Quantity Discounts


Ships free with Plus
Regularly: $119.99/Each

Other Available Types:

  • Holds up to 20 full size or 40 half size sheet pans; 400 lb. evenly distributed load capacity
  • Nesting design for easy storage
  • Ships unassembled to save money on freight
  • 3'' of space between ledges; 2'' of space between pans
  • Rail-type ledges support pans during transportation; (4) 5" casters provide easy mobility

Keep your kitchen running smoothly with the Regency 20 pan end load nesting sheet pan rack.

The Regency 20 pan end load nesting bun pan rack is perfect for holding the sheet pans in your busy commercial kitchen. Simply load up the rack, and you can easily transport large quantities of food around your back-of-house area. Best of all, this product is designed to fit snugly with other nesting bun pan racks, so it will take up less space when it’s in storage.

  • NSF Listed

    NSF Listed

    This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

Durable Aluminum Construction

To ensure this product can withstand use in your busy commercial kitchen, it is made with a durable, lightweight aluminum material. This material also means that you don't need to worry about the sheet pan rack rusting.

Provides Ample Storage Space

The ledges on this rack are spaced 3" apart, giving your foods plenty of room so air can properly circulate. It also has a 400 lb. evenly distributed weight capacity, so you can safely hold all of your cooked or prepared foods.

Nesting Storage

This product rack is angled, making it easy to combine with other nesting pan racks. This means you don't need to use up as much storage space when these racks are not in use.

Ships Unassembled

For economic savings on shipping costs, this product ships unassembled.

Mobile Design

This sheet pan rack comes with 2 locking and 2 non-locking 5" polyurethane casters to make transportation a breeze.

Easy to Clean

This product is NSF Listed, ensuring no food or spilled liquids get stuck in hard-to-reach corners.

How To Assemble A Regency Bun Pan Rack

Check out this video and watch as Chef Matt takes you step by step to assemble your Regency bun pan rack! It’s quick, easy, and saves you a ton on shipping costs!

If you’re looking for a durable end load or side load bun pan rack at an outstanding price, our Regency rack is the perfect solution for you. Because this model ships knocked-down, you’ll save money on shipping charges compared to a pre-assembled model, but don’t worry. These pan racks are easy to assemble. When assembled this Regency pan rack has the durability and strength of a welded unit and can hold up to 20 full size pans or 40 half size pans with 3 inches of spacing between the slides. And thanks to its heavy-duty, 5”, polyurethane, swivel casters, moving the rack around your kitchen or business is easy. Since two of the casters have brakes, you’ll be able to keep the rack where you want it, and to hold it steady during loading and unloading. This rack comes with four cross braces which are held securely in place with U brackets and bolts. The two larger side braces for the bottom of the rack are held in with larger bolts. To start, insert a support post into the top hole of one of the sides. Next, take a U bracket and attach it to the outside of the rack’s frame. Carefully hand-tighten the bolt and then repeat the process for the other side. Be sure not to over-tighten the bolts, or else you may damage the frame and cross braces. Then, attach the two middle supports, making sure the U brackets are on the outside of the rack. After installing the floor support bar, it’s time to do the second side. These support bars will fit into the slots the same way they did on the first side. Make sure to only hand-tighten the brackets. Insert each caster into the bottom of the frame. The locking casters should be installed in the same end of the rack so they can easily be set. Once the casters are properly aligned, large support posts can be installed. The large bolts go through the hole, securing the caster and post to the bottom of the rack. Put a bun pan in both the top and bottom sides of the rack to make sure your bun pan is level. Finally, tighten each bolt with a wrench. Your bun pan wrack is now ready to use.

Copy and paste the embed code above.

Compare to Other Products

Overall Dimensions:
  • Length: 26 Inches
  • Width: 20 Inches
  • Height: 69 Inches

Attention CA Residents: Prop 65 Warning

Resources and Downloads

Bun Pan Racks_Spec Sheet Specsheet Warranty Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Customer Reviews

  • Overall User Rating: Regency 20 Pan End Load Nesting Bun / Sheet Pan Rack - Unassembled

    3.3 stars from 4 reviews


    People Talk About:

    racks huge applications bakers Great kitchen application addition days construction
    Great value. We use for light application in the kitchen. Nothing heavyweight. So far no problems with this unit. Handy. Great addition to our kitchen
    Wow. I can't believe I'm just now figuring these out. A huge huge space saver. The racks nest together which means we can put about 4-5 bakers racks in the same spot as 1 of the normal square baking racks. Huge plus when you need to store these somewhere. They are used exactly like any other bakers rack as well. Very simple to assemble, and will probably only buy these in the future.
    No instructions came with the product, had to use a picture as reference. A little smaller the expected with the pan slides too close for a few applications. Currently using it in my walk-ins to hold prep.
    0 out of 1 found this review helpful
    Poor quality, weak construction. Bent after couple days of usage and we didn't put metal or stones on it, just food. It even wasn't fully loaded.
    Thank you for reviewing this rack! We're sorry it did not last for you. A Customer Solutions Representative will contact you about this shortly.

Leave a review of this product!

If you've used this product, log in and leave a review to tell us and other customers what you thought about it.

Login or Register