Regency 74" Knock Down Chrome Post

Regency wire shelving is easy to install, and in this video I'll show you how to do it. To begin, lay out your shelves, posts, and split sleeves. If you are assembling a mobile unit, you can go ahead and insert those into the posts now. Simply push them in, it can take a bit of force, but the ring on the stem will hold them in place inside the post. Now, if you take a look at the posts, you'll notice that they are notched in one inch increments, this will make it easy for you to align your shelves. Once you decide where you'd like your bottom shelf, remembering that ServSafe tells us to have the bottom shelf at least 6" off the floor, simply put one side of a split sleeve on your post, then click the other side of the split sleeve into it. Repeat on the three other posts. Now, put your shelf on its side, and slide the posts into the holes. Give the whole thing a quick flip, and then push the shelf down onto the sleeves to tighten. Once you have the shelf upright, just continue to apply split sleeves, and then shelves. Always remembering to push down on the shelves to tighten. And there you go, a complete shelf rack. Thank you for watching. If you have any questions, please use our live chat button.