Fuel Type: Natural Gas
Installation Services
Product Overview
- Durable full angle iron frame with 6" adjustable stainless steel legs
- 5 racks that can hold (5) 18" x 26" baking pans in left to right or front to back positions
- Dual flow gas system combines direct and indirect heat
- Interior lights for convenience
- 14 gauge double-sided porcelainized baking compartment liner for easy clean up
- Temperature range from 200 - 500 degrees Fahrenheit and solid state infinite controls
- Removable dual tube burners; 1/2 hp blower motor
- 45,000 BTU; natural gas
Works With"Works With" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.
$56.99/Case
$51.99/Each
$119.99/Each
- Quantity
- 1/Each
- Shipping Weight
- 604 lb.
- Width
- 38 1/4 Inches
- Depth
- 36 7/8 Inches
- Height
- 38 Inches
- Interior Width
- 29 Inches
- Interior Depth
- 28 1/4 Inches
- Interior Height
- 20 Inches
- Amps
- 6 Amps
- Hertz
- 60 Hz
- Phase
- 1 Phase
- Voltage
- 115 Volts
- 18 x 26 Pan Capacity
- 5 Pans
- Control Type
- Dial
- Features
- Draft Diverter Made in America NSF Listed Spark / Piezo Ignition
- Gas Connection Size
- 3/4 Inches
- Horsepower
- 1/2 HP
- Installation Type
- Freestanding
- Maximum Temperature
- 500 Degrees F
- Number of Chambers
- 1 Chamber
- Number of Decks
- Single
- Number of Doors
- 2 Doors
- Number of Racks
- 5 Racks
- Oven Interior Style
- Deep Depth
- Plug Type
- NEMA 5-15P
- Power Type
- Natural Gas
- Size
- Full Size
- Temperature Range
- 200 - 500 Degrees F
- Total BTU
- 45,000 BTU
Blodgett ZEPH200G ADDL Details
Cooking your bakery's famous streusels, muffins, donuts, and bread will never be easier than with this Blodgett ZEPHAIRE-200-G natural gas additional model bakery depth convection oven! As an additional unit, this convection oven comes configured with a vent connector included so that it can be easily installed with an existing base unit. Boasting a sturdy iron frame with a stainless steel top and 6" adjustable legs, this oven is sure to bring stability and functionality to your kitchen. It features solid state infinite controls with a digital timer and also includes a draft diverter at no additional cost to ensure that your kitchen is properly ventilated.
Thanks to a two speed fan and 1/2 hp blower motor, this convection oven efficiently recirculates heated air through its interior compartment, which reduces energy consumption and increases performance. This system offers a cost-effective way of cooking your product at a lower temperature for a shorter amount of time, allowing you to get food to the tables faster.
The powder-coated handle provides a comfortable grip while operating two dependent doors, which are tightly secured to the frame with a triple-mounted pressure lock design. The interior features five chrome-plated racks that can be configured into eleven rack positions with a minimum of 1 5/8" spacing to ensure that you are getting the most out of your oven, which has the ability to hold up to (5) 18" x 26" standard full size baking pans. In bakery depth ovens, you can arrange the racks in either left to right or front to back positions allowing for a "staggered" effect that improves airflow during baking. A 14 gauge double-sided porcelainized baking compartment liner allows for easy clean up of your unit. As an added benefit, the interior is illuminated, giving you the ability to check on your product without opening the doors and letting excess heat escape.
The oven is heated through a dual flow gas system that combines direct and indirect heat with removable dual tube burners. The gas shutoff valve on the front provides easy accessibility while the control system boasts electronic spark ignition for ease of use. The unit is controlled by a thermostat with a temperature range from 200 to 500 degrees Fahrenheit, which gives you the ability to prepare a wide variety of products. For safety, the blower motor has an automated thermal overload protection mechanism and a control area cooling fan. This unit requires natural gas for operation.
Overall Dimensions:
Left to Right: 38 1/4"
Front to Back: 36 7/8"
Height (without ventilation): 38"
Height (with draft diverter): 45 3/8"
Interior Dimensions:
Left to Right: 29"
Front to Back: 28 1/4"
Height: 20"
This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
Customer questions about this product
My business is at a high elevation; does this change anything when I order gas cooking equipment?
Made in America
This item was made in the United States of America.
ETL, US & Canada
This product has been certified by ETL, a division of the Intertek Group, to meet applicable electrical product safety standards required for use in the United States and Canada.
5-15P
This unit comes with a NEMA 5-15P plug.
NSF Listed
This item has been certified by NSF International to meet applicable product standards on public safety, health, and / or the environment.
3/4" Gas Connection
This unit comes with a 3/4" gas connection to be installed by a professional.
Need Parts & Accessories?
Show replacement parts and accessories for Blodgett ZEPH200G ADDL today!
Resources and Downloads for
Blodgett ZEPH200G ADDL
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Warranty Info
Please note there is an 8% administrative warranty fee and potential for additional export fees for units that are shipped outside of the United States
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. Your warranty will be voided if installed in non-commercial or residential applications.