Mix & Match Discounts
Quantity Discounts

$331.64/Each

Ships free with Plus
Buy 1 - 4 $368.49/Each
Wish List
Rapid Reorder

Other Available Sizes:

  • 16-gauge type 304 stainless steel top offers greater durability and corrosion-resistance than type 430
  • 1 5/8" stainless steel legs with adjustable plastic bullet feet
  • Holds approximately 640 lb.
  • Four legs for even weight distribution
  • Ideal for a variety of floor layouts
Shipping:
View all Regency Tables & Sinks Stainless Steel Open Base Work Tables

Regency Tables & Sinks

You May Also Need
View All Items

Add valuable work space to your kitchen with this Regency commercial open base 30" x 72" work table!

This work table features a 16 gauge type 304 stainless steel top, which offers greater durability and corrosion resistance than type 430 stainless steel options, making it the ideal choice for your kitchen. It's perfect for a variety of tasks, making it extremely versatile. The open base design helps with easy cleaning, and assembly is simple using the included hardware.

  • NSF Listed

    NSF Listed

    This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.
  • ADA Compliant

    ADA Compliant

    This item meets the criteria established by the Americans with Disabilities Act (ADA), helping make your restaurant more accessible to people with disabilities.

Durable Construction

This work table's shelving unit is made of 16-gauge type 304 stainless steel for a long-lasting, dependable service life. Plus, it boasts a weight capacity of approximately 1000 lb., yet is lightweight enough to easily maneuver around your kitchen.

Support Bracing

Thanks to the "U" shaped stainless steel leg bracing on the unit secured by strong aluminum sockets, this table has added support to hold your smaller appliances such as blenders or can openers.

Sturdy Legs

Mounted on 4 strong, 1 5/8" 16-gauge 304 stainless steel legs this unit will be sure to remain upright and secure.

Adjustable Feet

Attached to the legs are the adjustable, bullet feet made from plastic to provide ample support for the unit.

Simple Installation

Thanks to the included allen wrench and set screws, this unit requires little effort to assemble, allowing you to begin using it as soon as possible!

Customer Q&A Ask a Question

Can I put equipment on my work table?
Smaller appliances like blenders or can openers should be fine. For maximum stability, we recommend limiting the placement of heavy objects on work tables. We have a great selection of equipment stands which are designed specifically to hold countertop equipment.
Regency Stainless Steel Gauge and Type Selections
Regency Stainless Steel Work Table Assembly

Watch More Videos

Regency Stainless Steel Gauge and Type Selections

The gauge and type of any stainless steel product can drastically change its use and application. Watch this video to learn more about Regency stainless steel!

Regency Stainless Steel Work Table Assembly

Check out this video for step-by-step instructions on how to assemble your Regency stainless steel work table!

Transcript Embed
Regency offers stainless steel in a variety of gauges and types that correspond to different levels of strength and durability. By understanding the gauge and type, you can easily determine what equipment is best for your application. Regency stainless steel is available in three gauges: fourteen, sixteen, and eighteen. Gauge refers to the thickness of the metal, with the thickest being the lowest number, and therefore the strongest. That makes fourteen-gauge stainless steel thicker than sixteen- or eighteen-gauge stainless steel. This also means that fourteen-gauge is heavy-duty, sixteen-gauge is standard-duty, and eighteen-gauge is light-duty. Types of stainless steel include three-oh-four and four-thirty. Type refers to the chemical make-up of the material. Heavy- and standard-duty products are available in type three-oh-four stainless steel, as it contains both chromium and nickel for corrosion-resistance. Select light-duty products also come in type three-oh-four, while the rest are made with type four-thirty stainless steel. This type contains chromium and no nickel, offering less corrosion-resistance than type three-oh-four. Four-thirty stainless steel is also magnetic, which can be a nice added benefit while you're working. Once you determine the optimal gauge and type for your business, shop Regency for stainless steel equipment of all sizes and configurations.

Copy and paste the embed code above.
Transcript Embed
Assembling Regency stainless steel work tables is quick and simple! Each table ships with a tabletop, undershelf, legs, and an allen wrench, plus two extra set screws. Place the tabletop upside down on a surface that won’t scratch it. Insert the legs into the tabletop gussets. You may need to loosen the set screw if one struggles to go in. Partially tighten the set screws—full tightening will come later. On each of the legs, mark the height where you’ll be installing your undershelf. In any foodservice application, the shelf should be at least six inches off the ground for food safety. Once marked, slide the shelf onto the legs and fully tighten all the set screws. Adjust the feet as needed to meet your height requirements or to compensate for uneven flooring. Flip the table over and peel off the protective film. Your work table is now ready to be used!

Copy and paste the embed code above.

Compare to Other Products

Overall Dimensions:
  • Length: 72 Inches
  • Width: 30 Inches
  • Height: 34 Inches

Need Parts & Accessories?

View replacements or accessories for this item

Resources and Downloads

Spec Sheet Specsheet Regency Tables and Sinks Warranty Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Resources

Specs
Length 72 Inches
Width 30 Inches
Height 34 Inches
Backsplash Height Without Backsplash
Backsplash No
Configuration Straight
Features Customizable Height
Gauge 16 Gauge
Leg Construction Stainless Steel
NSF Listed Yes
Number of Legs 4
Size 30" x 72"
Stainless Steel Type Type 304
Table Style Open Base
Tabletop Material Stainless Steel
Top Capacity 640 lb.
Usage Standard Duty

Customer Reviews

  • Overall User Rating: Regency 30" x 72" 16-Gauge 304 Stainless Steel Commercial Open Base Work Table

    2.8 stars from 4 reviews

    0
    2
    0
    1
    1

    People Talk About:

    table legs more fixed loved tables easily needed fix fittings
    1 out of 2 found this review helpful
    I was hopeful that this table would be just what we needed for fairly light usage in our beverage area - but it lasted only about 3 months. We had issues with the legs from the start, and when our maintenance crew tried to fix the legs and make them more sturdy, the legs broke apart in a way that wasn't able to be fixed. Save yourself the trouble and buy a more expensive table with better legs and fittings.
    from Young Life's Lost Canyon on
    Thank you for your review, Debbie! We are sorry you were having issues with this table, a Customer Solutions Representative has reached out to you about your order.
    WebstaurantStore Customer Solutions
    1 out of 1 found this review helpful
    This table arrived dented, but we didn't have time to complain because it arrived the day we needed it. It does scratch easily, but so does most stainless. It is getting well loved.
    from Harmony Meadows, LLC on
    1 out of 2 found this review helpful
    Purchased this table, and since it's arrival, we've had soo many problems with it. Between the damaged leg, and the safety braces with mis-match screws, this has been a pretty challenging purchase. We really wanted to love it, but all of the issues we've had with it make it hard to do so. I hope they can work out the kinks with this one.
    from Palmer's Sweetery & Cafe on
    Thanks for the review! We are very sorry that you’ve had so many issues with this table. Our Customer Solutions team was happy to reship the damaged leg and make sure you received the correct hardware.
    WebstaurantStore Customer Solutions
    I have two of these tables and they work great for me. Without the under shelf, the table wiggles more than I want it to when bumped. The top scratches very easily so if that is a concern, this is not the right table for you.
    from Elite Events Rental on

Leave a review of this product!

If you've used this product, log in and leave a review to tell us and other customers what you thought about it.

Login or Register

Find Related Products

commercial stainless steel tables work   floating stainless steel shelves   folding stainless steel shelf   nsf stainless steel shelf   stainless steel bins   stainless steel cooling racks