$6,000.00/Each

This product is no longer available. We've left this page up for reference only.

Usually Ships in 3-4 Months from manufacturer

Lead times vary based on manufacturer stock

Product Overview

  • 50 lb. oil capacity
  • SMART4U 3000 temperature controls
  • Four 6" diameter tubes
  • 100,000 BTU / hour
  • Stainless steel fry pot
  • Includes two fry baskets
  • Wide cold zone
  • Natural gas

Shipping Restrictions

This item cannot ship to CO, DC, MA, NJ, NV, NY, OR, RI, VT or WA
UPC Code:400011673192
View all Frymaster Gas Fryers

Frymaster HD50GS NAT Specs

Quantity
1/Each
Shipping Weight
180 lb.
Width
15 1/2 Inches
Depth
31 1/4 Inches
Height
45 Inches
Fry Pot Width
14 Inches
Fry Pot Depth
14 Inches
Fry Pot Height
3 1/2 Inches
Amps
1 Amp
Hertz
60 Hz
Phase
1 Phase
Voltage
120 Volts
Burner Style
Tube
Cabinet
Stainless Steel
Capacity
50 lb.
Features
Energy Star Qualified  Made in America  NSF Listed  Programmable Controls
Gas Connection Size
3/4 Inches
Number of Fry Baskets
2 Fry Baskets
Number of Fry Pots
1 Fry Pot
Plug Type
NEMA 5-15P
Power Type
Natural Gas
Split Pot
Without Split Pot
Total BTU
100,000 BTU
Type
Gas Floor Fryers

Frymaster HD50GS NAT Details

The ideal combination of efficiency and volume, the Frymaster HD50G natural gas 50 lb. Decathlon floor fryer is an excellent addition to any restaurant looking to increase profits from chicken tenders, French fries, and other popular fried foods! This tube type fryer has four 6" diameter tubes that provide 36% more surface area for heat transfer, resulting in extended oil life, low gas consumption, and less heat loss.

This fryer features simple SMART4U 3000 controls to let you make almost instant adjustments to your cooking cycles. They also ensure pinpoint accuracy when measuring oil temperature while allowing for high production and fast recovery times.

For easy cleaning and draining, this floor fryer has a wide cold zone with a 1 1/4" full port IPS ball-type drain valve and 3" drain line. The tank's bottom slopes forward to help collect and remove sediment from the fry pot, and this unit's front, sides, and doors are made of stainless steel for long-lasting durability.

- SMART4U 3000 controls

- 100,000 BTU

- 14" x 14" x 3 1/2" fry area

- Electronic ignition

- Melt cycle and boil-out mode

- 6" steel legs

- 120V electrical connection required

Overall Dimensions:
Left to Right: 15 1/2"
Front to Back: 31 1/4"
Height: 45"

Please Note: For all orders shipping outside of the United States a 15% upcharge will be applied.

Attention CA Residents:

Customer questions about this product

Is this cooking equipment available in all 50 states?

Due to energy regulations this cooking equipment is not available in Colorado, District of Columbia, Massachusetts, Nevada, New Jersey, New York, Oregon, Rhode Island, Vermont, and Washington.

My business is at a high elevation; does this change anything when I order gas cooking equipment?

Many gas equipment manufacturers need to make adjustments to the equipment so it operates correctly at elevations over 2,000 feet. Sometimes we can special order from the manufacturer and have your cooking equipment delivered ready-to-go, but in cases where your unit is in stock and waiting to ship, you’ll need to have a qualified service technician come to your location and alter your unit at the time of installation so that it is compatible with a higher elevation. Contact our Special Orders team prior to placing your order, and we will let you know what will work best for the equipment you are planning to purchase.
Ask your own question!
  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

  • Energy Star Qualified

    Energy Star Qualified

    This item has been Energy Star Qualified by the US Environmental Protection Agency and the US Department of Energy, making it an energy-efficient product.

  • 3/4" Gas Connection

    3/4" Gas Connection

    This unit comes with a 3/4" gas connection to be installed by a professional.

  • CSA Design, US

    CSA Design, US

    This item has been certified by the Canadian Standards Association (CSA) to meet applicable certification requirements for gas-fired products used in the United States.

  • NSF Listed

    NSF Listed

    This item has been certified by NSF International to meet applicable product standards on public safety, health, and / or the environment.

  • CSA Blue Flame, Canada

    CSA Blue Flame, Canada

    This product has been certified by the Canadian Standards Association (CSA) to meet requirements for gas-fired products in Canada.

  • CSA, US and Canada

    CSA, US and Canada

    This product has been certified by the Canadian Standards Association (CSA) to meet select standards for electrical, plumbing, and/or mechanical products in the United States and Canada.

  • Made in America

    Made in America

    This item was made in the United States of America.

Need Parts & Accessories?

Show replacement parts and accessories for Frymaster HD50GS NAT today!

Resources and Downloads for
Frymaster HD50GS NAT

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

Please note that this item is subject to a 15% export warranty administration fee for all international orders.
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. Your warranty will be voided if installed in non-commercial or residential applications.

Resources

  • NSF International
  • Top 10 Energy Conservation Tips for Restaurants
  • ENERGY STAR Appliances and Rebates
  • How to Choose the Best Commercial Deep Fryer