$1,049.95/Each

Ships free with Plus
  • Compact, 30 liter design pumps up to 12 liters per minute and clamps to a tank for easy operation
  • Intuitive, touch temperature controls and a large LCD backlit display
  • 3 preset, adjustable temperatures for consistency, efficiency, and ease of use
  • Pump-flow regulation, auto-restart, and a stainless steel heating pump and coil for dependability
  • Maximum temperature of 200 degrees Fahrenheit with +/- 1 degree temperature control; 120V, 1100W
UPC Code: 021614057075
Shipping:

You May Also Need

Engineered for superior precision, the PolyScience 7306AC1B5 sous vide Professional Classic Series immersion circulator head is a compact, yet powerful workhorse fit for any commercial kitchen.

Robust, accurate, and ready for the bustling commercial kitchen, this PolyScience immersion circulator head is for the serious chef. It heats up to a maximum of 200 degrees Fahrenheit and boasts a temperature stability of +/- 1 degree Fahrenheit. It even features adjustable speeds, so that you have maximum precision and control over cooking. Because it's from PolyScience, this immersion circulator head is built to last and get the job done not just well, but with finesse.

  • ETL Sanitation

    ETL Sanitation

    This item meets the sanitation standards imposed by the ETL, a division of the Intertek Group.

  • CE Listed

    CE Listed

    This item complies with the standards imposed by the Conformance European (CE), a division of the Intertek group.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • UL Canada

    UL Canada

    This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL) for use in Canada.

  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

Easy & Accurate

It boasts easy, one-touch temperature controls, which dial the heat up to 200 degrees Fahrenheit with a temperature stability of +/- less than 1 degree Fahrenheit. This accuracy results in consistent, high-quality cooking, whether you're cooking delicate seafood or a hearty cut of beef. The circulator head is even programmed with 3 preset temperatures to help you get started, which is great for efficiency-conscious operations and sous vide novices.

Adjustable Speeds

This particular unit circulates up to 12 liters of water per minute and features an adjustable 2 speed flow rate; simply switch between the high and low settings for ultimate cooking control. With pump-flow regulation, the circulator head operates consistently to make sure that your product is cooked to perfection.

Built to Last

To simplify operation, the unit includes an auto-restart feature and a high-grade stainless steel heating coil and pump. These heavy-duty components help reduce maintenance and optimize longevity. Plus, for flexibility, the head securely clamps to any flat or rounded tank (sold separately) surface. It requires a 120V electrical connection for operation.

Polyscience Sous Vide Immersion Circulator Classic

This video covers all of the Polyscience Immersion Circulator's most useful features and explains how it can aid you in sous vide cooking!

Model 7306c: An Overview Hi i'm Philip Preston. I'm here to introduce the Polyscience Immersion Circulator, and this unit will pump heat and control a tank up to about 7 gallons or 28 liters and control very precisely plus or minus a few hundredths of a degree. To set the temperature, I just depress the set momentarily and turn the nob until I have the desired temperature I'm looking for. We'll just set it to 130 degrees Fahrenheit. I can then press the button again to enter that set point or the unit will accept the set point after just a few seconds and switch over to display actual fluid temperature. Now, I can also enter preset temperatures, and to do that, I could just go into the set mode and then push one of the preset- P1, P2, or P3- numbers. Now, anytime I need to access that set point, I can just push P1, P2, or P3 and immediately access my commonly used set points. To switch the unit between Fahrenheit and Centigrade is quite easy. There is a power switch on the back of the unit. I switch that off, I push and hold the center button and power it back on, and now it's defaulted to Fahrenheit. I switch it off, push and hold the P3 button while I'm powering it up, and it's now defaulted to Centigrade. The unit also has a local lockout feature. This feature allows me to push and hold the set button, and after approximately ten seconds, the display will read "LLO." That signifies that the unit is in a local lockout mode, and local lockout prevents any inadvertent change of set point. I can no longer change the set point of this unit. To cancel the local lockout is exactly the same procedure. I just push and hold the set button for approximately ten seconds, and the display will switch to "CAn." I have now cancelled the local lockout. When the unit is operating, it is normal for this heat light to pulse showing you that the unit is in a heating mode and applying just the amount of heat necessary for the application. On the front panel is also a safety system. This system allows you to set a safety shut off point. If I was working with water, I would set this to 100. This is calibrated in degrees Centigrade, so this is telling you the point in which this unit will shut off. It's that redundant fail-safe system. It also will be activated in the event of a low liquid level condition. Now on the rear of the unit, would be where the power cord attaches to the unit. When you get your unit, ensure that you insert this fully. Also, there is the main power switch and a switch for two-speed pumping. At high speed, this will pump at a rate of 15 liters per minute. At low speed 7 liters per minute. Most commonly in sous vide cooking, you would have this switched to the high speed. You would only switch it to low speed if you were working with something delicate, such as poaching eggs. That's the Polyscience Immersion Circulator, an excellent tool for sous vide cooking.

Copy and paste the embed code above.

Compare to Other Products

Overall Dimensions:
  • Width: 5 3/4 Inches
  • Depth: 4 5/8 Inches
  • Height: 12 1/4 Inches

Attention CA Residents: Prop 65 Warning

Resources and Downloads for
PolyScience 7306AC1B5

Specsheet Specsheet Manual Manual

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register