Ensure that your high-temp dish machine is up to standard a Hatco booster heater. A Hatco booster ensures that your dishwasher has a final rinse temperature that is hot enough for proper dish sanitation, keeping water temperatures within 180 to 195 degrees Fahrenheit. Available in gas and electric versions, Hatco booster heaters are the best way to keep your glassware and dishware properly sanitized. We carry a variety of sizes, ranging from small volume 5 gallon models, moderate use 6 gallon units, and high dish load 16 gallon boosters. Many of these models are UL and NSF listed to meet safety and sanitation standards.
Hatco booster heaters are factory pre-plumbed and pre-wired with a calibrated immersion thermostat and high temperature limit switch. Fiberglass insulation helps prevent heat loss, and features like swing away front panels with a low water cut off and control fuses make for easier machine servicing. These water booster heaters are factory preset to raise temperatures to either 40 or 70 degrees Fahrenheit. Features like temperature monitoring and insulation help monitor and combat heat loss which can occur as water is transported through pipes to the washer.
Also make sure to check out other great items from Hatco.