$9,146.00/Each

Contact us for details

Ships free with Plus

Call 717-392-7472(Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST)

Why do we do this?

Earn up to $274.38 back (27,438 points)with a Webstaurant Rewards Visa® Credit Card

Installation Services

Check if installation is currently available for your area.

Enter ZIP Code >

Usually Ships in 4 Weeks from manufacturer

Lead times vary based on manufacturer stock

Not eligible for expedited shipping

Product Overview

  • Top holds (6) 1/6 and (2) 1/2 size pans (included)
  • Heavy-duty pan supports keep your pans securely in place
  • Stainless steel front, sides, top, and drawers
  • CFC and HCFC-free foamed-in-place polyurethane insulation
  • Insulated lids help maintain safe food temperatures and optimal sanitation
UPC Code:400010806706

Beverage-Air SPED72HC-12M-6 Specs

Quantity
1/Each
Shipping Weight
410 lb.
Width
72 Inches
Depth
36 5/8 Inches
Height
45 1/2 Inches
Nominal Width
72 Inches
Amps
9.6 Amps
Hertz
60 Hertz
Phase
1 Phase
Voltage
115 Volts
1/6 Size Pan Capacity
12 Pans
Access Type
Drawers
Capacity
21.5 cu. ft.
Casters
With Casters
Compressor Location
Bottom Mounted
Compressor Style
Side / Rear Breathing
Construction
Stainless Steel and Aluminum
Features
Made in America
Horsepower
1/3 HP
Number of 1/6 Size Pans Included
6 Pans
Number of Drawers
6 Drawers
Plug Type
NEMA 5-15P
Refrigerant Type
R-290
Refrigeration Type
Air Cooled
Style
Counter Height
Temperature Range
33 - 40 Degrees F
Top Type
Mega Top  Workstation Refrigerators

Customer questions about this product

Does Beverage-Air warrant this item for use in a food truck?

This item is covered under Beverage-Air's warranty contingent upon the unit being kept in a controlled climate. This means that the interior of the food truck may not be susceptible to extreme high or low temperatures. If warranty service is required, the truck must be able to sit stationary for 24-48 hours to allow for a technician to service the equipment.

How do I know if this unit will fit under or match the height of my ADA-height counter?

Many manufacturers offer their refrigeration equipment in several different height options to best meet your needs. Here's a breakdown of how we classify these different heights:

Counter Height: Work surface is more than 34" high; standard-height unit.

ADA Height: Work surface height is 34" or less; complies with ADA regulations.

Low Profile: Work surface height is less than 32"; designed to fit under most ADA-height counters.

If the unit you are purchasing does not have a flat top, such as a worktop or sandwich/salad prep table, it may affect whether or not it will align with certain countertops. To ensure that the product will meet your needs, please reference the product's literature and specifications.

I haven’t heard of R-290, R-600a, R-513a, or R-448A refrigerant before. What is it?

R-290 (also known as high purity propane or CARE 40) and R-600a (also known as refrigerant grade Isobutane or CARE 10) are hydrocarbon refrigerants. R513a (also known as Opteon XP10) and R-448A (also known as Solstice N40) are HFO (hydrofluoroolefin) refrigerants. They are being used by some manufacturers in response to the EPA’s Significant New Alternatives Policy (SNAP) Program.

What does the “H” or “HC” mean in the newer Beverage-Air model numbers?

This is a representation that the unit is using a “Hydrocarbon” refrigerant. This would include both R290 and R600a refrigerants. They are being used as an eco-friendly refrigerant by Beverage-Air in response to the EPA’s Significant New Alternatives Policy (SNAP) Program. Read more about this program in our blog post on Refrigerant Regulations.

What kinds of pans can I use in my refrigerated prep table?

While various configurations combining traditional 1/3 size, 1/6 size, and other food pan sizes are possible, it's important to refer to your equipment's Specification Sheet and/or Owner's Manual to see what pan sizes and configurations are recommended. Certain accessories may be needed in order to use pans of a different size than what is recommended. It is also important to note that mixing and matching pans from different manufacturers may result in the pans not fitting properly.

Ask your own question!

Beverage-Air SPED72HC-12M-6 Details

The Beverage-Air SPED72HC-12M-6 Elite Series 72" 6 drawer mega top sandwich / salad prep table is designed to keep your freshest toppings and ingredients close at hand at food-safe holding temperatures. Boasting a 10" deep removable polyethylene cutting board, it's perfect for building your signature sandwiches, subs, and salads. Thanks to the mega top design, this prep table boasts enough space for (6) 1/6 and (2) 1/2 size pans (included) along its top rail. Plus, it comes with heavy-duty pan supports to ensure that the pans remain securely in place to prevent food spillage.

To the right of the pans is 40" of countertop space, ideal for storing countertop slicers, food processors, and vegetable prep equipment. For additional refrigerated storage space, the top and bottom drawers hold 6" deep food pans (sold separately).

The table's high-capacity refrigeration system with 1/3 hp compressor runs on eco-friendly R290 refrigerant. This specialized refrigerant has an ozone depletion potential (ODP) of 0 and a global warming potential (GWP) of 3, making it an environmentally-responsible choice for your business. To ensure temperature retention and optimal energy efficiency, the cabinet features CFC and HCFC-free foamed-in-place polyurethane insulation. The top rail lid is also insulated, so your ingredients can remain fresh when the table is not in use.

Built for heavy commercial use, this unit features a stainless steel front, sides, top, and drawers. Its interior liner is made of aluminum for exceptional corrosion resistance and protection against rust. Four heavy-duty 6" casters (2 locking) are also included for easy mobility throughout your facility. A 115V electrical connection is required for operation.

Overall Dimensions:
Width: 72"
Depth: 36 5/8"
Height: 45 1/2"
Capacity: 21.5 cu. ft.

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

  • UL Classified EPH

    UL Classified EPH

    This product has been certified by the Underwriters Laboratories (UL) to meet applicable ANSI/NSF standards and / or other food equipment hygiene codes and requirements.

  • UL Listed, US & Canada

    UL Listed, US & Canada

    This product has been certified by the Underwriters Laboratories (UL) to meet applicable safety standards required for use in the United States and Canada.

  • UL Sanitation

    UL Sanitation

    This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).

  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

  • Made in America

    Made in America

    This item was made in the United States of America.

Resources and Downloads for
Beverage-Air SPED72HC-12M-6

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

Note: Beverage Air equipment purchased in 2013 or later will have a 3 year parts and labor warranty. Equipment purchased prior to 2013 will have a 1 year parts and labor warranty. RESIDENTIAL USERS: Your warranty will be voided if installed in non-commercial or residential applications.