Traulsen: How to Install #1 Trayslides on G Series 1-Section Video

#1 Trayslides: How to Install on G-Series 1-Section. Hi, today i'll be showing you how to install our #1 Trayslides on a G-Series single section. Before installing the new trayslides, we must first remove the shelves inside. Next, unscrew all the pins inside. After all the pins have been removed, using a flathead screwdriver, go up and down the front and back panel of the cabinet popping out plugs now revealing the screw holes for the pilasters. After all the plugs have been removed, it's time to install the pilasters with the thumb screws. To determine which is which, make sure you check the first cut-outs for the trayslide inserts. The one with the smallest gap to the edge, that's the top. If the gap is bigger, that side goes on the bottom. There are two sets of pilasters: one set for the front left and back right, and one set for the front right and back left. After all the pilasters are installed, it's time to install the trayslides. Install the trayslides on one side from bottom to top. Once all the tray slides have been installed, you're done! Just double check to make sure the spacing is correct.