 - 38 Degrees F

Customer questions about this product

Are there other graphics available for this merchandiser's lighted sign?
Alternate graphics for this unit can be specified by contacting a member of our Customer Solutions team. Please note that additional processing time may be necessary.
I haven’t heard of R290, R600a, or R513a refrigerant before. What is it?
R290 (also known as high purity propane or CARE 40) and R600a (also known as refrigerant grade Isobutane or CARE 10) are hydrocarbon refrigerants. R513a (also known as Opteon XP10) is an HFO (hydrofluoroolefin) refrigerant. They are being used as an eco-friendly refrigerant by some manufacturers in response to the EPA’s Significant New Alternatives Policy (SNAP) Program. Read more about this program in our blog post on Refrigerant Regulations.
Ask your own question!


Attractively display merchandise and encourage impulse sales of cold drinks, sandwiches, and other to-go items with the True GDM-26-HST-HC~TSL01 white refrigerated glass door merchandiser! Featuring bright and even LED lighting, this refrigerator showcases your products more vividly than a unit with fluorescent lighting. The easily replaceable, energy-efficient LEDs generate less heat than fluorescent bulbs to keep internal temperatures low, and because they last significantly longer than other lights, you'll save money on replacement costs over time.

Designed for optimum food safety, this True merchandiser comes equipped with a health safety timer that prevents customers from purchasing food that may have been displayed at unsafe temperatures. This feature senses the cabinet temperature and if it exceeds 41 degrees Fahrenheit for 30 minutes or longer the door will lock, the display will indicate "HST LCK", and the controller will beep until it is shut off. A battery backup supply ensures that the lock will continue to function, even if the unit loses power!

To maintain temperatures from 33-38 degrees Fahrenheit, this merchandiser boasts a bottom-mounted 1/3 hp compressor that runs on eco-friendly R290 refrigerant which has an ozone depletion potential (ODP) of 0 and a global warming potential (GWP) of 3, making it an environmentally-responsible choice for your business. In addition, the bottom-mounted design makes it easy for customers to view and pick up products due to the raised bottom shelf.

A "Low-E" double pane thermal insulated glass door allows for crystal clear product visibility and combines with foamed-in-place insulation to retain cold temperatures. Five durable, PVC-coated wire shelves are included to provide stability and organization for a beautiful presentation that customers won't be able to resist!

Overall Dimensions:
Width: 30"
Depth: 35"
Height: 78 5/8"

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • NSF Listed

    NSF Listed

    This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

  • Energy Star Qualified

    Energy Star Qualified

    This item has been Energy Star Qualified by the US Environmental Protection Agency and the US Department of Energy, making it an energy-efficient product.

  • UL US & Canada

    UL US & Canada

    This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL) for use in the United States of America and Canada.

  • 5-15P


    This unit comes with a NEMA 5-15P plug.

Warranty Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

PLEASE NOTE: This is not a replacement warranty. Units purchased in 2013 or later will have a 3 year parts and labor warranty; units purchased prior to 2013 will have a 1 year parts and labor warranty. RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register

Find Related Products