• Free Shipping!  

$3,061.30/Each

  • 16 gallon storage capacity
  • Castone lined tank
  • Step loads to reduce energy consumption
  • 45 kW
  • 480V, 3 Phase

Quality Rating:

UPC Code:

400010492596

Condition:

New
Shipping:

Usually Ships in 1 Business Day
When will I receive my item?

White Glove Delivery - Available -

What is White Glove service?

Standard common carrier delivery options cover the cost of getting an item to your shipping address but our White Glove delivery service does that and more!

The White Glove agent will call to schedule a delivery appointment within a four hour window, which gives you the flexibility to work around your busy schedule and to prepare the space where your item will be placed. Upon delivery, trained professionals will unload your item from the truck, bring it into the room of choice, unpack the item and remove all packaging debris from the premises.

Please note that White Glove delivery will typically add 5 - 7 business days to your order's transit, and only includes 30 minutes of on-site time. If on-site time beyond 30 minutes is required, you may be responsible for additional fees. While the agents will bring the items into the location of your choice, this service does not include set-up of the items being delivered, such as installation of casters, shelves, or other accessories. Smaller items will not be unpackaged individually; they will be set in place and debris and packaging material will not be removed.

Custom Heat Lamps
Specs
Width 23 1/2 Inches
Depth 23 Inches
Height 31 3/8 Inches
Amps 54 Amps
Hertz 60 Hertz
Phase 3
Voltage 480 Volts
Wattage 45 Kilowatts
Flow Rate 258 - 452 GPH
Made in America Yes
NSF Listed Yes
Power Type Electric
Tank Capacity 16 gal.
Usage Heavy Duty

Customer questions about this product

Can this booster water heater replace a primary water heater?
No, it is not designed for that purpose. This unit should only be used as a secondary water heater.
Ask your own question!

Details

The space saving Hatco S-45 45 kW Imperial booster water heater has a 16 gallon capacity to provide plenty of hot final rinse water required to properly sanitize and flash-dry dishes and flatware.

The Hatco S-45 Imperial electric booster heater is factory pre-plumbed and pre-wired with a calibrated immersion thermostat and high-temperature limit switch. Fiberglass insulation minimizes heat loss, while the stainless steel front panel and powder coated body provide long-lasting durability. Swing-away front panels with low-water cut-off, control fuses, and transformer allow quick access to probes and elements for easier servicing.

To help reduce energy costs, this unit operates by step loading, or using its heating elements only as needed. When first turned on, the booster heater uses the first of its several heating element banks; as more demand is placed on creating hot water, the other banks of elements will begin to heat, one after another. This process limits how many elements are operating at any given time to ensure that energy is not wasted.

A sizing chart is included at the end of the Spec Sheet to help you match the correct booster heater to your needs. Quick ship is available for 480V/3 Phase models.

Water Quality Requirements: Incoming water exceeding 3.0 grains of hardness per gallon (GPG) must be treated and softened before being supplied to the booster heater. Water containing over 3.0 GPG will decrease the efficiency and reduce the operating life of the unit. Product failure caused by liming or sediment buildup is not covered under warranty.

Overall Dimensions & Specs:
Width: 23 1/2"
Depth: 23"
Height (including legs): 31 1/8"
Water Temperature Recovery @ 40 Degrees Fahrenheit Rise: 452 GPH
Water Temperature Recovery @ 70 Degrees Fahrenheit Rise: 258 GPH

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

  • NSF Listed

    NSF Listed

    This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • CE Listed

    CE Listed

    This item complies with the standards imposed by the Conformance European (CE), a division of the Intertek group.

  • UL C_Classified_US

    UL C_Classified_US

    This item has been evaluated by the Underwriters Laboratories (UL) to meet specific properties and a limited range of hazards for product safety.

  • Hardwired

    Hardwired

    This product must be hardwired; it does not plug into a standard wall outlet.

Spec Sheet Specsheet Manual Manual Warranty Warranty Brochure Brochure Brochure Brochure

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register