Hatco PMG-200 Powermite Natural Gas Booster Heater for Conveyor Dishwashers - 195,000 BTU
Item number 413pmg200nMFR number PMG-200 NAT
$12,848.55/Each
Ships free with
Earn up to $385.46 back (38,546 points)with a Webstaurant Rewards Visa® Credit Card
Installation Services
Usually Ships in 3-4 Weeks from manufacturer
Lead times vary based on manufacturer stock
Product Overview
- 5 gallon storage capacity
- 195,000 BTU
- Stainless steel tank; 6 tube type burners
- Natural gas
Works With
$235.40/Each
$184.00/Each
$88.49/Each
Out Of Stock
- Quantity
- 1/Each
- Shipping Weight
- 262.5 lb.
- Width
- 36 Inches
- Depth
- 20 3/4 Inches
- Height
- 31 Inches
- Amps
- 3 Amps
- Voltage
- 120 Volts
- Wattage
- 360 Watts
- Features
- Made in America
- Flow Rate
- 258 - 602 GPH
- Gas Connection Size
- 3/4 Inches
- Power Type
- Natural Gas
- Tank Capacity
- 5 Gallons
- Total BTU
- 195,000 BTU
- Usage
- Medium Duty
Hatco PMG-200 NAT Details
Thanks to its powerful, 195,000 BTU heating system and ample 5 gallon tank, this Hatco PMG-200 Powermite natural gas booster heater provides all of the hot final rinse water you need to properly sanitize and flash-dry dishes and flatware. The Hatco PMG-200 Powermite booster heater is designed for use with large, industrial sized conveyor dishwashers. Its innovative burner system uses both primary and secondary air for consistent ignition every time.
Water Quality Requirements: Incoming water exceeding 3.0 grains of hardness per gallon (GPG) must be treated and softened before being supplied to the booster heater. Water containing over 3.0 GPG will decrease the efficiency and reduce the operating life of the unit. Product failure caused by liming or sediment buildup is not covered under warranty.
Overall Dimensions & Specs:
Width: 36"
Depth: 20 3/4"
Height (including legs): 31"
Water Temperature Recovery @ 40 Degrees Fahrenheit Rise: 452 GPH
Water Temperature Recovery @ 70 Degrees Fahrenheit Rise: 258 GPH
This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
Attention CA Residents:
CSA Blue Flame, Canada
This product has been certified by the Canadian Standards Association (CSA) to meet requirements for gas-fired products in Canada.
CSA Design, US
This item has been certified by the Canadian Standards Association (CSA) to meet applicable certification requirements for gas-fired products used in the United States.
3/4" Gas Connection
This unit comes with a 3/4" gas connection to be installed by a professional.
Made in America
This item was made in the United States of America.
UL Classified EPH
This product has been certified by the Underwriters Laboratories (UL) to meet applicable ANSI/NSF standards and / or other food equipment hygiene codes and requirements.
Questions & Answers
Looking For Specific Info? Get quick answers to product questions with our AI-powered search.
Frequently Asked Questions From Customers
Need Parts & Accessories?
Show replacement parts and accessories for Hatco PMG-200 NAT today!
Resources and Downloads for
Hatco PMG-200 NAT
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Warranty Info
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. Your warranty will be voided if installed in non-commercial or residential applications.
Resources