$4,208.05/Each

Ships free with Plus

Contact us for pricing

Call 717-392-7472 (Mon-Thur 24 Hours, Fri 12AM-8PM EST
Sat & Sun: 9AM-4PM EST)

  • 1-speed, 1/2 hp knife driver motor; simple, automatic operation
  • 13" diameter chrome-plated carbon steel knife
  • Poly V-belt drive system for optimal performance and extended durability
  • Full 45 degree angle gravity feed
  • Cuts slices up to 9/16" thick
  • Simple start / stop button
  • Removable carriage assembly
  • 120V; 1/2 hp
Shipping:

You May Also Need

Hobart Edge Slicer

Hobart Edge Slicer

Get the reliable performance you demand from the brand you trust with the Hobart Edge slicer! Hi! I’m Matt Schuler and today I am going to show you how you can save a lot of time and money by choosing Hobart’s sleek, affordable, and easy-to-use Edge slicer –the slicer that cuts costs without skimping on features. Hobart is known worldwide for providing the busiest restaurants and delis with the heavy duty slicers needed to slice any amount of meat, cheese, or vegetables. In fact, features that you once found only on more expensive slicers are now standard on the Hobart Edge! A 1/3 horsepower motor gives the Hobart Edge slicer an ideal blend of durability and performance. which, when combined with the knife’s large diameter, drives the knife at 370 revolutions per minute for clean, precise slices. This Hobart carbon steel knife can give the thinnest of slices, but can also be set to give you slicers up to 5/8' thick! The Hobart Edge slicer boasts a uniquely quiet v-belt drive system that has fewer moving parts than comparable gear-driven systems. This means you'll save on maintenance in the long run. A top-mounted Borazon stone sharpener hones and sharpens your knife in a blazing fast 5 seconds to ensure that it is always razor sharp and ready to deliver consistent results! It's a one lever operation to sharpen - it couldn't be easier! The Hobart Edge slicer has a number of safety features that work hand in hand to ensure smooth and safe operation. Including a permanently mounted ring guard that acts to shield your hand from the knife during operation and cleaning. The gauge plate must be closed to be removed and once removed cannot be opened - protecting your hands from the blade. This UL and NSF listed slicer is super easy to clean and sanitize. This slicer's carriage and knife cover are each made of tough anodized aluminum that wipes clean easily and provides corrosion resistance. To make things even easier, the carriage, knife cover, rear deflector, and sharpening stone are each removable and submersible for a more thorough cleaning and sanitizing. This also offers access to the one-piece anodized aluminum base. Which, unlike some other slicers, has no cracks, crevices, or bolt holes where product can lodge and bacteria might grow. For a convenient package that gives you everything you need to properly clean your new slicer, be sure to check out our meat slicer cleaning kit! This kit comes with an innovative cleaning wand, and a pack of 60 scrub pads, a bottle of Formula D degreaser, our QuickSan sanitizer, a can of LubriQuick lubricant, a brush and even a cut-resistant glove for your safety. You get all of that for one low price, and right now you also get a carrier to keep it all organized. Best of all, the kit comes with a set of detailed step by step instructions that will make anyone an expert slicer cleaner. Pleasure be sure to check out our slicer buying guide where you will find more information on slicers, as well as all of the other models we offer.

Copy and paste the embed code above.

Check out this informative video for an overview of the Hobart Edge Slicer! Our corporate chef, Matt, will show you the product features and highlights of this exceptional slicer.

How To Clean A Slicer

How To Clean A Slicer

Get your slicer clean and back to work in a flash with our meat slicer cleaning kit! This kit comes with all the cleaning supplies you’ll need to make sure your slicer is cleaned, sanitized, and lubricated. For the ultimate protection against injury while cleaning your slicer, the kit comes with Carlisle’s innovative easy slicer cleaning wand and a pack of 60 scrub pads, a cut resistant glove, powerful Formula-D spray degreaser, Noble Chemical QuikSan spray sanitizer, and Lubriquik food grade silicone. It also comes with a brush to get to those hard-to-reach places and detailed instructions on how to use everything in the kit. To clean your slicer, please follow these quick and easy steps: always use cut resistant gloves when cleaning your slicer. Attach the cleaning pad to the tip of the slicer cleaning wand and spray the pad with QuikSan sanitizer. Turn the thickness control knob to zero, and turn the slicer on. While the slicer is in motion, run the cleaning pad along the front and back of the blade. Turn the slicer off. Disconnect the power source, and discard the cleaning pad. Remove the product table, slice deflector, and the center plate. Wash, rinse, and sanitize the removed parts, and let them air dry. Clean the slicer’s exterior and the blade with Formula-D degreaser. Wipe from the center of the blade outward. Using a clean cloth, rinse the entire unit with warm water. Do not submerge the unit. Spray QuikSan sanitizer onto the slicer product areas and the blade. Allow time to air dry. Use Lubriquik spray to lubricate the table slide rod, and if applicable, the end-weight slide rod. Finally, reassemble the slicer, and you’re good to go. Please consult your slicer’s manual for specific assembly and care instructions. Thanks for watching, and if you have any questions, please click on our Live Chat button.

Copy and paste the embed code above.

Need to learn how to clean your meat slicer? Check out this video to learn about our slicer cleaning kit! See all that’s included and follow Chef Matt’s step-by-step instructions.

Hobart EDGE13A-11 Specs
Width 27 5/8 Inches
Depth 22 7/8 Inches
Height 28 3/16 Inches
Maximum Product Width 9 1/2 Inches
Maximum Product Height 6 1/2 Inches
Amps 4 Amps
Hertz 60 Hertz
Phase 1
Voltage 120
Horsepower 1/2 HP
Installation Type Countertop
Maximum Slice Size 9/16 Inches
NSF Listed Yes
Operation Automatic
Power Type Electric
Slicer Usage Mid Tier
Slices Cheese Yes

Hobart EDGE13A-11 Details

Powerfully slice through your signature meats and cheeses with this Hobart EDGE13A-11 13" heavy-duty automatic meat slicer. This slicer is the perfect solution for all your medium-duty slicing needs! Whether you own a high-end deli, local butcher shop, or neighborhood grocery store, this slicer is packed with countless benefits to outperform all others in its class. Made with durable anodized aluminum that is easy to clean and maintain, this unit delivers pound after pound of sliced product in the quickest and most efficient time frame possible.

This model comes with an extra large product tray so you can feed even the largest loaves of meat in a quick and efficient manner. It accommodates food up to 9 1/2" wide and 6 1/2" tall, or 8" in diameter. A wide, 11 1/2" carriage span allows for a smooth glide. This unit also operates with a 45 degree angle gravity feed that requires less mechanical pressure. A removable meat grip with an ergonomic handle ensures that meat is secure in the slicer.

The durable poly V-belt drive system reduces maintenance without sacrificing the high-end performance you expect. The exclusive design extends the belt life while still producing optimal slicing, and the entire system operates much quieter than other standard slicers. Plus, the 1/2 hp motor provides added power for slicing cheese. A simple start/stop button with a protective seal is so user friendly, even your newest employee will have no trouble using it. Plus, the motor has a no volt release so that, in the event of a power outage, the slicer must be restarted before operation can continue.

The 13" chrome-plated carbon steel knife offers precision while providing several different slice adjustments. It consistently cuts meat, vegetables, or cheese from paper thin to 9/16" thick. A top mounted ceramic sharpener hones and sharpens your knife, ensuring that it's always razor sharp and ready to slice. Features like the gauge plate interlock, carriage interlock, and ring guard all ensure operator safety during use and cleaning.

The anodized aluminum base features smooth, durable surfaces that are easy to clean, and since the base is one piece, there are no holes or crevices for food to collect. Plus, the entire carriage system is removable for thorough cleaning and sanitation. This slicer requires a 120V electrical connection for operation.

Overall Dimensions:
Width: 27 5/8"
Depth: 22 7/8"
Height: 28 3/16"

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Attention CA Residents: Prop 65 Warning

  • NSF Listed

    NSF Listed

    This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

  • ETL US & Canada

    ETL US & Canada

    This item meets the electrical product safety standards imposed by the ETL, a division of the Intertek Group, for use in the United States and Canada.

  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

Resources and Downloads for
Hobart EDGE13A-11

Spec Sheet Specsheet Hobart's Warranty Information Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register