$2,203.85/Each
Ships free with PlusEarn up to $66.12 back (6,612 points)with a Webstaurant Rewards Visa® Credit Card
Other Available Voltages:
Installation Services
Product Overview
- Heats water to 180 degrees Fahrenheit
- 3.2 gallon storage capacity; Stainless steel tank
- Comes with 6" legs
- Includes temperature/pressure relief valve
- Fiberglass insulation to prevent heat loss
- Low-water cut-off to prevent element burnout
- 480V, 3 Phase
Works With"Works With" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.
- Quantity
- 1/Each
- Shipping Weight
- 48 lb.
- Width
- 11 3/4 Inches
- Depth
- 12 7/8 Inches
- Height
- 18 1/2 Inches
- Amps
- 13.7 Amps
- Hertz
- 60 Hertz
- Phase
- 3 Phase
- Voltage
- 480 Volts
- Wattage
- 11 Kilowatts
- Features
- Made in America NSF Listed
- Flow Rate
- 65 - 114 GPH
- Plug Type
- Hardwire
- Power Type
- Electric
- Tank Capacity
- 3.2 Gallons
- Usage
- Light Duty
Customer questions about this product
Can this booster water heater replace a primary water heater?
Hatco MC-11 480/3 Details
The Hatco MC-11 Mini-Compact electric specialty booster water heater provides water at 180 degrees Fahrenheit for hot water sanitizing or point-of-use dispensing. The heater features a stainless steel tank with a storage capacity of 3.2 gallons and a fast recovery time. Made with a stainless steel front for aesthetic appeal, the other sides of the heater are powder-coated silver-gray, and the bottom and legs are black.
The water heater includes four 6" legs to get it up off the ground, fiberglass insulation to reduce heat loss and a temperature and pressure relief valve in case the water gets too hot or pressure reaches dangerous levels. The water heater also features a low-water cut-off system to prevent element burnout due to a low water condition.
Water Quality Requirements: Incoming water exceeding 3.0 grains of hardness per gallon (GPG) must be treated and softened before being supplied to the booster heater. Water containing over 3.0 GPG will decrease the efficiency and reduce the operating life of the unit. Product failure caused by liming or sediment buildup is not covered under warranty.
Overall Dimensions:
Width: 11 3/4"
Depth: 12 7/8"
Height (including legs): 18 1/2"
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
Made in America
This item was made in the United States of America.
UL Listed, US & Canada
This product has been certified by the Underwriters Laboratories (UL) to meet applicable safety standards required for use in the United States and Canada.
Hardwired
This product must be hardwired by a professional; it does not plug into a standard wall outlet.
NSF Listed
This item has been certified by NSF International to meet applicable product standards on public safety, health, and / or the environment.
Need Parts & Accessories?
Show replacement parts and accessories for Hatco MC-11 480/3 today!
Resources and Downloads for
Hatco MC-11 480/3
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Warranty Info
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. Your warranty will be voided if installed in non-commercial or residential applications.