Anets 14GS Natural Gas 35-50 lb. GoldenFry Standard Fryer - 111,000 BTU
Customers Also Viewed
plus $999.00 / Each
Other Available Fuel Types:
- Open vat design with sloped sides
- 35-50 lb. shortening capacity; 70 lb. per hour cooking capacity
- Cross-fire burners provide a 4-sided heating system
- All stainless steel construction
- 111,000 BTUs per hour
- Fully insulated cabinet
- Integrated thermostat behind door
- Natural gas
You May Also Need
Chef Master 30" Fryer Clean Out Rod with Handle
plus $6.59 / Each
Carlisle 4011105 Sparta 23" High-Heat Fryer Brush with L-Tip Teflon® Bristles - 2" Bristle Diameter
plus $23.99 / Each
Regency 48" Stationary Gas Connector Hose Kit with 2 Elbows and Full Port Valve - 3/4"
plus $54.49 / Each
Noble Chemical 2 Gallon Fryclone Fryer Oil Stabilizer and Filter Powder - 2/Case
plus $55.99 / Case
Noble Chemical 5.3 oz. / 160 mL Fryclone Fryer Oil Stabilizer and Filter Powder - 90/Case
plus $40.99 / Case
Noble Chemical 8 oz. / 240 mL Fryclone Fryer Oil Stabilizer and Filter Powder - 72/Case
plus $43.49 / Case
Regency 48" Mobile Gas Connector Hose Kit with 2 Elbows, Full Port Valve, Restraining Device, and Quick Disconnect - 3/4"
plus $99.99 / Each
Fill out your cooking lineup or replace a worn out fryer with this Anets 14GS 35-50 lb. natural gas stainless steel floor fryer.
This unit boasts an impressive 111,000 BTUs of heating power that is ideal for your lower volume frying needs! Whether you are making popcorn chicken and shrimp for your tavern or adding mozzarella sticks and french fries to your snack bar, this 35-50 lb. floor fryer is a great choice. This fryer provides a dependable, easy-to-use option for many types of foodservice establishments.
This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.
Made in America
This item was made in the United States of America.
CSA Design Cert
This item has been certified by the Canadian Standards Association (CSA) and meets applicable U.S. standards.
CSA Blue Flame
This item has been certified by the Canadian Standards Association (CSA) and meets applicable Canadian standards for appliances using gas or petroleum fuel.
3/4" Gas Connection
This unit comes with a 3/4" gas connection to be installed by a professional.
An integrated thermostat and gas control valve allow for a fully customized cooking experience. The thermostat is concealed behind the fryer's cabinet door to protect it from damage and it has a temperature range of 200-375 degrees Fahrenheit. This unit also has a 100% gas shut off valve and a hi-limit switch that turns off the gas if the fryer reaches 435 degrees Fahrenheit.
This fryer features a stainless steel construction, except for the rear and bottom braces, which adds extended durability. The interior cabinet is fully insulated to keep your kitchen cool. Plus, the stainless steel open frypot is long-lasting and easy to clean.
Two Fry Baskets
This fryer comes with two nickel plated oblong fry baskets so that you can get started cooking right away! Plus, the twin baskets are great for smaller portions or cooking different types of foods at the same time.
Removable Basket Hanger
The basket hanger provides a convenient place for baskets to drain after cooking. It is also completely removable without the use of tools for when you need to thoroughly clean your fryer at the end of the day.
Built-In Flue Deflector
This fryer features a built-in integrated flue deflector to direct hot gases out through your ventilation system.
1 1/4" Drain
The full port drain ensures that you can quickly and easily drain away used oil for disposal.
The adjustable 6" legs mean that you can keep your fryer level and stable on uneven floors.
Open Vat Design with Cross-Fire Burners
The unit's open vat design with sloped sides forces food particles to fall into an easily accessible and wide cold zone, which permits users to reach in and wipe out even the hardest to reach corners. The frypot is heated by a pair of special cross-fire burners that provide a 4-sided heating system for highly efficient and consistent frying results.
Customer Q&A Ask a Question
- Width: 15 5/8 Inches
- Depth: 31 Inches
- Height: 45 1/2 Inches
This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.
Resources and Downloads for
Anets 14GS NAT
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications.
Leave a review of this product!
If you've used this product, log in and leave a review to tell us and other customers what you thought about it. Get paid up to $16 for submitting one of the first text, photo, or video reviews for this item. View your account for details.Login or Register