Frymaster HD50G Natural Gas 50 lb. High Efficiency Decathlon Floor Fryer with CM3.5 Controls

Item number  369hd50gcnMFR number  HD50GC NAT

This Product is no longer available

Browse our full selection

See more products

$5,800.00/Each

This product is no longer available. We've left this page up for reference only.

Product Overview

  • 50 lb. capacity with 2 twin fry baskets
  • CM3.5 programmable touchpad control with cooking time LED and audible alarm
  • 6" diameter tubes provide more surface area for greater heat transfer and extended oil life
  • 1 1/4" ball type full port drain makes it easy to remove used oil
  • Durable stainless steel fry pot

UPC Code:400011672607

Frymaster HD50GC NAT Specs

Quantity
1/Each
Shipping Weight
180 lb.
Width
15 1/2 Inches
Depth
31 1/4 Inches
Height
45 Inches
Fry Pot Width
14 Inches
Fry Pot Depth
14 Inches
Fry Pot Height
3 1/2 Inches
Amps
1 Amp
Hertz
60 Hz
Phase
1 Phase
Voltage
120 Volts
Burner Style
Tube
Cabinet
Stainless Steel
Capacity
50 lb.
Features
BPI Certified Energy Star Qualified Kosher Made in America NSF Certified Programmable Controls
Gas Connection Size
3/4 Inches
Max Seating Capacity
2 Chairs 4 - 6 Chairs
Number of Fry Baskets
2 Fry Baskets
Number of Fry Pots
1 Fry Pot
Plug Type
NEMA 5-15P
Power Type
Natural Gas
Split Pot
Without Split Pot
Total BTU
100,000 BTU
Type
Gas Floor Fryers

Frymaster HD50GC NAT Details

The ideal combination of efficiency and volume, the Frymaster natural gas 50 lb. Decathlon floor fryer is an excellent addition to any restaurant looking to increase profits from chicken tenders, French fries, and other popular fried foods! This tube type fryer has four 6" diameter tubes that provide 36% more surface area for heat transfer, resulting in extended oil life, low gas consumption, and less heat loss. It boasts an output of 100,000 BTU and a 14" x 14" x 3/12" fry area.

This fryer features an electronic ignition and simple CM3.5 controls to let you make almost instant adjustments to your cooking cycles. They also ensure pinpoint accuracy when measuring oil temperature while allowing for high production and fast recovery times. For easy cleaning and draining, this floor fryer has a wide cold zone with a 1 1/4" full port IPS ball-type drain valve and 3" drain line, while its melt cycle and boil-out mode ensure convenient maintenance. The tank's bottom slopes forward to help collect and remove sediment from the fry pot, and this unit's front, sides, and doors are made of stainless steel for long-lasting durability. Better yet its 6" steel legs make it easy to clean under the unit. This fryer requires a 120V electrical connection and a natural gas connect for use.

Overall Dimensions:
Left to Right: 15 1/2"
Front to Back: 31 1/4"
Height: 45"

Please Note: For all orders shipping outside of the United States a 15% upcharge will be applied.

Attention CA Residents:
  • CSA

    CSA

    This product is certified by CSA to applicable Canadian standards.

  • NSF Certified

    NSF Certified

    This item is certified by NSF to applicable standards.

  • CSA, US and Canada

    CSA, US and Canada

    This product is certified by CSA to applicable U.S. and Canadian standards.

  • 3/4" Gas Connection

    3/4" Gas Connection

    This unit comes with a 3/4" gas connection to be installed by a professional.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • CSA, US

    CSA, US

    This product is certified by CSA to applicable U.S. standards.

  • Energy Star Qualified

    Energy Star Qualified

    This item has been Energy Star Qualified by the US Environmental Protection Agency and the US Department of Energy, making it an energy-efficient product.

  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

Need Parts & Accessories?

Show replacement parts and accessories for Frymaster HD50GC NAT today!

Find Parts for this Item

Resources and Downloads for Frymaster HD50GC NAT

A PDF viewer is required to view this product's information. Download Adobe Acrobat softwareOpens in new tab

Warranty Info

Please note that this item is subject to a 15% export warranty administration fee for all international orders.
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. Your warranty will be voided if installed in non-commercial or residential applications.

Customer Reviews