$11,632.00/Each

This product is no longer available. We've left this page up for reference only.

Usually Ships in 5-6 Months from manufacturer

Lead times vary based on manufacturer stock

Product Overview

  • Ships unassembled for quick and easy installation
  • Posi-Loc panel fasteners for an airtight fit; 4" CFC-free urethane insulation for efficient operation
  • 26 gauge stucco embossed galvalume steel interior and exterior
  • Floorless design includes vinyl screeds for a tight seal
  • 208-230V self-contained refrigeration system operates at 38 degrees Fahrenheit
UPC Code:400013934581

Kolpak QSX7-0812-CT-L-T3 Specs

Quantity
1/Each
Shipping Weight
1346 lb.
Width
93 Inches
Depth
139 Inches
Height
87 3/4 Inches
Door Width
26 Inches
Nominal Width
8 Feet
Nominal Depth
12 Feet
Door Height
66 Inches
Height (with refrigeration unit)
107 1/2 Inches
Nominal Height
7 Feet
Voltage
208/230 Volts
Capacity
532 cu. ft.
Compressor Location
Top Mounted
Features
Made in America  NSF Listed
Floor
Without Floor
Hinge Location
Left
Horsepower
3/4 HP
Plug Type
Hardwire
Refrigerant Type
R-448A
Refrigeration Type
Self-Contained
Temperature Range
38 Degrees F
Usage
Indoor

Kolpak QSX7-0812-CT-L-T3 Details

Keep bulk quantities of your refrigerated goods chilled to food safe temperatures with this Kolpak QSX7-0812-CT-T3 Polar Pak walk-in cooler! The self-contained 3/4 hp refrigeration system is mounted flush to the ceiling so that you can use 100% of your unit's interior for maximum space-saving efficiency. The system is extremely simple to install and features an automatic condensate evaporator to eliminate the need for a drain line and other plumbing, saving you money on the services of a plumber or refrigeration technician. It uses R-448A refrigerant to maintain a temperature of 38 degrees Fahrenheit.

The 26 gauge stucco embossed galvalume steel panels snap together with ease and boast Posi-Loc fasteners to provide you with a perfect airtight fit. Inside the panels is 4" thick CFC-free urethane insulation that not only helps the cooler operate efficiently and maintain consistent temperatures, but also helps give it exceptional structural integrity! The floorless design comes with vinyl screeds for an easy installation and tight seal that allows you to install this model on a ground-contact concrete floor. This provides you with enhanced structural support over similar units with aluminum floors, making it great for situations where heavy shelving or fully-loaded carts will be used.

Workers can easily access the cooler's contents through the 26" wide door that boasts adjustable spring loaded hinges and a durable, ergonomic handle. The door has integrated heater for added protection against condensation, while a safety release is also included inside the unit to prevent accidental entrapment. A 2 1/2" dial thermometer is mounted on the cooler's exterior for simple temperature monitoring, while the interior is illuminated by a vapor-proof interior light for easy product identification. A 208-230V electrical connection is required for operation.

Overall Dimensions:
Width: 93"
Depth: 139"
Height (without refrigeration unit): 87 3/4"
Height (with refrigeration unit): 107 1/2"
Capacity: 532 cu. ft.

Attention CA Residents:

Customer questions about this product

Can I order an outdoor Walk-in unit?

Kolpak Outdoor Walk-ins require a quote from our special orders team. Please contact us at [email protected]

How much clearance is necessary to install this walk-in unit?

For best results, there must be 18" of vertical clearance above the refrigeration unit for top-mount units, and 2’ of clearance for side-mount units for proper ventilation. Failure to do so may result in overheating.

My city or state has special requirements for walk-in refrigeration. What do I need to know before purchasing this item?

Oregon residents: The state of Oregon charges a tagging fee for inbound shipments of this item. You will be contacted regarding this fee after placing your order.

If you have any questions, please contact Special Orders prior to making your purchase.

Where is the door located on this Kolpak walk-in?

On a standard unit, the door will be located on the panel that is listed first in the product dimensions. For example, a 10' x 8' x 7' walk-in will come with the door located on the 10' panel. A 5' x 4' x 6' walk-in will come with the door on the 5' panel. Each panel is made up of smaller sections. The door is fitted onto a 46 1/2" section that can be moved to another panel in the field, as long as it is swapped out with a section of the same 46 1/2" width. In order for the door to be moved, the walk-in must also include a floor.

Can this item fit through a standard height 80" doorway ?

Due to the height of this item, it may not be able to fit through a standard 80" tall doorway when standing upright. Please consider the best means of entry before purchasing, or measure your entryway to ensure that you will be able to bring your order inside if the item cannot be carried on its side.

When I order this product, can I request liftgate delivery?

This item is too large and heavy for a liftgate. It can be delivered with a truck-level loading dock or forklift. Contact our Customer Solutions team prior to placing your order if you would like to discuss other delivery options.
Ask your own question!
  • Made in America

    Made in America

    This item was made in the United States of America.

  • Hardwired

    Hardwired

    This product must be hardwired by a professional; it does not plug into a standard wall outlet.

  • NSF Listed

    NSF Listed

    This item has been certified by NSF International to meet applicable product standards on public safety, health, and / or the environment.

Resources and Downloads for
Kolpak QSX7-0812-CT-L-T3

A PDF viewer is required to view this product's information. Download Adobe Acrobat software