Scratch and Dent Avantco SL312 12" Manual Gravity Feed Meat Slicer - 1/3 hp

Well worth the money. I have waited before writing this review and after owning the slicer for 4 years next month I feel I can give a pretty accurate review. I use this about every 6 weeks to slice roughly 100 pounds of partially frozen beef and pork, whole ribeye roasts and pork loins, so it gets a workout. Have never had one problem with it and slices great. I have sliced from almost see thru thin to 1/2" thickness. Very consistent, but keep in mind that the thickness will appear different between thawed meat and frozen. Cleaning, yes, it does take a bit of work to give it a good detailed cleaning. If you use the right tools and don't over torque the screws when putting it back together, you will never have a problem. I take the bottom tray off (5 screws) and then you can the the 2 shroud nuts off which makes cleaning so much easier. Blade screws should be Swedish torque (nicensnug), not German torque (goodntight). Well worth the 20 minute clean.

The slicer worked great for 13 months and then the motor went out. As we use it 5 days a week, we needed a replacement fast. Good luck with that, all the sites including Webstaruant were out of stock on this motor. The motor is expensive. So, looks like you have to buy a whole new unit since you cant get the motor in a reasonable amount of time. I would not recommend. Unit 1 month out of warrantee.

After a recommendation from a friend, I decided to have a look at the Avantco SL310 slicer to replace a cheap slicer for my home kitchen use where I slice meat 2 or 3 times a week. I wanted something durable that could slice deli thin slices or thicker as needed and something that would last me for a LONG time. I decided to give the Avantco a try and I'm glad I did. After using this slicer for several months I am convinced that it will last me for a LONG time and I am quite satisfied with it. It's durable and easy to use. In my opinion this slicer is rather easy to clean. There are two twist off knobs require to remove the slider and the blade face plate and then three phillips head screws to remove the blade.  Read More

I have several of these slicers. They work really well. Only downfall is that they are hard to get completely cleaned.

Outstanding value for the price! Large enough to hold a brisket in the carriage and a wide range of thickness selections from paper thin to over 1/2". My only complaint is the meat guard on the back of the blade does not sufficiently match the profile of the blade to keep stray meat from being pulled behind the blade. Other than that I would not hesitate to purchase again or recommend this Avantco slicer.

The Avantco SL310 10" Manual Gravity Feed Meat Slicer - 1/4 hp is a great product for the prices. It is easy to use and although basic suits all of our needs in a small restaurant/deli

Went to use this slicer and after the first use, slid the slicer over to clean underneath it. One of the feet broke off while sliding it across the stainless steel table. Contacted WebstaurantStore and they said this was product abuse and would not cover any repairs! PLEASE NOTE ALL HEAVY SLICERS MUST ME LIFTED CAREFULLY TO CLEAN UNDERNEATH AS SLIDING WILL VOID WARRANTY!

The job that this does is amazing. For that portion, I give it 5 stars. But, the black plastic "pusher handle" is POORLY AND CHEAPLY manufactured. If you screw it tight on the slider tray, the little plastic threads inside the handle strip right off and the handle won't stay on. The black plastic handle screws on to a metal screw...so, plastic screwing on to metal wasn't the most brilliant design. The Webstaurant Store wanted to ship me a new plastic handle... Geez, the thing only weighs a few ounces. The shipping charges are a major rip-off. Instead, I took the old handle, along with the tray framework that the handle screws on to, down to a local metal fabrication shop. This will now last a lifetime, I got stainless steel.

have used for years - multiple times weekly. WE do not sliced daily - but it has held up great and ive only sharpened it once or twice - holds it edge well.

We use only 2-3 months and now it’s broken. We use another one from another store it’s work almost a year. I think this one is low quality.

cheaply made. the foot broke off after six months and can't be repaired. They wont cover it under warranty saying it is "damaged". Well, may be if it want so cheaply made the metal would not break under normal use. Now I have to how the whole thing away.

We just ordered it late May this year and it already stopped working. It has been only 4 months. We only use it 3,4 times a week.

I bought this slicer to make my life easier... unfortunately, it has done the opposite. It is very difficult to clean - even though I spent the extra money to get the cleaning kit. When slicing it spits product out the sides and the top that get caught up in the blade... truly a mess and truly messy. DO NOT BUY.

I've only used this a few times so far, but it's been awesome. Slicing things super see-through thin and thicker with no problems. I almost got the bigger motor model but I think that would have been a waste of money and this guy works great.

Slicey slicey slicey! It's slice city over here at the restaurant ever since we got this slicer. We alive bacon. And we slice arrows. And we slice carrots. We slice ham. It's more than good. It's grrrrrrrrereeat!

This slicer Avantco SL 312 12” manual is very good deal , fast delivery and soo easy the assembly, every part is good and easy to use . I think is the best for the price and I compared a lot of slicer before buy it.

Great slicer. It is easy to clean and easy to work. Blade stays sharp and have never had a problem with it. Wish the power plug was longer.

Love this! Just used, cleaned & reassembled for the first time. Sliced an eye of round into paper thin slices with no problems. Cleaning it properly is a 15 minute job, but I'm super fussy. Actually cleaning it was not as bad as I expected. This is a quality piece of equipment, I'm very pleased!

For a light duty slicer, you can't beat the price. Light duty by my definition means I have to take time to clean it. A cut proof glove is a must for cleaning this thing. The cleaning kit helps with the every day wipe down, but if you slice something fatty (bacon) then you'll want to clean it down deep which takes some doing. As far as actual slicing goes, this thing definitely holds it's own. The carriage has smooth action and the slices are clean.

This is one of the great investment I made for my kitchen. It is very easy to use, to clean and most of all is it very compact. Higly recommend for small space.