Mix & Match Discounts
Quantity Discounts

$191.69/Each

Ships free with Plus
Buy 1 - 4 $234.49/Each

You will only be emailed once the product becomes available. We won't add you to our email list or share your data.

Other Available Sizes:

  • 18-gauge type 304 stainless steel top offers greater durability and corrosion-resistance than type 430
  • Galvanized steel undershelf and legs with adjustable plastic bullet feet
  • 4" backsplash helps prevent spills
  • Aluminum corner brackets on undershelf
  • 500 lb. top shelf weight capacity; 380 lb. undershelf weight capacity
Quality Rating:
good
Shipping:

Add a dependable work surface to your prep area with this Regency 24" x 72" 18-gauge 304 stainless steel commercial work table with a 4" backsplash.

This work table features a durable stainless steel top shelf to ensure a long service life in your business. It's perfect for a variety of tasks, making it extremely versatile. The 4" backsplash helps keep contents contained, while its undershelf offers a convenient storage solution, so you can keep everything you need close at hand for a streamlined operation. Assembly is simple using the included hardware.

  • NSF Listed

    NSF Listed

    This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

18-Gauge Stainless Steel Top Shelf

This Regency commercial work table features a durable 18-gauge type 304 stainless steel top shelf that can support up to 500 lb. of evenly distributed weight, making it more than capable of handling your daily prep tasks like pressing burger patties, chopping vegetables, or working with dough. Type 304 stainless steel offers greater corrosion resistance than type 430 stainless steel options, making it the ideal choice for your kitchen. It's perfect for bakeries, grocery stores, bars, and much more!

Galvanized Steel Undershelf

The galvanized steel undershelf can hold up to 380 lb. for storing additional equipment and supplies.

Aluminum Corner Brackets

This table's undershelf is supported by aluminum corner brackets for additional security.

4" Backplash

This work table boasts an 18-gauge stainless steel 4" backsplash to match the top. This guard helps protect your walls and floors from accidental spills, and it also gives you that extra assurance that your blender, food processor, or any other small, light-weight piece of equipment won't fall off the back of the work surface.

Adjustable Bullet Feet

Adjustable plastic bullet feet allow you to level your table on uneven surfaces for the best possible stability.

Galvanized Steel Legs

This unit features galvanized steel legs to ensure stability and excellent corrosion resistance.

Ships Unassembled

This table ships unassembled to save you on shipping costs. An allen wrench and two set screws are included for easy assembly.

Customer Q&A Ask a Question

Can I put equipment on my work table?
Smaller appliances like blenders or can openers should be fine. For maximum stability, we recommend limiting the placement of heavy objects on work tables. We have a great selection of equipment stands which are designed specifically to hold countertop equipment.

Watch More Videos

Regency Stainless Steel Gauge and Type Selections

The gauge and type of any stainless steel product can drastically change its use and application. Watch this video to learn more about Regency stainless steel!

Regency Stainless Steel Work Table Assembly

Check out this video for step-by-step instructions on how to assemble your Regency stainless steel work table!

Regency offers stainless steel in a variety of gauges and types that correspond to different levels of strength and durability. By understanding the gauge and type, you can easily determine what equipment is best for your application. Regency stainless steel is available in three gauges: fourteen, sixteen, and eighteen. Gauge refers to the thickness of the metal, with the thickest being the lowest number, and therefore the strongest. That makes fourteen-gauge stainless steel thicker than sixteen- or eighteen-gauge stainless steel. This also means that fourteen-gauge is heavy-duty, sixteen-gauge is standard-duty, and eighteen-gauge is light-duty. Types of stainless steel include three-oh-four and four-thirty. Type refers to the chemical make-up of the material. Heavy- and standard-duty products are available in type three-oh-four stainless steel, as it contains both chromium and nickel for corrosion-resistance. Select light-duty products also come in type three-oh-four, while the rest are made with type four-thirty stainless steel. This type contains chromium and no nickel, offering less corrosion-resistance than type three-oh-four. Four-thirty stainless steel is also magnetic, which can be a nice added benefit while you're working. Once you determine the optimal gauge and type for your business, shop Regency for stainless steel equipment of all sizes and configurations.

Copy and paste the embed code above.
Assembling Regency stainless steel work tables is quick and simple! Each table ships with a tabletop, undershelf, legs, and an allen wrench, plus two extra set screws. Place the tabletop upside down on a surface that won’t scratch it. Insert the legs into the tabletop gussets. You may need to loosen the set screw if one struggles to go in. Partially tighten the set screws—full tightening will come later. On each of the legs, mark the height where you’ll be installing your undershelf. In any foodservice application, the shelf should be at least six inches off the ground for food safety. Once marked, slide the shelf onto the legs and fully tighten all the set screws. Adjust the feet as needed to meet your height requirements or to compensate for uneven flooring. Flip the table over and peel off the protective film. Your work table is now ready to be used!

Copy and paste the embed code above.

Compare to Other Products

Overall Dimensions:
  • Length: 72 Inches
  • Width: 24 Inches
  • Height: 38 Inches
  • Work Surface Height: 34 Inches
  • Backsplash Height: 4 Inches
Shelf Capacity:
  • Top Capacity: 500 Lb.
  • Undershelf Capacity: 380 Lb.

Resources and Downloads

Spec Sheet Specsheet Regency Tables and Sinks Warranty Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Customer Reviews

  • Overall User Rating: Regency 24" x 72" 18-Gauge 304 Stainless Steel Commercial Work Table with 4" Backsplash and Galvanized Undershelf

    4.3 stars from 10 reviews

    6
    2
    1
    1
    0

    People Talk About:

    table tables great looks different easy kitchens perfectly sizes splashes
    Great tables. We have all of our tables from Regency and haven't had any issues. The backsplash is great for catching splashes and spills and the stainless holds up wonderfully and is easy to clean.
    Looks great and overall functions well. It can get s but wobbly at times but we are using it for our smoothie station and there is a lot of vibration which may add to it. Can’t beat it for the price.
    Best and very nice product , i highly recommend, looks very professional. I love this product, we have in all kitchens in all buildings. very good
    This Regency 6' work table is fantastic! I thought about purchasing one without a backsplash, but I'm so glad that I didn't! Let's face it... creation is messy! And, honestly, I don't know why anyone would purchase a work table without an undershelf. The undershelf option is awesome if you don't want to clutter up your space with a whole lot of unnecessary shelving units. These tables are easy to put together and look great. The only thing I would change about this purchase if I could go back would be to get the same table with the deeper dimension. I believe there is a 30"x72." Since I like to spread out, that would've been a wiser choice. But this is a great prep table!
    Good price on this size of table. I have purchased several different tables this length from this site, but this is the only one that is wobbly.
    Thank you for your review! We are sorry this table is not even. A Customer Solutions Representative will contact you directly about this.
    This work table fits snugly against the wall, the back-splash is perfect for stopping crumbs and liquid from falling behind the table. We recommend getting this type of table.
    This stainless steel commercial work table is exactly as described and is of average quality. It suits our purposes perfectly and is definitely a good value for the money.
    Great Tables! Works great in restaurant kitchen environment. Fast shipping! Adjustable bottom shelf makes tables very versatile for storing many different products. Would definitely order again!
    I have used & abused this table for 4 years now & it looks as good as the day I purchased it. Very strong & stable.
    We ordered several different sizes of this work table to "update" our corporate cafe'. The product was exactly as described, was shipped very quickly and arrived in perfect condition. This table looks nice, is a decent quality and is an excellent value which is why I gave it 5 stars. This was exactly what we needed. The website is easy to navigate and checkout was very simple.

Leave a review of this product!

If you've used this product, log in and leave a review to tell us and other customers what you thought about it.

Login or Register