Ships free with Plus

You will only be emailed once the product becomes available. We won't add you to our email list or share your data.

  • Cordless design maximizes performance and productivity
  • Eliminates the liability of intrusive power cords
  • Automatically stops when in the upright position to eliminate extra movement
  • Lighter than most vacuums for extra mobility
  • Features a two-speed motor with settings for quietness and performance
  • 13" cleaning path
Quality Rating:
UPC Code: 073502045831
Upright Maintenance Video: MPWR™ 40V Cordless Upright

Upright Maintenance Video: MPWR™ 40V Cordless Upright

Before you perform any maintenance to your MPWR 40V Cordless Upright, remove the battery. Unzip the bag case to check the filter bag. It needs to be replaced when debris reaches the maximum fill line. Pull this collar down to release the bag dock. Gently pull the carpet collar out to seal the bag. Remove it from the bag dock and throw it away. Now slide a new bag firmly into the dock until the hook catches the collar. Rotate the bag back up and press firmly until it snaps into place. Then zip up the outer bag. To clean hair and debris from the brush roller, first remove the two black screws. Lift off the wiper blade and lift the metal guards to access the brush roll channel. Use scissors to cut across the channel to easily remove the debris and obstructions. To re-secure the wiper blade, lay down the metal guards. Place the front hinge of the wiper blade on first, then tilt it back and re-secure with the screws. To remove or replace the brush roll, use a T20 torque screwdriver to remove the seven screws that secure the base plate to the vacuum. Take off the base plate, then remove both the brush roll and the belt. On the new brush roll, rotate the plastic black endcap to show the word "normal" facing up. Make sure both endcaps have the same setting face up before inserting it into the powerhead nozzle. Slide the belt back into place then manually spin the brush roll to ensure it spins freely before putting the cover back on and securing it with the seven screws. If the vacuum turns off automatically while cleaning, you could have a clog. Turn it off and back on to reset it. If it shuts off again, check for an obstruction. Check the bag and the brush roll first. If you don't find any clogs, detach these rubber straps from the bag case. Remove the screws and tilt the battery dock forward. Twist this connector counterclockwise. Pull out the tube and check both parts for a clog. Remove any obstructions you find. Slide the tube back into place and twist the connector clockwise to secure. Tilt the battery dock back and secure it with the screws. Finally, slide the straps back into place. And that's it. If you have any questions, don't hesitate to contact us!

Copy and paste the embed code above.

Ensure your MPWR 40V Cordless Upright continues to function correctly with the important maintenance instructions. To learn the maintenance steps, watch this video.

Upright Usage Video - MPWR™ 40V Cordless Upright

Upright Usage Video - MPWR™ 40V Cordless Upright

The Hoover Commercial MPWR 40V Cordless Upright requires tool-free assembly before its first use. First, make sure the connector is installed on the upper tube. Then, insert into the debris transfer tube until it locks. Twist the connector clockwise until it clicks. This upright is powered by the new MPWR 40V battery. It comes 25% charged so be sure to fully charge it before the first use. Slide the battery into the charger until it clicks into place and the LED status indicator is lit. If the indicator light is orange, the battery is too hot or too cold to charge. It will begin charging once it reaches the proper temperature. Please contact us if the light is ever flashing red and green in case there's an error with the battery. The light will flash green while the battery is charging and turn solid green when it is fully charged. To remove, press the release button and slide out the battery. Then insert the battery to the vacuum until it locks into place. To start cleaning, step on the powerhead and lean back the handle into operating position. Push the fingertip control once forward to select Hush mode or push the control all the way forward to Boost mode when cleaning high traffic areas. If you set the handle to the upright position, the auto sub feature will turn off the motor. To start cleaning again, turn off the vacuum, recline the handle, and turn it back on. When you're done cleaning, turn the fingertip controls back to off and tilt the vacuum to the upright position. And that's it. If you have any questions, don't hesitate to contact us!

Copy and paste the embed code above.

Before using your MPWR 40V Cordless Upright for the first time, there are a few steps that need to be taken. To learn what needs to be done, watch this video.

Length 8 1/4 Inches
Width 14 3/8 Inches
Height 39 1/2 Inches
Voltage 40 Volts
Wattage 430 Watts
Airflow Rating 72 2/5 - 90 1/2 CFM
Battery Charger Weight 2
Battery Weight 4.5
Capacity 9.87 qt.
Cleaning Path Size 13 Inches
Color Black
Features HEPA Filtration
Noise Level 65 - 71 dB
Power Type Cordless & Battery Powered
Style Bagged
Type Upright Vacuums
Weight 9.89 lb.


Maintain optimum cleanliness in your commercial or institutional space without breaking the budget with the help of this Hoover HVRPWR 40V cordless upright vacuum cleaner! This cordless vacuum cleaner has a 13" cleaning path that allows you to speed up cleaning and maximize productivity in large commercial spaces. Equipped with a HEPA filter, this vacuum traps and stops the circulation of dust, dirt, and harmful allergens.

This vacuum is powered by the included HVRPWR 40V battery system for cordless operation, and it provides between 37 and 60 minutes of uninterrupted performance depending on the operating mode and charges completely in just 90 minutes. The charger monitors the temperature of the battery to prevent overheating and promote safety. It also features a sleep mode to help regulate the battery's temperature. Additionally, its auto charging feature terminates discharge. This charger features an LED status indicator for precise charging information. It shows orange when the battery is too hot or cold to charge, flashes green while the battery is charging, and becomes solid green once the battery is fully charged. Plus, a regulator sets a maximum charge time to protect the battery.

This vacuum has a two-speed motor that operates in "hush" and "boost" mode. Hush mode ensures less disruption during daytime cleaning or as otherwise needed, while boost mode kicks performance up a notch to help you tackle tough jobs. The vacuum also has an auto stop feature that disengages power to the brushroll and motor when the vacuum is in an upright position to eliminate extra movement. It is also 30% lighter than its previous generation model to add mobility and the ability for more people to operate the vacuum. With a sleek and lightweight design, this vacuum cleaner is easy to maneuver and looks great wherever you take it!

Overall Dimensions:
Length: 8 1/4"
Width: 14 3/8"
Height: 39 1/2"
Capacity: 9.87 qt.

  • UL Listed

    UL Listed

    This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL).

  • Carpet & Rug Institute - Gold

    Carpet & Rug Institute - Gold

    This item complies with the Carpet and Rug Institute's Gold Performance Standard for proper soil removal, dust containment, and texture protection. This seal of approval ensures air quality and enhanced cleaning standards.

Leave a review of this product!

If you've used this product, log in and leave a review to tell us and other customers what you thought about it. Get paid up to $16 for submitting one of the first text, photo, or video reviews for this item. View your account for details.

Login or Register